Search results
76
Case study
Testing rubber to materials standards
Requirement
Characterisation of materials is essential to have confidence in their performance in the manufactured products and components they are subsequently used in.
77
Case study
Spring design and manufacture
Requirement
Longcroft Engineering design and manufacture springs, from prototypes and hand-made custom designs, to high-volume production.
78
Case study
Alumina sphere crush test
Requirement
G.T. Michelli Co. serves a wide variety of industries and markets from petrochemical manufacturing to biomedical facilities.
79
Case study
Removal torque of 'squeeze and twist' child-resistant cap
Requirement
Reckitt-Benckiser are manufacturers of the distinctive HDPE (High Density Polyethylene) swan-neck 'Harpic' cleaning fluid bottles.
80
Case study
Watch bezel adjustment torque testing
Requirement
Since the revival of the mechanical watch industry during the mid 1980s enthusiasts have become ever more absorbed by mechanical chronometry, taking pleasure in comparing the performance of new and old models alike. The very finest
81
Case study
Laminated auto windshield perimeter seal peel testing
Requirement
The windshield (or windscreen) in your car is made of laminated glass, which is designed to offer the highest levels of safety in the event of a crash.
82
Event
Advanced Engineering 2021 - We would love to see you there!
Who should attend?
Engineering professionals and managers from advanced manufacturing sectors interested in quality assurance testing solutions.
What is the exhibition about?
83
Case study
Aircraft brake unit spring testing
Requirement
The Aircraft Wheels and Brakes department at British Airways plc are responsible for the repair and overhaul of the aircraft brake units on the Boeing 737, 747, 757, 777 and Airbus A319, A320 and A321 aircraft.
84
Case study
Solar panel peel testing
Requirement
A solar module, also called a PV or photovoltaic module and solar panel, is subjected to extreme conditions of temperature, ultraviolet radiation, rain, ice and wind throughout the year.
85
Case study
Torque testing beauty product closures
Requirement
A manufacturer of a wide range of skin, hair-care, make-up and sun-care products based in Greece needed to replace their outdated torque testers with up-to-date digital torque testers to guarantee production quality and to ensure t
86
Case study
Extruded Seal Deflection, Insertion and Extraction Forces
Requirement
Vintech Industries Inc. is a global Tier 2 supplier of thermoplastic extrusion components to the automotive and non-auto RV industry.
87
Case study
Glass syringe Luer lock attachment pull-off
Customised engineering example
Polycarbonate Luer Lock adapters are push-fitted to glass syringe nozzles with a friction fit. Quality assurance demands that they cannot come free under normal use.
88
Case study
Extreme sports waterproof bio-textile mechanical properties
Requirement
Amphibio Ltd develops bio-inspired materials technology for the outdoor and extreme sports industry.
89
Case study
Festive lighting masonry anchorage strength checking
Requirement
A number of local councils in the United Kingdom have adopted a new code of practice for the Installation, Operation and Removal of Seasonal Decorations.
90
Case study
Pneumatic top-load control for CRC cap torque testing
Customised engineering example
Testing the opening torque of child-resistant bottle caps requires the application of a simultaneous downward force to overcome the safety mechanism.
91
Case study
Edge Crush Test (ECT) of corrugated cardboard
Requirement
Introduction
Over the weeks of the 2020 global COVID-19 lockdown confinement, there has been a surge of home deliveries, with even e-commerce giants struggling to fulfil demands and hiring fleets of new workers.
92
Case study
ROPP bottle cap closure torque test
Requirement
Brothers Drinks manufacture and co-pack a wide range of alcoholic and non-alcoholic beverages with both Roll on Pilfer Proof (ROPP) and crown bottle caps.
93
Case study
End float test of inhaler cap
Requirement
'End float is the displacement in mm of a product', in this case the dispensing cap closure of the inhaler measured at a specific load.
94
Case study
Lighting weld test
Requirement
A simple, low-cost fixture was specified by the customer for the Quality Control Laboratory. This was to hold a lighting assembly in a test where the welded contacts were pulled off.
95
Case study
Peel testing identity cards
Requirement
The customer produces identity cards with a laminated cover. The customer wanted to know that the adhesive used to bond the laminate and card together was strong enough to withstand a high rate of day-to-day usage.
96
Case study
Seat belt locking device test
Requirement
The customer requested a system to measure the force required to release the locking mechanism of a car seat-belt whilst it is under tension.
97
Case study
Diamond-edged grinding and cutting tool break strength
Requirement
Diamond tools that enable highly precise and high-grade processing are used in various industries including automotive, IT and electronics.
98
Case study
Testing the strength of corrugated cardboard packaging
Requirement
Over the weeks of the COVID-19 lockdown confinement there has been a surge of home deliveries, with even e-commerce giants struggling to fulfil demands and hiring fleets of new workers. Hearing the knock at the door to receiv
99
Case study
Page pull strength test
Requirement
Mecmesin collaborated with a customer to design and develop a force measurement system to determine book binding adhesive strength in retaining individual pages.
100
Case study
Tamper-Proof Closure Test
Requirement
Alcoa required a system to quickly test the tamper-proof rings on soft drink and mineral water closures.
The system had to be easy to operate and allow caps to be loaded quickly.