PCB Copper Track 90 Degree Peel

Case study
MB PCB copper peel close up printed circuit board
MB PCB copper peel close up printed circuit board
printed circuit board PCB 90 degree copper track adhesive peel
printed circuit board PCB 90 degree copper track adhesive peel

Solution

  • MultiTest 2.5-i software-controlled foce test system
  • Assisted pull peel table

Benefits

  • Reliable and repeatable test routine
  • Test to international standards
Having an in-house test capability is essential when developing new processes and products. Having the Mecmesin tester at Cambridge Nanotherm has allowed us to reduce test cycles significantly. The software package also gives us the ability to analyse the subtle differences in adhesion mechanisms and also gives us the ability to produce detailed reports for our suppliers and customers.

Steven Curtis, Chief Engineering Officer
Cambridge Nanotherm Ltd

Requirement

Cambridge Nanotherm Ltd produce a unique, technologically-advanced substrate for the thermal management of electronic components. Their patented Nanotherm™ technology creates a nano-ceramic dielectric layer on the surface of an aluminium substrate onto which a circuit layer is formed. Metal-backed printed circuit board (MBPCB) products utilise this process to provide an industry-leading low thermal resistance and the ability to significantly reduce component operating temperature. The conductive copper bonded to the ceramic layer is able to be patterned with standard techniques, allowing customer designs to be readily manufactured.

The adhesion of the tracks to the substrate is a key property of the material and this peel strength is tested according to Institute of Printed Circuits IPC-TM-650 test standards. In order to continue to pass these industry tests and further enhance the capability to develop high quality, innovative products, the company required a solution to test in-house, to replace the existing out-sourced testing.

Solution

Mecmesin supplied a single column computer-controlled test stand complete with an assisted-pull peel table to accurately control the constant 90 degree peel angle. Having previously performed the tests with other equipment, the company were able to calibrate existing data against that acquired from demonstrations, to verify accuracy and evaluate the full process for suitability. Lightweight pinch grips hold the thin sample securely across its full width, but avoid breakage, while the clevis chain link, in conjunction with the horizontally driven table, ensures the crosshead’s vertical travel resolves to a 90 degree peel without jarring or adding noise to the measurement.

The peel is performed at a constant 2”/min and the salient force value is the calculated average minimum. Emperor™ software controls the whole process and the programming flexibility will allow the company to develop further tests, if required, to ensure quality assurance for these cutting-edge technologies. This in-house capability also enables quicker optimisation within design cycles and eliminates the costs incurred for external testing services.

Test equipment

  • MultiTest 2.5-i force test system
  • 10 N & 25 N intelligent loadcells
  • 90 degree assisted peel table
  • Pinch grip and clevis chain link
솔루션, 가격 및 지원에 대해서는 해당 국가의 Mecmesin 담당자에게 문의하십시오.
 

이 시스템에 대해 궁금한 점이 있습니까? 연락하여 기술 영업 엔지니어에게 문의하십시오.

전문가와 대화