Search results
1476
Accessory
Adapter, 5 kN, 5-16 UNC to M10, M to M
432-333
Male-to-male Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1477
Accessory
standard T-slot fixture table
432-243
This standard fixture table is used for easy configuration and alignment of test fixtures. Fits to a T-slot anvil.
1478
Accessory
Large Single-action Vice Grip, wave-form, 2 kN, QC-20 fitting
432-267-V02
A Large Single-action Vice Grip featuring one fixed jaw and one jaw as freely adjustable to mechanically clamp the specimen in place.
Rated to 2 kN in tension with wave-form jaws of 78mm wide x 28mm high having an opening of 0 - 6.5 mm. Provides…
1479
Accessory
Self-levelling Compression Plate Steel - 156 mm, 25 kN, QC-20 fitting
MecS223k-156
MecS223k - 156mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates.. ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel…
1480
Accessory
‘T’ slot Base Plate
432-294
‘T’ slot base plate (replaces the standard base plate on single-column motorised test stands).
For use with specialist fixtures such as 1kN 3-point Bend Jig (432-294)
Includes ‘T’ bolt fittings.
1481
Accessory
Cone Point - 12 mm diameter, 5 kN, 5-16 UNC
432-359
A Cone Point probe of Ø 12.7 mm with angle of 60°.
For compression testing of various components or materials up to 5 kN.
Typically used where compressive force needs to be applied at a point or for penetration into a material over a short distance.…
1482
Accessory
Compression Plate, Vented by Holes & Cone, 50 mm, 5-16 UNC
432-348
Vented compression plates are ideal for top-load/crush testing of containers such as PET bottles.
Holes in the plate allow the passage of air to ensure that air inside the bottle is not compressed thereby falsifying the true measurement of the top-load…
1483
Case study
Lực bẻ gãy đầu phun nắp nhôm
Yêu cầu Một nhà cung cấp thiết bị và linh kiện khí y tế lớn trên toàn cầu đã yêu cầu các bài kiểm tra kiểm soát chất lượng để đánh giá một phần của sản phẩm mới.
1484
Case study
Lực tác động của màn hình cảm ứng
Yêu cầu Công ty H Hàn Quốc (nay là JNTC), có trụ sở tại Hàn Quốc, là nhà sản xuất màn hình cảm ứng được sử dụng cho các ứng dụng di động, điều hướng và trình phát phương tiện di động.
1485
Case study
Kiểm tra độ căng màng nhựa
Yêu cầu Khách hàng sử dụng màng nhựa hai lớp làm màng bao bì để đóng gói thức ăn cho vật nuôi và bánh kẹo.
1486
Case study
Đo đặc tính lò xo bơm nhiên liệu động cơ
Yêu cầu Một trong những nhà sản xuất phụ tùng ô tô lớn nhất ở Cộng hòa Séc, một phần của tập đoàn lớn, đã yêu cầu một số bộ phận thành phần của nó được thử nghiệm dưới tải trọng cao.
1487
Case study
Thử nghiệm kéo và cắt PCB
Yêu cầu Một nhà sản xuất bảng mạch in muốn thực hiện cả thử nghiệm kéo và cắt đối với các mối hàn gắn trên bề mặt theo tiêu chuẩn IEC 62137-1-1 và -2.
1488
Case study
Bóc thử chứng minh thư
Yêu cầu Khách hàng sản xuất chứng minh nhân dân có nắp ép. Khách hàng muốn biết rằng chất kết dính được sử dụng để kết dính các tấm và thẻ với nhau đủ mạnh để chịu được tốc độ sử dụng hàng ngày cao.
1489
Case study
Đồ đạc và dây buộc công nghiệp
Yêu cầu SFS intec là nhà cung cấp toàn cầu các linh kiện chính xác, ốc vít đặc biệt và các yếu tố buộc cơ khí, với mối quan hệ khách hàng lâu dài, trong các ngành công nghiệp hàng không vũ trụ, ô tô và xây dựng.
1490
Case study
Kiểm tra lô kim phun sinh thiết về độ bền lò xo kích hoạt
Yêu cầu Bard Limited (một bộ phận của CR Bard Inc. tại Vương quốc Anh) cung cấp dịch vụ súng kim tiêm sinh thiết Bard® Magnum® cho khách hàng trên khắp thế giới.
1491
[Page extract]
Comparing FCT with CMT
The flat crush test measures the compressive strength of the fluted structure in finished board, taking into account liners and adhesives.
1492
[Page extract]
Transition from Emperor software to VectorPro
Mecmesin's Emperor software based products, including the MultiTest-i/xt, Helixa-i/xt, and Vortex-i/xt, are no longer available to order from 31 December 2023.
1493
[Page extract]
Understanding peel resistance
Peel resistance is the force required to separate two bonded surfaces through a peeling motion. This force is measured using a tensile test system equipped with a peel fixture.
1494
[Page extract]
Evaluating mechanical properties
Flexural tests yield valuable data on strength, stiffness, and toughness. By examining stress-strain curves from flexural tests, engineers can assess:
1495
[Page extract]
Applications in industrial settings
Insertion and withdrawal testing is not limited to electrical connectors. It is used to validate the performance of:
1496
[Page extract]
Applications across industries
Tensile strength testing is essential in product development, quality control, and certification across multiple sectors:
1497
[Page extract]
Case studies - real-world applications
Medical vial stoppers
A pharmaceutical company tested rubber vial stoppers to ASTM F2132 to ensure they resisted accidental puncture during handling.
1498
[Page extract]
Tools (calibration related)
To maintain consistent performance and accuracy, tools must be checked regularly.
1499
[Page extract]
Speak to an expert
Selecting the right trapezoidal tear testing setup requires understanding both the material and the relevant standards.
1500
[Page extract]
Speak to an expert
Torque testing is a critical part of packaging quality control, ensuring safety, compliance and brand integrity.