Search results
326
Product
Máy kiểm tra đa năng
OmniTest 5/7.5
820-005
Dòng máy thử nghiệm đa năng để bàn (UTM) mới của chúng tôi được thiết kế để thử nghiệm độ bền kéo và độ nén của vật liệu, sản phẩm và linh kiện. Các hệ thống kiểm tra phổ quát linh hoạt này được điều khiển bởi phần mềm kiểm tra VectorPro™ mạnh mẽ và trực…
327
[Page extract]
ASTM D4917-90
1.1 This test method describes a horizontal plane procedure for the determination of the coefficient of static and kinetic friction of paper measured when sliding against itself.
328
Sensor
VFTI - Force and Torque Sensors
Force and Torque sensors
The VFTI, AFTI, VFG and AFG are versatile force and torque indicators designed for use with the Mecmesin range of 'Smart' tension and compression loadcells and 'Smart' static and rotary torque sensors.
Readings are displayed as…
329
Case study
Medical suture device calibration system
Requirement
A number of devices which 'crimp' a curved needle to a fine medical thread needed to be tested. The crimp force was applied horizontally pulling a lever on the device.
330
[Page extract]
ASTM F88/F88M
ASTM F88 test method covers the measurement of the strength of seals in flexible barrier materials. Seal strength is the tensile strength of the seal at ambient temperature.
331
Case study
PVC pipe valve actuation torque
Requirement
Nawaplastic industries (Saraburi) Co. Ltd. manufactures and distributes a wide range of PVC pipes, components and fittings and associated products and services in plumbing, drainage and agricultural applications.
332
[Page extract]
ASTM E1012-12e1
It has been shown that bending stresses that inadvertently occur due to misalignment between the applied force and the specimen axes during the application of tensile and compressive forces can affect the test results.
333
Product
Pneumatic Bursting Strength Tester
TruBurst
905-511
Pneumatic Bursting Strength Tester with TestWise™ software and a range of bursting strength and fatigue tests suitable for knitted textiles, medical textiles, non-wovens, paper and plastics.
Developed by our sister company, James Heal.
334
Case study
Diamante pull-off test
Requirement
The customer was a supplier to major UK clothing retailer Marks & Spencer, who stipulate that all fasteners and attachments must be tested to failure.
335
[Page extract]
Introduction to tangent modulus
In materials science and engineering, understanding how materials respond to stress is essential for ensuring safety, performance, and longevity. One key parameter used to characterise this behaviour is the tangent modulus.
336
Accessory
Large Double-action Vice Grip, 5 kN, QC-20 fitting
432-433
The Large Double-action Vice Grip provides free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
It has a Tommy-bar handle on one side for rapid…
337
Case study
Hygienic disposal bin closure testing
Customised engineering example
A manufacturer of hygienic disposal bins came to us with a nappy (diaper) disposal unit fitted with a rotary intake mechanism.
338
[Page extract]
Digital force gauges
Mecmesin's digital force gauges deliver outstanding accuracy and affordability.
339
Accessory
Wedge Grip (small), 500 N, 10-32 UNF
432-385
The small, lightweight Wedge Grip is ideal for tensile testing below 500 N.
A spring-loaded lever ensures the serrated jaws (16mm wide x 20mm high) are easy to open for fast securing and release of samples. As load is applied, the self-tightening action…
340
Accessory
Container Holder, 100 N, 10-190 mm
432-411
A versatile gripping fixture to hold containers when conducting low-force pull-off tests on closures and other fixings (eg. flip-cap lids).
4-pegs hold the container on an adjustable lead-screw and the knob secures the container tightly in place.…
341
Accessory
Wire Grip, 500 N, 10-32 UNF
432-397
The Wire Grip is designed for tensile testing up to 500 N of flexible thin wires, which may break easily when clamped.
The specimen is wrapped around a grooved 19 mm diameter bollard and the free end is clamped tightly in place using a pair of friction…
342
Accessory
Filament Grip, 250 N, 10-32 UNF
432-363
The Filament Grip is designed for tensile testing up to 250 N of delicate, flexible specimens such as threads and yarns, which may break easily when clamped.
The specimen is wrapped around a grooved 13mm diameter bollard and the free end is clamped…
343
Accessory
Popper Cam Base, 1 kN, 10-32 UNF
432-179
The Popper Cam Base is used to secure the fabric when testing the strength of press studs ('poppers'), particularly on children’s clothing.
It is secured to the base of the test stand and the popper is fed through the retaining hole and positioned over…
345
[Page extract]
Types of flexure tests
Different flexure testing setups are chosen based on the nature of the material, the required precision, and the industry standards being followed.
346
Event
China (Shanghai) International Metrology Measurement Technology and Equipment Exhibition 2025
Mecmesin – Will participate in the upcoming The 7th China (Shanghai) International Metrology Measurement Technology and Equipment Exhibition 2025
347
[Page extract]
Key methods for compressive strength testing
Several methods are used to determine the compressive strength of materials, and the appropriate test depends on the material and the specific industry requirements.