Mecmesin | Search results

2576

^{[Page extract]}

CETIE Guide 3

This guide is for producers of quality sparkling wines who carry out the secondary fermentation process in the bottle, also known as bottle fermentation.

2577

^{[Page extract]}

BS EN 388

Abrasion resistance up to 8,000 cycles Blade resistance Tear resistance Puncture resistance

2578

^{[Page extract]}

ASTM D3166

This test method covers the measurement of fatigue strength in shear by tension loading of adhesives on a standard specimen and under specified conditions of preparation, loading, and testing.

2579

^{[Page extract]}

Carbon fibres, Mechanical properties of materials, Tensile strength, Tensile testing, Plastics, Impregnated materials, Yarn, Modulus of elasticity, Strain, Tensile strain, Loading, Reinforcing materials, Composite materials, Test equipment, Test specime

2580

^{[Page extract]}

ASTM D6797-07

This test method describes the measurement for bursting strength of woven and knitted textiles taken from rolls of fabric or fabric taken from garments.

2581

^{[Page extract]}

UL 486A-B

UL 486A-B is a safety standard that outlines the requirements for wire connectors and soldering lugs used with electrical conductors.

2582

^{[Page extract]}

BS EN 564

Mountaineering equipment, Mountaineering ropes, Cords, Outdoor sports equipment, Sports equipment, Diameter, Tensile strength, Safety measures, Equipment safety, Marking, Instructions for use, Diameter measurement, Weight measurement

2583

^{[Page extract]}

BS EN 61212-2

Laminates, Bars (materials), Pipes, Thermosetting polymers, Plastics, Polymers, Industrial, Solid electrical insulating materials, Electrical insulating materials, Reinforced materials, Circular shape, Rigid pipes, Dimensional measurement, Mechanical te

2584

^{[Page extract]}

ASTM C1684

This test method is for the determination of flexural strength of rod shape specimens of advanced ceramic materials at ambient temperature.

2585

^{[Page extract]}

BS EN 843-1

EN843-1 describes methods for determining the nominal flexural strength of advanced monolithic technical ceramic materials at ambient temperature.

2586

^{[Page extract]}

ASTM D903-98

ASTM D903 is a test procedure used to determine the strength of adhesive bonds.

2587

^{[Page extract]}

ISO 2493-1

Specifies procedures, based on the two-point loading principle, for determining the bending resistance of paper and board.

2588

^{[Page extract]}

ISO 13955

ISO 13955 is used to assess the cohesion of a PE pipe/electrofusion socket or saddle assembly. Applicable to pipes with a nominal outside diameter between 16 mm and 225 mm

2589

^{[Page extract]}

BS EN ISO 71-2

BS EN 71-2 covers the flammable materials which are prohibited in all toys and the requirements concerning flammability of certain toys when exposed to fire.

2590

Test Frame

Vortex-dv test frame

Vortex test frame A sturdy twin-column test frame capable of applying torque up to 10 N.m (90 lbf.in). Tall and wide enough to accept a variety of test specimens yet compact to use as a bench-top tester. View test frame

2591

^{[Page extract]}

ASTM D6243-09

This test method covers a procedure for determining the internal shear resistance of a Geosynthetic Clay Liner (GCL) or the interface shear resistance between the GCL and an adjacent material under a constant rate of displacement or constant stress.

2592

^{[Page extract]}

BS 373

Wood, Mechanical testing, Strength of materials, Test specimens, Specimen preparation, Moisture measurement, Density measurement, Physical property measurement, Static loading, Impact testing, Bend testing, Compression testing, Shear testing, Cleavage,

2593

^{[Page extract]}

TAPPI T 402

Standard conditioning and testing atmospheres for paper, board, pulp handsheets, and related products, Test Method TAPPI/ANSI T 402 sp-13

2594

^{[Page extract]}

ASTM D2527

ASTM D2527 covers the strength and appearance of the splice in vulcanized rubber-seal material of any size, type, or cross-sectional shape.

2595

Event

Tensile Testing: Basics, Tips and Trends

Have you ever wondered if the seatbelt in your vehicle is strong enough to restrain you in a collision? How about the average person pulling the cork out of a wine bottle?

2596

^{[Page extract]}

Cam grips

Cam grips - operate by virtue of one or two opposing eccentric cams increasing their clamping force upon the specimen as tensile load is applied.

2597

^{[Page extract]}

ISO 374-4

This document specifies the test method for the determination of the resistance of protective glove materials to degradation by dangerous chemicals with continuous contact.

2598

^{[Page extract]}

BS EN 14477

Packaging, Packaging materials, Flexible materials, Perforating tests, Mechanical testing

2599

^{[Page extract]}

ASTM D429-14

ASTM D429 is a test method used to determine the adhesion of rubber to metal substrates. It comprises 8 different tests: A through to H, covering tensile strength, peel and shear strength of the adhesion interface.

2600

Specials

Vector instruments - Intuitive touchscreens

Intuitive touchscreen The most advanced touchscreen force and torque gauges, powered by Vector OS. Handheld instruments built for tough environments to deliver accuracy and reliability.

Search results

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

Systems

Instruments

Systems

Instruments

Systems

Instruments

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}