Search results
76
Product
Torque wrench calibrator
TWC
875-001
The TWC Torque Wrench Calibrator is is a simple and cost-effective solution for checking the settings on standard 'beam', 'click' and 'break-over' wrenches.
Manually operated and measuring both clockwise and counter-clockwise torque up to 1000 N.m with…
77
Case study
Testing fluid control valves and seals
Requirement
A typical gas lift system for oil and gas production requires a set of valves to operate along the production tubing down the drilling well.
78
Case study
Alumina sphere crush test
Requirement
G.T. Michelli Co. serves a wide variety of industries and markets from petrochemical manufacturing to biomedical facilities.
79
Case study
Ice cream packaging closure and integrity testing
Requirement
Low temperature conditions and food hygiene standards add challenges to the design and materials specification of this type of thermoformed plastic packaging.
80
[Page extract]
Force systems
Do you need a level of accuracy and repeatability which just cannot be achieved by manual testers?
81
Event
Medical Devices – Syringe & Needle Testing Fundamentals
Vial sealing is a critical step in the process of ‘fill and finish’ operations for vaccines and medications, as it defines the seal quality of the final product, ensuring sterility and preventing leakage.
82
Event
Compressive Crush Force Testing
This webinar will focus on identifying and troubleshooting variables that impact compressive force testing, setting up repeatable compression force tests and establishing consistent testing standards for your products.
83
Event
Medical Devices – Syringe & Needle Testing Fundamentals
Vial sealing is a critical step in the process of ‘fill and finish’ operations for vaccines and medications, as it defines the seal quality of the final product, ensuring sterility and preventing leakage.
84
Software
Emperor Force software
Emperor™ Force software
Easy-to-use software with almost limitless freedom to design and customise tension and compression tests to suit your needs. Developed by Mecmesin in close collaboration with our customers, Emperor™ is now trusted by over 5,000…
85
Page
Calibration
Mecmesin is committed to providing the highest level of after-sales service to our customers worldwide. To keep your force and torque testing equipment in top-class condition you can always rely on our team of distributors and regional offices.
86
Case study
Fishing net tensile strength testing to ISO1805 and ISO1806
Requirement
Fishing nets are one of the key tools in commercial fishing and there are many types of active and passive netting gear available.
87
Case study
Hot air balloon cloth tensile strength and tear-resistance testing
Requirement
Ultramagic is the second largest hot air balloon manufacturer in the world.
For obvious safety reasons, the material used must conform to strict standards applicable to the aeronautical industry.
88
Case study
Force testing of watch components and attachments
Requirement
The time displayed on our mobile phones and other digital devices will always be more accurate than the time displayed on even the most skilfully engineered mechanical watch—so why does the watch industry continue to thrive?
89
Guide
OmniTest™ 5.0 Operation and Installation Manual
Scope
This reference manual covers the operation of an OmniTest-5.0 force test stand, intended for use with Mecmesin enhanced load sensors, extensometer devices and other Mecmesin accessories.
90
Case study
Nursery toy product puncture resistance safety testing
Requirement
Wonderstar was established in 2010 in Thailand, with a mission of providing quality and well-designed baby products for families.
91
Case study
Toothbrush tester for bristle stiffness and pull-out resistance
Requirement
Toothbrushes are just as important as toothpaste for ensuring effective oral hygiene. As consumers we often underestimate the essential role they play in removing food particles, getting rid of plaque and stimulating the gums.
92
Accessory
Force Gauge Gripping Cradle, 2.5 kN
432-388
Allows force gauges to be used as a rigid hand-held instrument (mounting screws supplied).
The dual-handle cradle allows the comfortable application by hand of push/pull loads.
For use with a BFG or AFG digital force gauge.
Commonly used for manual-…
93
[Page extract]
Universal testing machines
Our universal testing machines (UTM) are capable of performing a range of tests, including tensile and compression tests, following international and industry-specific standards.
94
Case study
Electrical connector insertion and withdrawal forces
Customised engineering example
Push-fit electrical connectors with hole or dimple detents (also known as 'spade terminals') must offer a firm but practical fit.
95
Case study
Plastic film tension test
Requirement
The customer uses a double layer plastic film for packaging film for packaging of pet food and confectionary.
96
Case study
Measuring shear strength of loose building materials
Customised engineering example
The shear strength of compacted materials (e.g. soil and sand) can be awkward to test.
97
Case study
Flip-cap force test
Requirement
A repeatable test system to check the opening force of flip cap lids, accommodating 3 different diameter caps with minimal fixture changeover.
98
Product
Universal testing machine
OmniTest 10/25/50
820-110
Our new range of bench-top universal testing machines (UTMs), available in 10 kN, 25 kN, and 50 kN models, is designed for precise tensile and compression testing of materials, products, and components. Driven by the intuitive VectorPro™ software, these…
99
Product
Precision automated torque tester
HelixaPro
876-450
The HelixaPro is a precision torque tester controlled by VectorPro software running on your computer.
100
Case study
Screw retention force of building materials
Requirement
A leading manufacturer and distributor of metal building roofing systems for the construction industry wanted to ascertain the pull out force of screws fixed to building materials.