Search results
326
Accessory
Cable Cam Grip (small), serrated, 1 kN, 10-32 UNF
432-390
Cable Cam Grip - serrated, small
Designed for holding insulated cables and wire. The sample is secured by the cam, which self-tightens as a load is applied and spreads the load evenly.
Serrated cams are preferred for materials which may be slippy and…
327
Accessory
Compression Plate Rectangular, Hardened Steel, 396 x 596 mm, QC-20 or QC-32 fitting
Mec36-396x596-St
MEC36-396x596-St:
Rectangular compression plate in hardened steel featuring concentric circles for helping operators to place samples centrally. Also supplied with 4 fixing legs to support the weight of the steel plate. Suitable for hard specimens such…
328
Accessory
3- & 4-point Bend Jig, 50 kN, Aluminium, QC-32 fitting
Mec22-360
MEC22 - A fully-configurable 50 kN Bend Jig in aluminium.
The main support beam has a bending span up to 330 mm and can bear a wide selection of interchangeable single-roller or dual-roller anvils to suit your specimen material.
A single upper anvil…
329
Accessory
V-jaw vice clamp, four jaws on screw-action adjuster, QC-20 fitting
432-678
432-678 is a vice fixture for mounting to the base of a test stand when performing tension and compression tests. It has four jaws, with two jaws being vertically spaced on either side. This provides increased stability by clamping at alternate heights on…
330
Accessory
Pyramid jaws for Mec11-20 Scissor Grip, 10 kN, 25 x 100 mm
Mec11-20-BP100
Pyramid Jaws (25mm high x 100mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall. By using 100 mm width jaws tensile force is reduced to 10kN.
For materials which need a “bite” to secure a good grip (e.g. soft metals {…
331
Accessory
Pyramid (serrated) jaws for Mec227 Lightweight Vice Grip, 100 N, 10 x 25 mm
Mec227-BP25
Pyramid Jaws (10mm high x 25mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Opening span = 0 - 8mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals - aluminium, copper, soft steel, paper and…
332
Accessory
Pyramid (serrated) jaws for Mec240g U-Form Vice Grip, 5 kN, 30 x 50 mm
Mec240g-BP
Pyramid Jaws (30mm high x 50mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Opening span = see datasheet for various spans according to the grip body selected.
For materials which need a “bite” to secure a good grip…
333
Accessory
Pyramid-form jaws for 50 kN Scissor Grip, 50 kN, 50 x 100 mm
Mec11-50-BP
Pyramid Jaws (50mm x 100mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
334
Accessory
Diamond coated jaws for Mec240k Medium Vice Grip, 30 x 80 mm
Mec240k-BD80
Diamond Jaws (30mm x 80mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = see datasheet for various spans according to the grip body selected.
For materials which need a “bite” to secure a good grip (e.g. soft…
335
Accessory
3- & 4-point Bend Jig, 50 kN, Aluminium, QC-32 fitting
Mec22-360
MEC22 - A fully-configurable 50 kN Bend Jig in aluminium.
The main support beam has a bending span up to 330 mm and can bear a wide selection of interchangeable single-roller or dual-roller anvils to suit your specimen material.
A single upper anvil…
336
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 30 mm opening, pair, QC-20 fitting
Mec240k-S30+Ko
MEC 240k- S30+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-30mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter…
337
Accessory
Compression Plate - Hardened Steel, 50 kN, 116 mm, QC-32 fitting
Mec23-116-32-St
MEC23-116-32-St :
Round compression plate in hardened steel featuring concentric circles for helping operators to place samples centrally. Suitable for hard specimens such as metals, hard plastics, small stones and granules.
116mm diameter.
Fitted…
338
Accessory
3- & 4-point Bend Jig, 2.5 kN, Aluminium, QC-20 fitting
Mec238
MEC238 - A small yet fully-configurable 2.5 kN Bend Jig in aluminium.
The main support beam has a bending span up to 150 mm and can bear a wide selection of interchangeable single-roller or dual-roller anvils to suit your specimen material.
A single…
339
Accessory
Pin Chuck, 100 N, M6
432-214
Pin chucks are specifically designed for gripping circular or rod-type specimens of diameters between 0.5 - 3.5mm.
For tension and compression testing below 100N.
Fitted with adaptor having M6 female threaded hole & M6 grub-screw
340
Accessory
Pyramid (serrated) jaws, 30 x 30 mm, 0.5 set
Mec240k-BP
Pyramid Jaws (30mm x 30mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
341
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 52 mm opening, pair, QC-20 fitting
Mec240k-S50+2Ko
MEC 240k- S50+2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-52mm depending on the jaw types selected (sold separately). Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
342
Accessory
Set of 4 fixing pegs for torque testers - 35 mm high
432-447
Set of standard 35mm high gripping pegs.
These gripping pegs have a soft-rubber sleeve to clamp and keep samples secure and vertically aligned during torque testing.
Pegs are fitted with an M6 thread and attach to upper and lower Torque Fixing Tables…
343
Accessory
Compression Plate Square, Hardened Steel, 396 x 396 mm, QC-20 or QC-32 fitting
Mec36-396-St
MEC36-396-St:
Square compression plate in hardened steel featuring concentric circles for helping operators to place samples centrally. Also supplied with 4 fixing legs to support the weight of the steel plate. Suitable for hard specimens such as metals…
344
Accessory
90-degree Peel Jig for FPT-H1
432-620
This 90-degree Peel Jig fits to the FPT-H1 for 90 degree peel testing of pressure sensitive tapes and labels in accordance with international standards.
FINAT FTM2, ASTM D330. PSTC 101 Method F.
It accepts interchangeable float glass and stainless steel…
345
Accessory
Diamond coated jaws for Lightweight Pneumatic Plane Grip, 200 N, 25 x 25 mm
Mec94-BD25
Diamond Jaws (25mm high x 25mm wide) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = 0 - 20 mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and…
346
Accessory
Pyramid (serrated) jaws for Mec154 Heavy-duty Vice Grip, 20kN, 40 x 100 mm
Mec154-BP100
Pyramid Jaws (40mm high x 100mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Opening span = 0 - 13 mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper…
347
Accessory
Dial Gauge Bracket Set
432-167
The dial gauge bracket set allows an analogue or digital comparator to be securely fitted to the MDD manual test stand. Digital comparators are suitable for measuring crosshead movement over short distances.
348
Accessory
Wave jaws for Mec83 U-Form Pneumatic Vice Grip, 5 kN, 40 x 60 mm
Mec83-BW
Wave Jaws (40mm x 60mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
Opening span = 0-10mm, 10-20mm or 20-30mm depending on which rod and piston are fitted to the Mec83 body.
For flexible but slippy materials which need more…
349
Accessory
Square Perforated Aluminium Compression Plate, 400 x 400 mm, QC-20 or QC-32 fitting
Mec36L-400-L6x20
MEC36L-400-L6x20
Square Compression Plate in aluminium featuring perforations to allow air release during testing - suitable for foam testing. Holes are 6mm diameter and spaced at 20mm intervals.
Dimensions: 400mm x 400mm.
Fitted with QC-20mm or 32mm…
350
Accessory
Adapter, 500 N, 10-32 UNF to 5-16 UNC, F to F
432-329
Female-to-female Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.