Search results
1526
[Page extract]
Why flexural strength is important
Flexural strength testing is a vital tool for ensuring material reliability and safety in end-use conditions.
Applications across industries:
1527
[Page extract]
Comparison with other peel tests
A 90° peel test is often used for flexible packaging films.
1528
[Page extract]
Share and analyse data
All test data can be automatically exported in a format of your choice, from text files and tabulated formats, to Microsoft Excel and email. Data can be exported directly through RS-232 for data-analysis packages.
1529
[Page extract]
Speak to an expert
Selecting the right trapezoidal tear testing setup requires understanding both the material and the relevant standards.
1530
[Page extract]
Applications in industry
The Delft tear test is used wherever rubber and thermoplastics need to maintain performance under stress. Common uses include:
1531
[Page extract]
Introduction to secant modulus
In material testing and engineering, understanding how a material responds to applied stress is essential for predicting performance, ensuring safety, and optimising design.
1532
[Page extract]
Introduction to short span compression tests
The short span compression test (SCT) is a mechanical testing method used to measure the compressive strength of materials over a very short span.
1533
[Page extract]
Introduction to tear testing
Tear testing is a quality control procedure used to measure the resistance of a material to tearing under controlled conditions.
1534
Test Frame
MultiTest test frame (twin column)
MultiTest test frame
A motorised test frame driven by twin ballscrews featuring dual-columns and designed to apply tension and compression from 2 N right up to a capacity of 50 kN (1100 lbf).Its versatile construction makes it perfectly suited for testing…
1535
[Page extract]
Methods of compressive burst testing
Inflationary burst testing
In this method, internal pressure is gradually increased using air, gas, or liquid until the container ruptures. This is widely applied to:
1536
Product
Máy kiểm tra kéo có động cơ
Alluris FMT-W40
PSV21018
FMT-W40 là thiết bị kiểm tra kéo đầu cuối dây có động cơ. Nó có sẵn trong 2 kiểu với khả năng chịu kéo lên đến 500N (110 lbf) hoặc 1000N (220 lbf). Nó chắc chắn, nhỏ gọn và chiếm ít không gian trên mặt bàn. Được thiết kế đặc biệt để dễ sử dụng với mức đào…
1538
Accessory
Blank (smooth) jaws for Mec227 Lightweight Vice Grip, 250 N, 10 x 50 mm
Mec227-B50
Blank Jaws (10mm x 50mm) - smooth aluminium jaw. Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = 0 - 6mm.
Supplied as 0.5 set = 2 jaws (left…
1539
Accessory
Blank (smooth) jaws for Mec227 Lightweight Vice Grip, 100 N, 10 x 100 mm
Mec227-B100
Blank Jaws (10mm x 100mm) - smooth aluminium jaw. Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = 0 - 6mm.
Supplied as 0.5 set = 2 jaws (left…
1540
Accessory
QC Type D Loadcell Mounting Plate, 19 mm slot, c/w M6 bolt for 500 N S-beam loadcells
432-285
QC Type D Loadcell Mounting Plate c/w M6 bolt.
Fitted with 19 mm slot to suit 500 N S-beam loadcells. The M6 bolt is used to secure the mounting plate onto the loadcell so that a QC type C Male Post (432-284) can be affixed to the loadcell.
1541
Accessory
Blank (smooth) jaws for Mec227 Lightweight Vice Grip, 250 N, 10 x 25 mm
Mec227-B25
Blank Jaws (10mm x 25mm) - smooth aluminium jaw. Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = 0 - 8mm.
Supplied as 0.5 set = 2 jaws (left…
1542
Accessory
Set of 4 fixing pegs for torque testers - 100mm high
432-250
Set of 100mm high extended-length gripping pegs.
These gripping pegs have a soft-rubber sleeve to clamp and keep taller samples secure and vertically aligned during torque testing.
Pegs are fitted with an M6 thread and attach to upper and lower…
1543
Accessory
V-jaws for Mec11-20 Scissor Grip, 20 KN, Ø 4 - 15 mm diameter
Mec11-20-BV
V-Jaws (4-15mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
Grip opening to suit round samples of 10 - 48mm diameter where flat jaws do not provide enough surface contact (e.g. wires, rods,…
1544
Accessory
Blank (smooth) jaws for Mec227 Lightweight Vice Grip, 250 N, 10 x 100 mm
Mec227-B100
Blank Jaws (10mm x 100mm) - smooth aluminium jaw. Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = 0 - 6mm.
Supplied as 0.5 set = 2 jaws (left…
1545
Accessory
Smooth jaws for Mec11-5 Scissor Grip, 5 kN, 20 x 50 mm
Mec11-5-B
Blank Jaws (20mm x 50mm) - smooth steel jaw. Allows user to machine or affix own surface.
Supplied as 0.5 set = 2 jaws (left & right). Order any combination of 2 half sets of jaws to fit into a pair of MEC11-5 Scissor Grips (upper & lower)
1546
Accessory
Mounting plate for QC-20 Male Post on 50 kN systems
432-622
Allows QC type C Adapter (20mm Male Post) to be fitted directly to the base of 50 kN test systems.
Used when QC-20 grips and fixtures are in long-term use on 50kN test stand.
Supplied with 6 screws of M6 thread.
1547
Accessory
Blank (smooth) jaws for Mec154 Heavy-duty Vice Grip, 20 kN, 40 x 100 mm
Mec154-B100
Blank Jaws (40mm high x 100mm wide) - smooth steel jaw.
Opening span = 0 - 34 mm.
Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Supplied as 0.5 set = 2 jaws (left…
1548
Accessory
Smooth jaws for Mec11-20 Scissor Grip, 20 kN, 25 x 50 mm
Mec11-20-B
Blank Jaws (25mm x 50mm) - smooth steel jaw. Allows user to machine or affix own surface.
Supplied as 0.5 set = 2 jaws (left & right). Order any combination of 2 half sets of jaws to fit into a pair of MEC11-20 Scissor Grips (upper & lower)
1550
Accessory
QC Type M Loadcell Mounting Plate, 13 mm slot c/w M6 bolt for 100 N and 200 N S-beam loadcells
432-452
QC Type M Loadcell Mounting Plate c/w M6 bolt.
Fitted with 13 mm slot to suit 100 N and 200 N S-beam loadcells. The M6 bolt is used to secure the mounting plate onto the loadcell so that a QC type C Male Post (432-284) can be affixed to the loadcell.