Search results
76
Accessory
Puncture Test Fixture to EN ISO 14477, 500N, QC-20 fitting
MecS511
This EN ISO 14477 Puncture Test Fixture is for testing resistance strength in flexible packaging materials.
The specimen is clamped in the lower specimen holder, which is connected to the base plate of the test stand via a QC-20 female hole.
An upper '…
77
Accessory
Large Circular Bollard Grip, 2 kN, QC-20 fitting
432-271
The Large Circular Bollard Grips is made from steel and is designed for tensile testing up to 2 KN of flexible wire-type materials with a maximum specimen thickness width of 2 mm.
The specimen is wrapped around the bollard and the free end is clamped…
78
Accessory
Small Circular Bollard Grip, 100 N, QC-20 fitting
432-270
The Small Circular Bollard Grips is made from aluminium and is designed for tensile testing up to 100 N of delicate, flexible specimens such as fine threads, wires and yarns, which may break easily when clamped.
The specimen is wrapped around the…
79
Accessory
Eccentric Roller Grip - Pyramid (serrated) roller, 5 kN, QC-20 fitting
Mec7-5
MEC7-5
Eccentric Cam Grip fitted with a pyramid-faced serrated 50mm wide roller cam. As a load is applied to a specimen the cam self-tightens , spreading the load evenly.
The lever allows for quick insertion and release of specimen to reduce testing…
80
Accessory
Upper Torque Fixing Table for Vortex stands
432-321
Upper Torque Fixing Table.
Offers highly versatile holding of specimens when torque testing. Fully adjustable between 10 - 78mm opening to accommodate a variety of forms.
Four rubber-coated, threaded pegs are supplied as standard which screw into…
81
Accessory
Eccentric Roller Grip - Pyramid (serrated) roller, 10 kN, QC-20 fitting
Mec7-10
MEC7-10 Eccentric Cam Grip
Fitted with a pyramid-faced serrated 60mm wide roller cam. As a load is applied to a specimen the cam self-tightens , spreading the load evenly.
The lever allows for quick insertion and release of specimen to reduce testing…
82
Accessory
Puncture Test Fixture to EN ISO 14477, 500N, QC-20 fitting
MecS511
This EN ISO 14477 Puncture Test Fixture is for testing resistance strength in flexible packaging materials.
The specimen is clamped in the lower specimen holder, which is connected to the base plate of the test stand via a QC-20 female hole.
An upper '…
83
Case study
Test su siringa secondo ISO 11040-4 Allegato F: Test di penetrazione e trascinamento dell'ago
Esplorate questa guida completa sul test delle siringhe secondo la norma ISO 11040-4 Allegato F. Scoprite il processo passo dopo passo del test di penetrazione e trascinamento dell'ago, l'attrezzatura necessaria e le migliori pratiche per ottenere…
84
[Page extract]
ASTM F2193-02
These specifications and test methods provide standard specifications that specify material, labeling, and handling requirements for components used in surgical fixation of the spinal skeletal system such as metallic spinal screws, spinal plates, and sp
85
[Page extract]
Force Testing
Force testing is a way of determining how an object will react when it is subjected to tensile or compressive loads - either during its normal operation or when being pulled/pushed unti
86
Product
Tester automatico di attrito, pelatura e strappo
FPT-H1
817-001
FPT-H1-i è un sistema di test completo, controllato da software in esecuzione su PC. Accurato e facile da usare, è specificamente progettato per testare il coefficiente di attrito, la resistenza alla lacerazione e alla lacerazione di una varietà di…
87
Case study
PET screen protector release liner peel testing
Requirement
Manufacturers of products which include a critical screen surface, generally apply a plastic film as protection during assembly, packing and transit to the end customer.
88
[Page extract]
The concentric ring method
The most widely used approach to equibiaxial flexure compression testing is the concentric ring method. A circular specimen is supported on an outer ring and loaded through a smaller, concentric inner ring.
89
Guide
OmniTest™ 5.0 Operation and Installation Manual
Scope
This reference manual covers the operation of an OmniTest-5.0 force test stand, intended for use with Mecmesin enhanced load sensors, extensometer devices and other Mecmesin accessories.
90
[Page extract]
Procedure for tensile testing
While the specifics vary depending on material type and applicable standards, the general procedure includes:
91
[Page extract]
Performing a five-point bend test
Specimen preparation
Cut specimens to the standardised dimensions specified in ASTM D2718.
Ensure surfaces are smooth and free from defects that could affect results.<
92
[Page extract]
Test method and procedure
Preparing specimens
Material selection - Use representative samples from the batch being tested.
Cutting - Prepare specimens to the exact dimensions specified in
93
[Page extract]
Tools (calibration related)
To maintain consistent performance and accuracy, tools must be checked regularly.
94
Case study
Test di coppia di quadranti su occhiali regolabili
Requisiti Adlens produce lenti adattive utilizzate all'interno di occhiali distribuiti in tutto il mondo. Le lenti cambiano potenza al giro del quadrante situato sul lato dello spettacolo.
95
Case study
Studi di calibrazione della resistenza precoce Shotcrete
Requisiti Multicrete Systems Inc. è specializzata in soluzioni di progetto per l'industria mineraria e delle gallerie.
96
Case study
Test di coppia di controllo del dosaggio per inalatori dosati, autoiniettori e penne per insulina
Requisiti Inutile dire che la corretta somministrazione e la corretta dose di medicina sono fondamentali per garantire le migliori possibilità di recupero e benessere del paziente.
97
Case study
Luer and small-bore connector torque testing
Requirement
International standards relevant to small-bore connectors for liquids and gasses in healthcare applications focus on their ease of use and resistance to leakage or mishandling.
98
Case study
Rilascio Test di coppia di tappi per champagne e spumanti
Requisiti La forza di estrazione del sughero dallo Champagne e dai vini spumanti è un parametro fondamentale per il controllo della qualità da misurare.
99
[Page extract]
Universal testing machines
Our universal testing machines (UTM) are capable of performing a range of tests, including tensile and compression tests, following international and industry-specific standards.
100
[Page extract]
Test di forza
La prova di forza è un modo per determinare la reazione di un oggetto quando viene sottoposto a carichi di trazione o compressione, sia durante il suo normale funzionamento sia quando v