Mecmesin | Search results

376

Case study

Child safety - force to extract lighter

Requirement The customer manufactures lighters and is currently developing a case/guard designed to increase the safety for children.

377

Case study

Cosmetics tube flip-cap attachment strength

Customised engineering example Many flip-caps on flat-sealed cosmetics tubes are not designed for removal by the consumer under normal use.

378

^{[Page extract]}

BS EN 5057

Specifies requirements for dimensions, performance characteristics and test programme. section 16 is insertion & withdrawal force test

379

Case study

Using a UTM as a calibration tool for loadcells

Requirement When it comes to configuring and calibrating a loadcell in tension and compression this can be a time-consuming process, particularly when the loads concerned are too high to use a set of calibrated weights (also known as ‘masses’)

380

Event

Wire Crimp & Weld Testing Webinar

The only way of really knowing the strength of a crimped terminal is to pull it.

381

Case study

Industrial fluid container dispensing cap application and removal force

Requirement A system was required to measure the push-on force and removal force of an injection-moulded cap from a new design of oil can.

382

Case study

Medical sharps bin puncture resistance

Customised engineering example International standards (ASTM F2132, BS 7320, BS 23907) specify the puncture resistance of medical sharps containers.

383

Case study

Child safety - force to access lighter

Requirement The customer manufactures lighters and is currently developing a case/guard designed to increase the safety for children.

384

Case study

Seat belt locking device test

Requirement The customer requested a system to measure the force required to release the locking mechanism of a car seat-belt whilst it is under tension.

385

Case study

Duvara monte hava spreyi yıkıcı yükleme değerlendirmesi

gereklilik Müşteri, duvara monte edilmiş bir hava spreyi için 350N'lik kontrollü bir yük uygulamak ve üzerinde duran bir çocuğun etkisini çoğaltmak istedi.

386

Case study

Page pull strength test

Requirement Mecmesin collaborated with a customer to design and develop a force measurement system to determine book binding adhesive strength in retaining individual pages.

387

Case study

Lap shear testing of plywood

Requirement Estonian Plywood (part of the Lemeks/Tarmeko group) is a leading manufacturer of uncoated birch plywood; harvested from sustainable well-managed forests.

388

Case study

Clothing button pull-off TTF test

Requirement The customer was a supplier to major UK clothing retailer Marks & Spencer, who stipulate that all fasteners and attachments must be tested to failure.

389

^{[Page extract]}

CETIE Guide 9

This guide applies to the screw capping of pressurised wines & other beverages for narrow necks finishes with a redrawn metallic tamper-evident closure on a "BVS type" glass finish adapted for pressure caps. Includes sections on checking load setting on

390

Case study

Hygienic disposal bin closure testing

Customised engineering example A manufacturer of hygienic disposal bins came to us with a nappy (diaper) disposal unit fitted with a rotary intake mechanism.

391

Case study

Krimp test kabloları

gereklilik Telekom ve elektronik sektörlerindeki müşterilere kaliteli kablo montajları ve kablo demetleri sağlayan lider bir İngiliz kablo montaj üreticisi Telecom Connections Limited, en yüksek güvenlik standartlarına uyduklarından emin olma

392

Event

Live Demonstration: Wire Crimp Tensile Testing

Wire crimp tensile testing provides confidence in the integrity and performance of crimped connections, ensuring reliability, safety, and compliance with industry standards.

393

^{[Page extract]}

BS EN 61238-1

Electric connectors, Crimped connectors, Electric cables, Power cables, Electric conductors, Electric wires, Copper, Aluminium, Temperature, Classification systems, Type testing, Short-circuit current tests, Resistance measurement, Mechanical testing, T

394

Case study

Nail Varnish Closure Removal Torque and Capping Check

Requirement Barry M Cosmetics Ltd. are the leading British colour cosmetics brand, offering a comprehensive range of products for face, eyes, lips and nails.

395

Page

You have been subscribed to the Mecmesin newsletter

Thank you

We hope you enjoy the regular updates on our developments in force, materials and torque testing.

396

Case study

Dental abrasive disk integrity

Requirement The resistance to slippage of the eyelet crimp at the centre of a dental abrasive disk is a key measure of the quality of the product.

397

Case study

Press stud popper pull-off test

Requirement The customer was a supplier to major clothing retailer Marks & Spencer, who stipulate that all fasteners and attachments must be tested to failure.

398

Case study