Category
Part Number
432-270
Description
The Small Circular Bollard Grips is made from aluminium and is designed for tensile testing up to 100 N of delicate, flexible specimens such as fine threads, wires and yarns, which may break easily when clamped.
The specimen is wrapped around the bollard and the free end is clamped tightly in place using a pair of friction washers and a thumbscrew. The bollard has a single 5 mm wide smooth groove to align the specimen centrally and has a diameter of 25 mm around which it can be wound. This minimises the chance of slippage within the grip, or of premature failure of the sample occurring due to stress concentrating at one point.
Fitted with a QC-20mm female hole for connection to the base of a test stand or loadcell.
The specimen is wrapped around the bollard and the free end is clamped tightly in place using a pair of friction washers and a thumbscrew. The bollard has a single 5 mm wide smooth groove to align the specimen centrally and has a diameter of 25 mm around which it can be wound. This minimises the chance of slippage within the grip, or of premature failure of the sample occurring due to stress concentrating at one point.
Fitted with a QC-20mm female hole for connection to the base of a test stand or loadcell.
Images
Related Parts
Load Rating
100 N
( 22 lbf )
Fittings
Quick Change |
---|
20 mm |
Weight
210 g
Speak to an expert
Got a question about this accessory? Get in touch and speak to one of our Technical Sales Engineers now...
Similar accessories
432-363
Filament Grip, 250 N, 10-32 UNF
Category
Load Rating
250 N
Thread 1 - Gender
M&F
Thread 1 - Size
10-32 UNF
432-271
Large Circular Bollard Grip, 2 kN, QC-20 fitting
Category
Quick Change
20 mm
Thread 1 - Gender
F
Mec9
Thin Wire Grip with carrier for inset jaws, 2.5 kN, QC-20 fitting
Category
Load Rating
2.5 kN
Quick Change
20 mm
PDV8041
Webbing Bollard Grips
Category
Load Rating
2.5 kN
Thread 1 - Gender
M&F
Thread 1 - Size
5-16 UNC