Search results
1101
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 30 mm opening, pair, QC-20 fitting
Mec240k-S30+2Ko
MEC 240k- S30+2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-30mm depending on the jaw types selected (sold separately). Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
1102
Accessory
Film Grips, 500 N, 10-32 UNF
432-157
Used for flexible samples such as films, where conventional flat-faced grips may create stress points and so artificially reduce tensile strength. Samples are wrapped around the roller thereby spreading the load around the diameter.
Grips are supplied…
1103
Accessory
Spring-loaded Pinch Grip with Chain Link, 10 N, QC-20 fitting
MecS205k
A Spring-loaded Pinch Grip designed for small-area contact (10mm x 10mm) to grip a delicate sample.
The sprung-loaded adjustable screw-mechanism allows an opening up to 3.4mm and acts in a pincer motion to secure specimens.
Fitted with a flexible chain…
1104
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 10 mm opening, pair, QC-20 fitting
Mec240k+2Ko
MEC 240k +2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-10mm depending on the jaw types selected (sold separately).
Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
1105
Accessory
Extended Peg Hook, 50 N, 10-32 UNF
432-181
The extended peg hook is supplied fitted to a short chain link assembly having a 10-32 UNF female thread. It is used for gripping clothing attachments with a loop, e.g. a bow, when carrying out pull-off "test-to-failure" tests.
Typically used in…
1106
Accessory
Pyramid (serrated) jaws, 30 x 100 mm, 0.5 set
Mec240k-BP100
Pyramid Jaws (30mm x 100mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
1107
Accessory
V-jaw vice clamp, four jaws on screw-action adjuster, QC-20 fitting
432-678
432-678 is a vice fixture for mounting to the base of a test stand when performing tension and compression tests. It has four jaws, with two jaws being vertically spaced on either side. This provides increased stability by clamping at alternate heights on…
1108
Accessory
Pin Chuck, 100 N, 10-32 UNF
432-382
Pin chucks are specifically designed for gripping circular or rod-type specimens of diameters between 0.5 - 3.5mm.
For tension and compression testing below 100N.
Fitted with adaptor having 10-32 UNF female threaded hole & 10-32 UNF grub-screw
1109
Accessory
Mettler Toledo RS-P26 printer (US)
432-516
A basic ticket printer with simple statistical analysis manufactured by Mettler Toledo.
Communicates with Mecmesin force gauges via RS232 serial link - order interface cable separately.
Supplied with mains-power adaptor 110V with plug (2-pin flat)
Uses…
1110
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 20 mm opening, pair, QC-20 fitting
Mec240k-S20+Ko
MEC 240k- S20+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-20mm depending on the jaw types selected. Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic piston.
This…
1111
Accessory
Popper Cam Base, 1 kN, 10-32 UNF
432-179
The Popper Cam Base is used to secure the fabric when testing the strength of press studs ('poppers'), particularly on children’s clothing.
It is secured to the base of the test stand and the popper is fed through the retaining hole and positioned over…
1112
Accessory
Pyramid (serrated) jaws, 30 x 30 mm, 0.5 set
Mec240k-BP
Pyramid Jaws (30mm x 30mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
1113
Accessory
FINAT 9 Loop-Tack Test Fixture (lower), 200 N, QC-20
PDV13016-A
The FINAT 9 Loop Tack Test Fixture (lower) is fitted to the anvil plate of a motorised test stand.
It comprises a dedicated holder for 25mm x 75mm float glass onto which the adhesive-coated test strip is fixed according to the requirements of the FINAT…
1114
Accessory
Large Chain Link Assembly (short), 2.5 kN, 5-16 UNC
PSV8057
The Large Chain Link Assembly (short length) is fitted with a 5-16 UNC female thread and supplied with a male grub-screw.
It is fixed to other grips thereby allowing a flexible connection, which is often used for providing alignment when pulling large…
1115
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 52 mm opening, pair, QC-20 fitting
Mec240k-S50+Ko
MEC 240k- S50+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-52mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic…
1116
Accessory
Pin Chuck, 100 N, M6
432-214
Pin chucks are specifically designed for gripping circular or rod-type specimens of diameters between 0.5 - 3.5mm.
For tension and compression testing below 100N.
Fitted with adaptor having M6 female threaded hole & M6 grub-screw
1117
Accessory
3-Jaw Popper Pull-off Fixture, 500 N, 10-32 UNF
432-409
The 3-Jaw Popper Pull-Off Fixture is supplied fitted to a short chain link assembly having a 10-32 UNF female thread. It is used for to securely holding 13-15 ligne press-studs ('poppers') when carrying out pull-off "test-to-failure" tests.
Typically…
1118
Accessory
Clevis Grip (Large) c/w quick-release pin, 5 kN, M12
432-443
Large Clevis Grip c/w quick-release pin.Fitted with female M12 thread.
Used for testing heavy duty tension springs and securing odd-shaped parts when testing tensile forces below 5 kN.
1119
Accessory
Large Pinch Grip, 500 N, M6
432-278
The Large Pinch Grip is fitted with 10mm high x 25mm wide cross-hatch jaw faces to ensure samples are held securely for tensile tests below 500 N.
One jaw is fixed and the other jaw is on a spring-loaded hinge which opens to 15mm. Fast installation and…
1120
Accessory
Inverted Chisel Point, Ø 12 mm, 5 kN, 5-16 UNC
432-357
For compression testing of cylindrical or wire specimens up to 5 kN.
Specimen is located centrally within the inverted V-shape and compressed to a set distance or a break.
Fitted with a 5-16 UNC female thread for connection to loadcell
1121
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 10 mm opening, pair, QC-20 fitting
Mec240k+Ko
MEC 240k +kO (body only) :
A pair of pneumatically-operated, Single-action Medium Vice Grips with an opening of 0-10mm depending on the jaw types selected (sold separately).
Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic…
1122
Accessory
Pyramid (serrated) jaws, 30 x 80 mm, 0.5 set
Mec240k-BP80
Pyramid Jaws (30mm x 80mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
1123
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 20 mm opening, pair, QC-20 fitting
Mec240k-S20+2Ko
MEC 240k- S20+2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-20mm depending on the jaw types selected. Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow the test specimen…
1124
Accessory
Extension Rod, 130 mm, 500N, 10-32 UNF
432-117
Extension rod 130mm long supplied with locking nut to ensure alignment of grip. Comprises 10-32 UNF female to 10-32 UNF male threads.
Suitable for use with digital force gauges made from 1990 - 2006.
1125
Accessory
FPT-H1 loadcell calibration checking kit
432-635
For checking the calibration accuracy of loadcell type HILC used on the FPT-H1 Friction-Peel-Tear Tester.
Comprises a fixing plate with pulley, bench clamp and cord.
For use with Lightweight hanger and masses (part numbers 432-655 and 432-656).