Search results
2376
[Page extract]
BS EN ISO 6259-1
BS EN ISO 6259-1 is a test method for determining the tensile properties of thermoplastic pipes.
2377
Case study
Lớp phủ Plasma hiệu suất cao
Yêu cầu Alphatek Hyperformance Coatings Ltd. là một công ty sơn phủ ứng dụng các lớp phủ chống mài mòn, ăn mòn, nhiệt hoặc điện trở, cung cấp cho nhiều ngành công nghiệp khác nhau.
2378
[Page extract]
ASTM C907
This test method covers a laboratory procedure for determining the tensile adhesive strength of a preformed tape sealant. The type of failure can be determined, and the degree of cohesive/adhesive failure can be estimated.
2379
[Page extract]
ASTM C972
Tape sealants are tacky, deformable solids used under compression between two or more surfaces of similar or dissimilar materials in a variety of sealing applications.
2380
[Page extract]
BS 1726-1
Provides guidance on methods of specifying and tolerancing hot coiled compression springs, and cold coiled springs that fall outside the size range limits specified in BS EN 15800.
2381
[Page extract]
ISO 1924-1
Applies, within the limitations of the instruments used, to all papers and boards with the exception of corrugated board, but may be applied to the components of such board. Specifies the method which causes failure of the piece in a mean time of 20 s.
2382
[Page extract]
BS EN 12242
The BS EN 12242 test method is used to determine the peel strength of a touch and close (also known as “hook and loop”) fastener through a 180° peel test that is able to determine average peel and the peel strength characteristics of the product for a g
2383
[Page extract]
BS EN 1263-1
Safety nets, Restraint systems (protective), Construction equipment, Safety devices, Building sites, Occupational safety, Performance, Man-made fibres, Polyamide fibres, Polyolefin fibres, Ropes, Performance testing, Mechanical testing, Tensile testing,
2384
[Page extract]
Support
Our sales, engineering and technical support teams are committed to providing the highest level of customer service. Mecmesin provide application and technical support for all of our products.
2385
[Page extract]
ISO 1924-3
Specifies a method for measuring the tensile strength, strain at break, tensile energy absorption and tensile stiffness, using a testing machine operating with a constant rate of elongation (100 mm/min).
2386
[Page extract]
ISO 4587
Specifies a method for determining the tensile lap-shear strength of rigid-to-rigid bonded assemblies using a standard specimen under specified conditions of preparation and testing. This test procedure does not provide design information.
2387
[Page extract]
BS EN ISO 1806
This standard specifies a method of determining the mesh breaking force of netting for fishing.
2388
[Page extract]
ISO 11607-1
Specifies the requirements and test methods for materials, preformed sterile barrier systems, sterile barrier systems and packaging systems that are intended to maintain sterility of terminally sterilized medical devices until the point of use.
2389
[Page extract]
ASTM D6324-11
ASTM D6324 covers the minimum requirements for individually packaged male condoms made from polyurethane. This specification also describes the minimum inspection and quality levels that shall be utilized in referee tests.
2390
[Page extract]
ISO 11897
ISO 11897 specifies a method for the determination, under given conditions, of the resistance to tear propagation on an edge fold of sacks made from thermoplastic flexible film.
2391
[Page extract]
ISO 1926
ISO 1926 specifies a method of determining the behaviour of rigid cellular plastics materials when they are subjected to a tensile stress.
2392
[Page extract]
ISO 527-4
ISO 527-4 determines the tensile properties of isotropic and orthotropic fibre reinforced plastic composite sheeting and film including the tensile strength and modulus of elasticity, strain, elongation and the tensile energy to break (TEB).
2394
[Page extract]
ISO 8067
ISO 8067 specifies two methods for the determination of the tear strength of flexible cellular polymeric materials:
Method A, using a trouser test piece
Method B, using an angle test piece without a nick
2395
[Page extract]
TAPPI T 810
This method describes a procedure for measuring the bursting strength of single wall and double wall corrugated board within the range of 690 kPa (100psi) to 4825 kPa (700 psi) employing an instrument which uses a disk shaped, molded diaphragm.
2396
[Page extract]
Education
Mecmesin testing solutions for education provide an affordable and ideal introduction to all forms of testing on design, materials science, engineering and even physiology courses.
2397
Case study
Máy kiểm tra mô-men xoắn cho các cửa sổ và điều khiển cửa sổ trời
Yêu cầu Khách hàng yêu cầu một hệ thống di động có thể nhanh chóng và dễ dàng cho phép anh ta kiểm tra mô-men xoắn cần thiết để đóng và mở cửa sổ trong ô tô. Cần ghi lại mômen xoắn lớn nhất cần thiết để bắt đầu quay cơ cấu cửa sổ.
2398
Case study
Ống tiêm chống gãy kim khi chịu tải trọng uốn
Yêu cầu Dong-A ST, có trụ sở tại Hàn Quốc, đang trở thành một công ty toàn cầu trong lĩnh vực dược phẩm có đạo đức. Nó cũng có một bộ phận kinh doanh thiết bị y tế và bộ phận Nghiên cứu và Phát triển nhiều mặt.
2399
[Page extract]
Precision
HelixaPro and HelixaPro Touch are designed for challenging applications where torque forces may be very small and accuracy is the priority, from 1 mN.m up to 6 N.m.
2400
Case study
Lực bẻ gãy đầu phun nắp nhôm
Yêu cầu Một nhà cung cấp thiết bị và linh kiện khí y tế lớn trên toàn cầu đã yêu cầu các bài kiểm tra kiểm soát chất lượng để đánh giá một phần của sản phẩm mới.