Search results
226
Accessory
QC Type J, lightweight adapter, Ø 20 mm M to 10-32 UNF F c/w pin
432-418
Quick-Change Male Post to Thread Adapter (lightweight)
Fixes directly to the 10-32 UNF screw in anvil plate of test stands or to the 10-32 UNF extension rod connected to loadcells…
227
Accessory
Miniature Vice Grip, 100 N, QC-20 fitting
MecS341
Versatile, easy to use, and suitable for small components (eg bonded joints) where access is limited and tensile forces are below 100 N.
Clamping surfaces are machined with pyramid-shaped serrations to ensure optimum gripping force.
The flexible chain-…
228
Accessory
Cork Extraction Test Rig
432-676
The Cork Extraction Test Rig is used to test the extraction force of corks and other bottle stoppers.
The lower part of the fixtures fits to the base of a test stand. It has a bottle cradle with an anti-slip surface and is easily adjusted to accommodate…
229
Accessory
Scissor Grip, 50 kN, QC-32 fitting
Mec11-50
MEC11-50 (Body only) :
Scissor-action grip rated to 50 kN fitted with QC-32 connection. Locking function allows grip to remain open when inserting specimen.
Spring tension provides enough clamping force to prevent the specimen from slipping when…
230
Accessory
Scissor Grip, 50 kN, QC-32 fitting
Mec11-50
MEC11-50 (Body only) :
Scissor-action grip rated to 50 kN fitted with QC-32 connection. Locking function allows grip to remain open when inserting specimen.
Spring tension provides enough clamping force to prevent the specimen from slipping when…
231
Accessory
Scissor Grip, 5 kN, QC-20 fitting
Mec11-5
MEC11-5 Scissor-action grip (Body only) :
Rated to 5 kN fitted with QC-20 connection.
Spring tension provides enough clamping force to prevent the specimen from slipping when initially inserted. The rated tensile force changes according to the opening…
232
Accessory
Scissor Grip, 5 kN, QC-20 fitting
Mec11-5
MEC11-5 Scissor-action grip (Body only) :
Rated to 5 kN fitted with QC-20 connection.
Spring tension provides enough clamping force to prevent the specimen from slipping when initially inserted. The rated tensile force changes according to the opening…
233
Accessory
Padded Radiused Probe, 500 N, 5-16 UNC
432-414
The Padded Radiused Probe is used with a short extension rod to connect to a digital force gauge to measure tension and compression.
It has a thin layer of rubber and is specially designed for use in manual handling and ergonomic assessment applications…
234
Accessory
Mini V-block, for Orbis & Tornado
432-423
The Mini V-block is a precision-engineered vice assembly which allows smaller specimens to be securely held in a centrally-aligned position, without excessive clamping force.
Supplied with V-shape, rubber-coated, interlocking jaws with an opening span…
235
Accessory
Footswitch to simulate 'Start' on MultiTest-i and 'xt' stands
PDV14081
Footswitch to simulate 'Start' on '-i' and 'xt' stands from the Vortex, Helixa and MultiTest product families.
Used to free-up an operators hands for other operations (eg. holding a specimen between grips) when launching a test.
236
Accessory
Sequin Pull-off Fixture, 50 N
432-291
The sample fabric is typically held in a separate 'grab test' textile fixture (432-323) mounted to the anvil plate. The sequin or other small appliqué is then clamped in the serrated jaw of a pair of 'Kelly' clamping forceps. This is then placed over a…
237
Accessory
Pistol Grip, 500 N
432-389
For applications that require a single-handed operation for the comfortable application of push/pull loads, the Pistol Grip can be attached to a BFG or AFG digital force gauge (fixing screws included).
Commonly used for manual-handling applications.
238
Accessory
Container Holder, 100 N, 10-190 mm
432-411
A versatile gripping fixture to hold containers when conducting low-force pull-off tests on closures and other fixings (eg. flip-cap lids).
4-pegs hold the container on an adjustable lead-screw and the knob secures the container tightly in place.…
239
Accessory
Automated Syringe Batch Tester
PDV19179
The Automated Syringe Batch tester is a bench-top system for checking the ‘break-loose’ and ‘glide force’ of up to 12 individual syringes in one ‘load-and-run’ cycle. In the face of increased demand on production of syringes, this system enables larger…
240
Product
Automated bottle closure tester
ABC-t
The ABC-t is an automated bottle closure tester to measure both initial slip and bridge torque of a complete batch of roll-on-pilfer-proof (ROPP) closures.
Automated batch testing of closures ensures repeatability without the need for an operator during…
241
Accessory
Scissor Grip, 20 kN, QC-20 or QC-32 fitting
Mec11-20
MEC11-20 (Body only) :
Scissor-action grip rated to 20 kN fitted with either QC-20 or QC-32 connection.
Locking function allows the grip to remain open when inserting a specimen.
Spring tension provides enough clamping force to prevent the specimen…
242
Accessory
Scissor Grip, 20 kN, QC-20 or QC-32 fitting
Mec11-20
MEC11-20 (Body only) :
Scissor-action grip rated to 20 kN fitted with either QC-20 or QC-32 connection.
Locking function allows the grip to remain open when inserting a specimen.
Spring tension provides enough clamping force to prevent the specimen…
243
Accessory
QC Type A Adapter, 20 mm M to 5-16 UNC F, c/w pin
432-282
Quick-Change Male Post to Thread Adapter
Fixes directly to the 5-16 UNC screw in anvil plate of test stands or to the 5-16 UNC extension rod connected to loadcells…
244
Accessory
Large Pneumatic Plane Grips, pyramid-faced jaws, 1 kN, Pair, QC-20 fitting
432-276
A pair of pneumatically-operated, single-action Large Pneumatic Plane Grips with an opening of 0-14 mm.
Each 30mm high x 51mm wide jaw is fitted with a pyramidal surface to secure specimens tightly. The specimen is held between the fixed jaw and the…
245
Accessory
Miniature Vice Grip, 100 N, QC-20 fitting
MecS341
Versatile, easy to use, and suitable for small components (eg bonded joints) where access is limited and tensile forces are below 100 N.
Clamping surfaces are machined with pyramid-shaped serrations to ensure optimum gripping force.
The flexible chain-…
246
Case study
Syringe needle fracture resistance under bending loads
Requirement
Dong-A ST, based in South Korea, is becoming well established as a global company in the field of ethical pharmaceutical drugs.
It also has a medical device business and multi-faceted Research and Development division.
247
Case study
Testing rubber to materials standards
Requirement
Characterisation of materials is essential to have confidence in their performance in the manufactured products and components they are subsequently used in.
248
Case study
Thermoformed plastic packaging hinge tear and pop-lock engagement
Requirement
Par-Pak Europe Ltd manufacture thermoformed plastic containers and trays for packing, retail and distribution in the food industry.
249
Case study
Battery terminal weld integrity tensile test
Requirement
BMZ is one the largest European suppliers involved in the design and manufacture of specialist custom made battery systems for mobile power applications.
250
Case study
Peel strength and elongation testing of water-blocking tape
Requirement
Ekstel d.o.o. manufactures a range of water-blocking tapes under the branding X-tra tapes®, which have specific applications in the cable industry.