Search results
801
Accessory
Square Perforated Aluminium Compression Plate, 150 x 150 mm, QC-20 or QC-32 fitting
Mec36L-150-L6x20
MEC36L-150-L6x20
Square Compression Plate in aluminium featuring perforations to allow air release during testing - suitable for foam testing. Holes are 6mm diameter and spaced at 20mm intervals.
Dimensions: 150mm x 150mm
Fitted with QC-20mm or 32mm…
802
Accessory
Charger for digital gauges, UK, 230 V, 3-pin square
304-005
For use with Mecmesin digital force and torque gauges. 230 Volt with 3 square pins. Commonly used in the UK.
The mains adaptor/charger is a constant-current type:
Primary circuit: 230V – 50Hz
Secondary circuit: 100mA constant current at 9V Charger…
803
Accessory
Medium Vice Grip - Single Action, 2 kN, 20 mm opening, QC-20 fitting
Mec240k-S20
MEC 240k-S20 (body only) :
A Medium Single-action Vice Grip allowing one jaw to be manually set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place.
Rated to 2…
804
Accessory
Small Single-action Vice Grip, 200 N, QC-20 fitting
432-264
A general-purpose Single-action Vice Grip.
Ideal for testing low force flat specimens. The open side design facilitates easy loading of thin, non-rigid samples, which are clamped in place.
Fitted with 30 mm x 30 mm flat-faced jaws and rated to 200 N in…
805
Accessory
Large Pneumatic Plane Grips, pyramid-faced jaws, 1 kN, Pair, QC-20 fitting
432-276
A pair of pneumatically-operated, single-action Large Pneumatic Plane Grips with an opening of 0-14 mm.
Each 30mm high x 51mm wide jaw is fitted with a pyramidal surface to secure specimens tightly. The specimen is held between the fixed jaw and the…
806
Accessory
Spring-action Vice Clamp, 200 N, 10-32 UNF
432-381
Spring-action Vice Clamp is fitted with adjustable serrated interlocking jaws to effectively grip specimens for tensile testing up to 200 N.
Ideal for gripping up to 16mm wide strips of film, paper, labels, tape and other thin materials for tensile and…
807
Accessory
U-Form Vice Grip - Double Action, 5 kN, 50 mm opening, QC-20 fitting
Mec240g-S50
MEC 240g-S50 (body only):
A U-form Vice Grip providing free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
The ‘U-Form’ cut into the aluminium…
808
Accessory
Cable Cam Grip (smooth), 1 kN, 10-32 UNF
432-404
Cable Cam Grip - smooth, small
Designed for holding insulated cables and wire. The specimen is secured by the cam, which self-tightens as load is applied and spreads the load evenly.
Smooth cams are preferable for materials where a serrated cam may bite…
809
Accessory
Large Double-action Vice Grip, 5 kN, QC-20 fitting
432-433
The Large Double-action Vice Grip provides free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
It has a Tommy-bar handle on one side for rapid…
810
Accessory
Square Perforated Aluminium Compression Plate, 200 x 200 mm, QC-20 or QC-32 fitting
Mec36L-200-L6x20
MEC36L-200-L6x20
Square Compression Plate in aluminium featuring perforations to allow air release during testing - suitable for foam testing. Holes are 6mm diameter and spaced at 20mm intervals.
Dimensions: 200mm x 200mm.
Fitted with QC-20mm or 32mm…
811
Accessory
Lightweight Lower Chuck, for use on base of Helixa stand
432-509
Lightweight Lower Chuck for Helixa
A pin-chuck fitted with an adaptor for connection to the motor spindle of 'Helixa' motorised test stands.
Max.opening 3.2mm. Supplied with T-bar to allow easy opening and tightening
Used for holding components and…
812
Accessory
Excel macro for calculating Z-value (M&S requirement)
840-215
A basic Excel macro which can present the data obtained during "test-to-failure" tests to check the security of attachments in the report-format requested by Marks & Spencer (M&S).
813
Accessory
Thin Wire Grip with carrier for inset jaws, 2.5 kN, QC-20 fitting
Mec9
MEC9 Thin Wire Grip
Designed to hold wires or cords when tensile testing up to 2.5 kN.
The specimen is initially wrapped around a bollard and then secured by manually clamping between either blank or diamond-coated jaws. The Mec9 is supplied with the…
814
Accessory
Charger for digital gauges, Europe, 230 V, 2-pin round
304-004
For use with Mecmesin digital force and torque gauges. 220 Volt with 2 round pins. Commonly used in Europe, South America and Asia.
The mains adaptor/charger is a constant-current type:
Primary circuit: 230V – 50Hz
Secondary circuit: 100mA constant…
815
Accessory
3-Point Bend Jig, 20 kN, Steel, QC-20 fitting
432-266
A simple 3-point bend jig supplied as standard with a 5mm radius upper anvil (QC 20mm female connection) and two adjustable lower anvils also of 5mm radius.
Lower support beam is fitted with QC 20mm female connection suitable for mounting on single- and…
816
Accessory
Large Circular Bollard Grip, 2 kN, QC-20 fitting
432-271
The Large Circular Bollard Grips is made from steel and is designed for tensile testing up to 2 KN of flexible wire-type materials with a maximum specimen thickness width of 2 mm.
The specimen is wrapped around the bollard and the free end is clamped…
817
Accessory
U-Form Vice Grip - Double Action, 5 kN, 106 mm opening , QC-20 fitting
Mec240g-S100
MEC 240g-S100 (body only):
A U-form Vice Grip providing free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
The ‘U-Form’ cut into the…
818
Accessory
Wedge Grip (large), 5 kN, 5-16 UNC
432-398
The 5 kN Wedge Grip is ideal for tensile testing of flat and rigid materials, including plastics, rubber and light metals.
A spring-loaded lever ensures the serrated jaws (25mm wide x 32mm high) are easy to open for fast securing and release of samples…
819
Accessory
Large Torque Saddle Plate
432-424
Saddle plates provide a more stable base on which to mount awkwardly-shaped samples.
Can be used on the 6 N.m Orbis and 6 N.m…
820
Accessory
Square Perforated Aluminium Compression Plate, 150 x 150 mm, QC-20 or QC-32 fitting
Mec36L-150-L6x20
MEC36L-150-L6x20
Square Compression Plate in aluminium featuring perforations to allow air release during testing - suitable for foam testing. Holes are 6mm diameter and spaced at 20mm intervals.
Dimensions: 150mm x 150mm
Fitted with QC-20mm or 32mm…
821
Accessory
Mounting plate for QC-20 Male Post on 50 kN systems
432-622
Allows QC type C Adapter (20mm Male Post) to be fitted directly to the base of 50 kN test systems.
Used when QC-20 grips and fixtures are in long-term use on 50kN test stand.
Supplied with 6 screws of M6 thread.
822
Accessory
Coefficient of Friction (COF) kit to ISO 15359 for FPT-H1
432-639
Integrated kit for use on the FPT-H1 Friction Tester to enable paper and card coefficient of friction testing to ISO 15359.
Comprises:
- a neoprene-faced sled with magnetic grips
- servo-assisted device for raising and lowering of friction sled
- guide…
823
Accessory
Eccentric Roller Grip - Pyramid (serrated) roller, 5 kN, QC-20 fitting
Mec7-5
MEC7-5
Eccentric Cam Grip fitted with a pyramid-faced serrated 50mm wide roller cam. As a load is applied to a specimen the cam self-tightens , spreading the load evenly.
The lever allows for quick insertion and release of specimen to reduce testing…
824
Accessory
3-Point Bend Jig, 2.5 kN, Aluminium, base plate
432-151
432-151 :- a simple 3-point bend jig supplied as standard with a 5mm radius upper anvil (M6 female thread connection) and two adjustable lower anvils also of 5mm radius. Lower support beam is fitted to a base plate suitable for Mecmesin motorised test…
825
Accessory
V-jaw vice clamp, four jaws on screw-action adjuster, QC-20 fitting
432-678
432-678 is a vice fixture for mounting to the base of a test stand when performing tension and compression tests. It has four jaws, with two jaws being vertically spaced on either side. This provides increased stability by clamping at alternate heights on…