Standards
Featured or equivalent test standards for Mecmesin solutions in this section
Top-load crush test of plastic bottles
Silgan Plastics has utilised the Mecmesin tester in several of our plants over the last two years to monitor top-load. It brings a wealth of features at a very competitive price. We pride ourselves on being the forefront of container performance and capability and the 5-x top-load tester is a valued piece of our strategy.
Randy Blankenship, Quality Engineer
Silgan Plastics


Screw-cap torque test on PET bottles
"Mecmesin, through their Portuguese supplier Egitron, presented us with a good solution: reliable equipment and user-friendliness that was adequate for our needs. All our operators are capable of using this equipment because it is very simple to operate. I enjoy dealing with Egitron because they offer excellent technical support."
Miguel Carvalho, Quality Assurance Manager
Água de Luso


Torque testing beauty product closures
"Mecmesin's Tornado testers are very easy to use. Even people who had no experience in this area found them simple to operate. We achieved very reliable results and found that the Tornadoes were easily adapted to test many different bottles and pots. The machines produced printed paper results or a digital file and we found this was a very easy way of keeping opening torque records. They are a very useful instrument for packaging."
Zachos Elias, Quality Control
Korres Natural Products S.A.


Nail Varnish Closure Removal Torque and Capping Check
The Mecmesin system has helped us deliver a better product to our customers with less breakages and leaks. The Tornado is used every 2 hours to ensure the torque of the nail varnish caps are within working range.
Gregorio Suarez, Quality Control and Production Manager
Barry M Cosmetics Ltd.


Cable and pipe pull-out force batch testing system
"We have made pull-out tests for many years, but with our new equipment, we get the result much quicker and with better accuracy. We can rapidly prepare and perform advanced tests and present the result in a more precise way for both customers and our colleagues, within research and development. The new equipment enables studies of how much force is needed to make a cable or pipe start moving within a seal. The test fixture was developed at CA Mätsystem AB (Mecmesin’s distributor) in Sweden, especially for Roxtec products, in order to enable a thorough testing of all existing Roxtec solutions. All results are stored in a database providing extended knowledge for future product development, as well as, useful information for customers and sales people."
Patrik Cederholm, Tests & Certificates Engineer
Roxtec International AB


Tensile test on rubber gaskets
We use the Mecmesin MultiTest 10-i system to perform regular quality control tests to guarantee the quality of our supplied materials. Mecmesin provided us with a cost-effective solution to our needs and exceptional customer service. I would have no hesitation in recommending them to other companies with materials testing requirements.
Michael Hubbard, Business Quality Manager
British Gaskets Group


Dispositivo de entrega de vacinas e testes de embalagem
Dispositivo de entrega de vacinas e testes de embalagem
Frascos: penetrabilidade da agulha da rolha, força residual do selo e teste de torque
Frascos: penetrabilidade da agulha da rolha, força residual do selo e teste de torque
The Mecmesin MultiTest 1-x enables us to ensure the consistently high manufacturing quality of our PET bottles. The system conveniently allows us to perform top-load testing and confirm free height and integrates easily with our data collection system, increasing our analytical efficiency. I would have no hesitation in recommending this first rate instrument.
John Gilroy, Quality Manager
Esterform Packaging Ltd

Top-load crush test of plastic bottles
Silgan Plastics has utilised the Mecmesin tester in several of our plants over the last two years to monitor top-load. It brings a wealth of features at a very competitive price. We pride ourselves on being the forefront of container performance and capability and the 5-x top-load tester is a valued piece of our strategy.
Randy Blankenship, Quality Engineer
Silgan Plastics

Screw-cap torque test on PET bottles
"Mecmesin, through their Portuguese supplier Egitron, presented us with a good solution: reliable equipment and user-friendliness that was adequate for our needs. All our operators are capable of using this equipment because it is very simple to operate. I enjoy dealing with Egitron because they offer excellent technical support."
Miguel Carvalho, Quality Assurance Manager
Água de Luso

The Mecmesin CombiCork is a Quality tool that allows Korbel to test cork materials, ensuring they match with Korbel’s stringent quality standards. Testing removes subjectivity from the uncorking of champagne corks, troubleshooting our process or material variation, so our customers are able to have a consistent experience every time they open a bottle of the finest Korbel California Champagne.
Rick Marson, Technical Director
Korbel California Champagne

Torque testing beauty product closures
"Mecmesin's Tornado testers are very easy to use. Even people who had no experience in this area found them simple to operate. We achieved very reliable results and found that the Tornadoes were easily adapted to test many different bottles and pots. The machines produced printed paper results or a digital file and we found this was a very easy way of keeping opening torque records. They are a very useful instrument for packaging."
Zachos Elias, Quality Control
Korres Natural Products S.A.

Nail Varnish Closure Removal Torque and Capping Check
The Mecmesin system has helped us deliver a better product to our customers with less breakages and leaks. The Tornado is used every 2 hours to ensure the torque of the nail varnish caps are within working range.
Gregorio Suarez, Quality Control and Production Manager
Barry M Cosmetics Ltd.

The Combi Cork Extraction Tester helped us to simplify measurements because it is easy to set up. This system provides consistent reproducible and safe measurements, without any risk of injury to the operator. Therefore, we can establish valuable opening torque specifications, which are currently used for quality control measurements and development of new products.
Dominique Rabiot, R&D manager
Oeneo Bouchage
Cable and pipe pull-out force batch testing system
"We have made pull-out tests for many years, but with our new equipment, we get the result much quicker and with better accuracy. We can rapidly prepare and perform advanced tests and present the result in a more precise way for both customers and our colleagues, within research and development. The new equipment enables studies of how much force is needed to make a cable or pipe start moving within a seal. The test fixture was developed at CA Mätsystem AB (Mecmesin’s distributor) in Sweden, especially for Roxtec products, in order to enable a thorough testing of all existing Roxtec solutions. All results are stored in a database providing extended knowledge for future product development, as well as, useful information for customers and sales people."
Patrik Cederholm, Tests & Certificates Engineer
Roxtec International AB

The MultiTest 0.5-i is a very good and reliable machine and the Emperor™ Software brings great advantages. It’s a very useful tool for these kinds of tests. It’s fully programmable and offers an in-depth analysis of results. It’s a precious tool for everybody involved, especially those who work with plastics and their mechanical performance.
Nikos Michopoulos, Quality Control
Eurofilm Mantzaris S.A.

Tensile test on rubber gaskets
We use the Mecmesin MultiTest 10-i system to perform regular quality control tests to guarantee the quality of our supplied materials. Mecmesin provided us with a cost-effective solution to our needs and exceptional customer service. I would have no hesitation in recommending them to other companies with materials testing requirements.
Michael Hubbard, Business Quality Manager
British Gaskets Group

The new xt system is simple and tough enough for us to use in a production environment, while simultaneously allowing us to get the information we need. Being a complete system has made integrating it into our Quality Assurance system straight forward. The information we receive allows us to preempt issues before they can affect quality, with much less effort than previously. This means we have less waste, improved efficiencies and can spend more time making our products.
William Thorley, Project Engineer
Reckitt Benckiser PLC

The Millennium Seed Bank had a need to quantify the tightness of screw capped glass bottles used for long term storage of wild plant seed. Having established the optimum torque, the Orbis 6 N.m is used routinely to maintain the correct tightness of the bottles. The design of the Orbis makes it simple to use and easy to adapt to different containers.
Keith Manger, Laboratory Manager
Kew Gardens

"We perform a variety of tests on our pump products. One of which is to evaluate their release torque. In order to precisely apply torque to screw and unscrew the pumps, we use Mecmesin equipment. These instruments prove their value to us through their ease-of-use and accuracy."
Christoph Szymiczek, Manager, Technical Service
Pfeiffer, now Aptar

Torque de remoção da tampa do cateter
Força de formação de caixa e esmagamento de borda de caixas
Força de formação de caixa e esmagamento de borda de caixas
Teste de resistência do duto do cabo
Teste de esmagamento de borda (ECT) de papelão ondulado
Teste de esmagamento de borda (ECT) de papelão ondulado

Fale com um especialista
Tem uma pergunta sobre um produto? Solicite uma chamada de volta de um de nossos engenheiros técnicos de vendas agora.