Mecmesin | Search results

Case study

Testing fluid control valves and seals

Requirement A typical gas lift system for oil and gas production requires a set of valves to operate along the production tubing down the drilling well.

Case study

Peel strength and elongation testing of water-blocking tape

Requirement Ekstel d.o.o. manufactures a range of water-blocking tapes under the branding X-tra tapes®, which have specific applications in the cable industry.

Case study

Abrasion and micro-scratch testing of wood and laminate surfaces

Requirement The use of natural materials has long been a unique selling point across many consumer product lines.

Case study

Connection test on fuel injection components

Requirement A number of destructive and non-destructive tests were required on a plastic assembly used in a fuel injection assembly. The tests included:

^{[Page extract]}

Software-controlled torque systems

Sophisticated power with easy of use Looking for an automated torque testing system to improve the accuracy and repeatability of your measurements compared to manual torque testers?<

Case study

Break-loose and sustaining force tests of pre-filled drug cartridges to ISO 11608-3

Requirement Mechanical pen injectors for delivering drugs, such as insulin, have found increasing acceptance over the traditional vial-and-syringe method. Advances in pen design have made models increasingly user-friendly, allowing superior ac

Case study

Plasterboard penetration testing for performance and durability

Requirement Saint-Gobain (British Gypsum) are leaders in the design; production and distribution of materials for the construction; industrial and consumer markets and are Europe’s largest distributor of building materials.

Case study

Shotgun cartridge separation force and crimp strength testing

Requirement When making small arms ammunition, such as shotgun cartridges, the shot pellets, wad and powder are contained in a plastic case.

Case study

Lap shear testing of plywood

Requirement Estonian Plywood (part of the Lemeks/Tarmeko group) is a leading manufacturer of uncoated birch plywood; harvested from sustainable well-managed forests.

Case study

Spring testing in the EMS sector

Requirement GPV Asia (Thailand) Co., Ltd. is a leading manufacturer in the metal-forming electronic equipment sector.

Case study

Pen injector training aid testing

Requirement Crux Product Design is an innovative design agency which sees products through from a creative idea to production reality.

Case study

Surfboard foam three-point bend test

Requirement A company manufacturing surfboard blanks, made from rigid polyurethane (PU) foam, undertake a stringent testing program to guarantee the rigidity of the foam and strength of the final surfboard product.

Case study

Fishing net tensile strength testing to ISO1805 and ISO1806

Requirement Fishing nets are one of the key tools in commercial fishing and there are many types of active and passive netting gear available.

Case study

Golf ball deflection test

Requirement A golf ball manufacturer has factories based in both the US and India.

Case study

Surgical rubber glove tensile strength testing

Requirement When selecting specialist gloves it is often the material strength and stretch which are the most important factors in determining quality and performance.

Accessory

Rotating Crimp Receptacle for CrimpTest-1 kN

432-605

Rotating Crimp Receptacle for CrimpTest-1 Tester (supplied as standard with the Tester) A versatile crimp termination holder that accommodates a wide range of terminal sizes. The inner slotted ring rotates to fit up to 10 different-sized crimp…

Case study

Tensile test on footwear materials

Requirement William Lamb Footwear is one of the UK's leading footwear distributors. A test system was required to measure and ensure that the footwear and its components passed quality standards set out by their end-customers.

Case study

Tennis ball compression test

Requirement The ITF (International Tennis Federation) invited Mecmesin to bid for a project to replace their outdated ‘Stevens’ test machine used to measure the force to ‘squash’ a tennis ball.

Case study

Adhesive bond strength of construction panels

Requirement SIPS Frames UK Ltd (SIPS Eco Panels) is one of the UK’s leading independent Structural Insulated Panel System manufacturers, for use in the construction of kit houses by self builders.

Case study

Filter test station

Requirement The following tests were required in a simple-to-use system for a series of tests on automotive filters:

Case study

Ceramic road marker compression and flexural strength testing to ASTM 4280

Requirement Saudi Ceramics manufacture non-reflective road markers for indicating traffic lane delineation, shoulders and other direction markings.

Product

万能試験機

オムニテスト 10/25/50

820-110

当社の新しいベンチトップ万能試験機 (UTM) は、材料、製品、コンポーネントの引張試験および圧縮試験用に設計されています。これらの汎用性の高いユニバーサルテストシステムは、当社の強力で直感的なVectorPro™ テストソフトウェアによって駆動され、あらゆる業界にわたる品質保証標準の実装に簡単に使用できます。 PC 駆動モデルには、選択したコンピューターハードウェアでテストルーチンを実行できる柔軟性があります。ツインカラム OmniTest は、定格荷重10 kN、25 kN、および 50…

Product

Compression tester

SqueezerPro

820-525

Crafted to evaluate packaging performance, SqueezerPro offers powerful insights into the compressive strength performance of various board mediums, closures, interior partitions, and other critical design variables. SqueezerPro can also be used to conduct…

Product

低力材料テスター

MultiTest-dV

810-401

拡張負荷センサー、VectorPro MTソフトウェア、およびオプションの伸び計で構成されたMultiTest-dVは、この電動フォーステスターを基本的な材料テスターに変換します。これにより、MultiTest-dVはQCラボでの品質保証チェックに理想的な選択肢となり、R＆Dラボでの材料特性のより詳細な分析に必要なパワーを提供します。

100

Case study