Search results
976
Accessory
Blank (smooth) jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 30 mm
Mec240k-B
Blank Jaws (30mm x 30mm) - smooth steel jaw. Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = see datasheet for various spans according to the grip body selected.
Supplied as 0.5 set = 2 jaws (left…
977
Accessory
FINAT 2 Assisted Pull-Peel Table, 90 degrees, adjustable rails for float glass, QC-20
PDV15031
The FINAT 2 Assisted Pull-Peel table (90° Peel Test) is fitted to the anvil plate of a motorised test stand and then connected to the crosshead of a test stand. It is commonly used for conducting peel tests on adhesive tapes and films.
The carriage of…
978
Accessory
Dual Handswitches (locking type) for pneumatic grips
Mec205-3
Pneumatic grips are the ideal choice when performing tensile tests on sensitive materials that have a tendency to slip or break at point of clamping.
Mec205-3:
Locking dual handswitches open the jaws of the grip by pushing the lever and remain open after…
979
Accessory
Safety guard for fitting to MultiTest 2.5-i /-xt/-dV motorised test stands (500 mm)
432-682
Mecmesin's standard safety guards are designed to prevent access by the operator to the testing area whilst the test is in progress. Guards feature an aluminium frame with integrated polycarbonate panels to allow the operator to view the test area from…
980
Accessory
3/8" Lower Chuck Assembly for use on Helixa motor spindle
432-614
A standard self-centering 3-jaw chuck with key.
It has a maximum ⅜" (9.5mm) opening and is connected to the Helixa motor-drive spindle via an adaptor with quick-release grub-screw.
Used to secure a variety of test specimens for torque applications.
981
Accessory
Height Scale Bracket Kit for LCP/S Test Stand
432-159
Bracket Set only. Used for mounting of a Mitutoyo ABS-type Digital Height Scale to the lever-operated Manual Test Stand model LCP/S.
Note: Height-scale not included
982
Accessory
Smooth jaws for 20 kN Scissor Grip, 10 kN, 25 x 100mm
Mec11-20-B100
Blank Jaws (25mm x 100mm) - smooth steel jaw. Allows user to machine or affix own surface. By using 100 mm width jaws tensile force is reduced to 10kN.
Supplied as 0.5 set = 2 jaws (left…
983
Accessory
V-jaw vice clamp repair kit including replacement rubber jaw faces for regular high-load usage
432-679
Repair kit including replacement rubber jaw faces for regular high-load usage
984
Accessory
Crosshead for Vortex-d & -dV, without sensor
432-474
A complete crosshead assembly for the Vortex-d and Vortex-dV motorised torque test stands.
The assembly comprises:
crosshead with fixing knobs,
movable central carriage on rods including top-plate holder
torque sensor mounting plate - (Note: sensor…
985
Accessory
Dual Handswitches (locking type) for pneumatic grips
Mec205-3
Pneumatic grips are the ideal choice when performing tensile tests on sensitive materials that have a tendency to slip or break at point of clamping.
Mec205-3:
Locking dual handswitches open the jaws of the grip by pushing the lever and remain open after…
986
Accessory
Blank (smooth) jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 80 mm
Mec240k-B80
Blank Jaws (30mm x 80mm) - smooth steel jaw. Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = see datasheet for various spans according to the grip body selected.
Supplied as 0.5 set = 2 jaws (left…
987
Accessory
Float glass plates (10 pieces), 2" x 8" for FINAT 2 Peel Table
PSV15030
A set of 10 pieces of 2" wide x 8" long (51 x 203mm) float-glass plates. Used to mount adhesive specimens on when testing tensile peel strength to the requirements of FINAT and other standards.
For use with the FINAT 2 Assisted Peel Table - part number…
988
Accessory
V-profile jaws for Mec11-50 Scissor Grip, 50 kN, 10 - 48mm diameter
Mec11-50-BV10
V-Jaws (10-48mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods,
tubes).
Supplied as 0.5 set = 2 jaws…
989
Accessory
Rubber coated jaws for Mec154 Heavy-duty Vice Grip, 20kN, 40 x 100 mm
Mec154-BG100
Rubber-faced Jaws (40mm high x 100mm wide) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0 - 28 mm.
For specimens, which may get weakened by pinching at the contact-edge of the grip. (e.g. films, filaments, fibres and…
990
[Page extract]
Power your torque testing
Sophisticated power - easy to use
Looking for an automated torque testing system to improve the accuracy and repeatability of your measurements compared to manual torque testers?
991
[Page extract]
Plastic components and sub-assemblies
The successful design and production of plastic components requires careful attention to be paid to many elements. The choice of plastic material depends on the desired performance characteristics - will parts be under constant load?
992
Sensor
Torque Sensors (ETS)
Torque sensors
The Enhanced Torque Sensors (ETS) range of interchangeable torque sensors are specially adapted for the HelixaPro and VortexPro test systems.
Plug and play for automatic calibration with availability to suit all requirements in capacities…
993
Event
Fundamentals of Compression Testing
How much force is required to register a command when you click your computer mouse?
How much force can a water bottle take before it collapses in its case under a stack?
994
[Page extract]
ASTM D2919
This test method covers data for assessing the durability of adhesive lap-shear joints while stressed in contact with air, air in equilibrium with certain solutions, water, aqueous solutions, or other environments at various temperatures.
995
Case study
90 degree peel test filter paper
Customised engineering example
Floating roller peel jigs are regularly used for testing laminates where the backing sheet is rigid and the facing sheet is flexible (e.g. security cards)
996
[Page extract]
How is the 135° peel test performed?
Specimen preparation
Test specimens are usually strips cut from the sealed edge of a tray or container.
997
[Page extract]
ASTM D953-18
ASTM D953 is a test method that covers the determination of the pin-bearing strength of rigid plastics in either sheet form, molded form, or in reinforced thermoset form.
998
Case study
Diamante pull-off test
Requirement
The customer was a supplier to major UK clothing retailer Marks & Spencer, who stipulate that all fasteners and attachments must be tested to failure.
999
[Page extract]
Equipment for yield point testing
Yield point measurement solutions
Advanced test systems such as the Mecmesin OmniTest and
1000
[Page extract]
BS ISO 3597-2
ISO 3597-2 specifies a method for determining the flexural strength of composite rods of circular cross-section made of roving-reinforced resin.