Tension

Description

There are in essence two types of tensile grips:

  1. 'Self-tightening’ whereby the clamping force to hold the specimen increases as tensile load is applied. This is achieved by the action of wedges, levers, eccentric cams /rollers and pincer-scissors, which all move to tighten their hold as tensile load is applied during the test thereby reducing the risk of slippage.
  2. Side-action’ whereby the clamping force to hold the specimen is independent of the tensile load applied. The clamping force is achieved by parallel jaw faces which are set to a certain position by a screw-action or via pre-loaded springs. As the specimen decreases in thickness when it is stretched during the test there is a commensurate reduction in clamping force exerted by the ‘fixed position’ parallel jaw faces potentially increasing the risk of slippage. Such grips are ‘screw-action’ Vice Grips, Pinch Grips, Toggle Grips, Claw and Chuck Grips.
Talk to an expert about force and torque testing accessories, grips and fixtures, full catalogue online on pc, tablet and mobile, by Mecmesin
 

Speak to an expert

Got a question about this accessory? Get in touch and speak to one of our Technical Sales Engineers now...

 

Tension accessories