Search results
501
Accessory
Webbing Grip, 2 kN, QC-20 fitting
432-269
Webbing Grips are designed for tensile testing of high strength belts and tapes below 2 kN.
The sample is wound around the knurled roller and then around the smooth roller. As load is applied, the smooth roller moves in the slot to secure tightly…
502
Accessory
V-jaw vice clamp, three jaws with quick release lever, 500N, QC-20 fitting
432-677
432-677 is a vice fixture for mounting to the base of a test stand when performing tension and compression tests. It has three jaws, two vertically spaced on one side, clamping with a single jaw at mid-height. The double jaw is precisely adjusted with a…
503
Accessory
Cable Cam Grip (smooth), 1 kN, 10-32 UNF
432-404
Cable Cam Grip - smooth, small
Designed for holding insulated cables and wire. The specimen is secured by the cam, which self-tightens as load is applied and spreads the load evenly.
Smooth cams are preferable for materials where a serrated cam may bite…
504
Accessory
Eccentric Roller Grip - Pyramid (serrated) roller, 10 kN, QC-20 fitting
Mec7-10
MEC7-10 Eccentric Cam Grip
Fitted with a pyramid-faced serrated 60mm wide roller cam. As a load is applied to a specimen the cam self-tightens , spreading the load evenly.
The lever allows for quick insertion and release of specimen to reduce testing…
505
Accessory
Eccentric Roller Grip - Pyramid (serrated) roller, 10 kN, QC-20 fitting
Mec7-10
MEC7-10 Eccentric Cam Grip
Fitted with a pyramid-faced serrated 60mm wide roller cam. As a load is applied to a specimen the cam self-tightens , spreading the load evenly.
The lever allows for quick insertion and release of specimen to reduce testing…
506
Accessory
Wedge Grip (large), 5 kN, 5-16 UNC
432-398
The 5 kN Wedge Grip is ideal for tensile testing of flat and rigid materials, including plastics, rubber and light metals.
A spring-loaded lever ensures the serrated jaws (25mm wide x 32mm high) are easy to open for fast securing and release of samples…
507
Accessory
Eccentric Roller Grip - pyramid (serrated) roller, 1 kN, QC-20 fitting
Mec7-1
MEC7-1 Eccentric Cam Grip
Fitted with a pyramid-faced serrated 50mm wide roller cam. As a load is applied to a specimen the cam self-tightens , spreading the load evenly.
The lever allows for quick insertion and release of specimen to reduce testing…
508
Accessory
Eccentric Roller Grip - pyramid (serrated) roller, 1 kN, QC-20 fitting
Mec7-1
MEC7-1 Eccentric Cam Grip
Fitted with a pyramid-faced serrated 50mm wide roller cam. As a load is applied to a specimen the cam self-tightens , spreading the load evenly.
The lever allows for quick insertion and release of specimen to reduce testing…
509
Software
VectorPro torque testing software
VectorPro® software
VectorPro is an advanced torque testing software package developed to perform torque testing on components and products. Capture measurement data graphically and share customised test reports quickly.
Simply choose an ETS loadcell and…
510
[Page extract]
What is a three-point bend test?
A three-point bend test is a widely used method for determining the flexural properties of materials. It involves applying a load at the midpoint of a specimen supported at two points, creating a bending force.
511
Case study
Essai de traction sur film de polyéthylène
Exigence
Eurofilm Mantzaris A.E. est l'un des principaux producteurs de films de polyéthylène utilisés pour l'emballage et les applications agricoles.
512
[Page extract]
Standard methods and procedures
T-peel testing is governed by recognised standards to ensure consistency and repeatability of results. The most common are:
513
Event
VectorPro Software - The ultimate platform for force & materials testing
VectorPro Software: The ultimate platform for force & materials testing
Presenters: Carl Bramley / Moses Da Rocha
514
[Page extract]
Step-by-step guide to conducting the ring crush test
Prepare the sample
Cut samples to the required size specified by the relevant standard, typically corresponding to a circumference of 152 mm. Condition the samples at the specified temperature and humidity.
515
Event
Tensile Testing: Extension, Elongation, Force & Failure
The primary objective for measuring and analyzing the the tensile force value of a product is to accurately determine one or more of these factors:
516
Case study
Résistance de rupture du rouge à lèvres
Exigence
Le rouge à lèvres occupe la première place dans la hiérarchie du maquillage avec sa capacité à transformer complètement l'apparence sans l'aide d'un autre produit de beauté.
517
Event
Chinaplas 2025
Mecmesin - Will participate in the upcoming The 37th International Exhibition on Plastics and Rubber Industries (Chinaplas)
518
Product
Couplemètre automatisé de précision
Helixa-i
876-501
Helixa-i est un couplemètre de précision contrôlé par un logiciel fonctionnant sur un PC. Conçu pour les applications de couple de précision où les forces de couple peuvent être très faibles et la précision prioritaire.
Avec une large gamme de…
519
Case study
Essais de résistance à la traction et de résistance à la déchirure sur toile de ballon à air chaud
Exigence
Ultra Magic est le deuxième fabricant mondial de montgolfières.
Pour des raisons évidentes de sécurité, le matériau utilisé doit être conforme à des normes strictes applicables à l'industrie aéronautique.
520
Case study
Synthetic sports surface tuft binding
Customised engineering example
Test method standard BS ISO 4919 applies to the tuft withdrawal force of carpets.
521
Case study
Cardboard beverage bottle carrier unfolding
Customised engineering example
A manufacturer of fully-enclosed cartons wanted to quality test the fold-out force for a variety of their designs, used mainly to package drinks bottles and cans.
522
Case study
Seed bottle closure torque testing
Requirement
The Royal Botanic Gardens, Kew, have undertaken an international conservation initiative to preserve seed specimens of over 24,000 plant species, protecting them from extinction at the Millennium Seed Bank at Wakehurst Place, West
523
Case study
Pump dispenser bottle operation
Customised engineering example
As a method to dispense liquids and sprays propellants, such as pressurised gas, are avoided for many reasons. Dispensers with manual spring-loaded pumps are often used in their place.
524
Case study
Bulk liquid carrier closures
Customised engineering example
Our client manufactures liquid bulk carriers fitted with two-part plastic valve closures. The collar is welded to a plastic bag, and the valve closure is fixed onto it by a compression joint.
525
[Page extract]
The 3-Point Bend test goes to Summer School
Both Dr. Cote and Grubbs agree that one of the highlights of their year is the Materials Science summer course for high school students, where they had students design their own candy composites.