Search results
201
Case study
Syringe plunger breakaway and glide force
Customised engineering example
The majority of syringes are single-use, disposable and manually-operated.
202
Case study
Wine can pop-and-tear opening force
Requirement
The traditional wine connoisseur has seen a packaging evolution in terms of closures; natural corks to synthetic cork materials to Roll-On Tamper-Evident/Pilfer-Proof (ROTE/ROPP) screw caps.
203
Case study
Top-load testing PET bottles
Requirement
Esterform Packaging manufacture more than a million PET bottles and preforms per day for major processors of bottled water, juices, soft drinks, dairy and household products.
204
Case study
Euro coins extraction test
Requirement
The Spanish producer needed to find out the force to extract the inner filler of the 1 and 2 Euro coin from their outer ring.
205
Case study
Syringe pump calibrator
Requirement
Medical device manufacturers, Cardinal Health, supply a range of syringe pump infusion systems to hospitals.
206
Event
VectorPro Software - The ultimate platform for force & materials testing
VectorPro Software: The ultimate platform for force & materials testing
Presenters: Carl Bramley / Moses Da Rocha
207
Case study
Using a UTM as a calibration tool for loadcells
Requirement
When it comes to configuring and calibrating a loadcell in tension and compression this can be a time-consuming process, particularly when the loads concerned are too high to use a set of calibrated weights (also known as ‘masses’)
208
Case study
Top-load Testing of Plant-based PLA Material Bottles
Requirement
BioPak Solutions in Roquefort-les-Pins, France, are leaders in the production of Polylactic Acid (PLA) bottles. The bottles are oil-free, contain no PET or Bisphenol A, and are made 100% from carbon-absorbing plants.
209
Case study
Biopsy injector batch testing of trigger spring strength
Requirement
Bard Limited (a UK division of C R Bard Inc.) services Bard® Magnum® biopsy needle injector guns for clients around the world.
210
[Page extract]
Software-controlled torque systems
Sophisticated power with easy of use
Looking for an automated torque testing system to improve the accuracy and repeatability of your measurements compared to manual torque testers?<
211
Case study
Cooked rice firmness stickiness and adhesiveness
Requirement
The texture of rice is vital to how the consumer perceives the quality of the product. Texture is one of the sensory criteria critical to acceptance.
212
Case study
Cooked rice firmness stickiness and adhesiveness
Requirement
The texture of rice is vital to how the consumer perceives the quality of the product. Texture is one of the sensory criteria critical to acceptance.
213
Accessory
Rotating Crimp Receptacle for CrimpTest-1 kN
432-605
Rotating Crimp Receptacle for CrimpTest-1 Tester (supplied as standard with the Tester)
A versatile crimp termination holder that accommodates a wide range of terminal sizes.
The inner slotted ring rotates to fit up to 10 different-sized crimp…
214
Accessory
U-form Pneumatic Vice Grip - Single Action, 5 kN, Pair, QC-20 fitting
Mec83
MEC 83 (body only) :
A pair of pneumatically-operated, Single-action U-form Vice Grips with a standard opening of 0-10mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manually-adjusted jaw holder + 1 pneumatic piston…
215
Product
Torque wrench calibrator
TWC
875-001
The TWC Torque Wrench Calibrator is is a simple and cost-effective solution for checking the settings on standard 'beam', 'click' and 'break-over' wrenches.
Manually operated and measuring both clockwise and counter-clockwise torque up to 1000 N.m with…
216
Accessory
U-Form Vice Grip - Double Action, 5 kN, 28 mm opening, QC-20 fitting
Mec240g
MEC 240g (body only):
A U-form Vice Grip providing free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
The ‘U-Form’ cut into the aluminium…
217
Accessory
U-Form Vice Grip - Double Action, 5 kN, 28 mm opening, QC-20 fitting
Mec240g
MEC 240g (body only):
A U-form Vice Grip providing free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
The ‘U-Form’ cut into the aluminium…
218
Accessory
Upper Key-operated Chuck, square drive, for use with Vortex sensors
432-444
Upper ‘key-operated’ 4-jaw Chuck (small)
Fitted with a square-drive adapter for connection to 'Vortex' torque sensors. Supplied with dedicated chuck-key and 3 different sets of interchangeable jaws. Max.opening 50mm depending on jaws selected.
Used for…
219
Case study
Syringe testing to ISO 11040-4 Annex C1 flange break resistance
Requirement
The ubiquitous medical syringe is an extremely important device, delivering (parenteral) injectable products to the patient by means of a cylinder and plunger mechanism.
220
Case study
Golf ball deflection test
Requirement
A golf ball manufacturer has factories based in both the US and India.
221
[Page extract]
Types of tear testing machines
Mecmesin offers a complete range of Elmendorf tear testing equipment, from high-precision digital models with advanced data capture capabilities to ro
222
[Page extract]
Universal testing machines
Our universal testing machines (UTM) are capable of performing a range of tests, including tensile and compression tests, following international and industry-specific standards.
223
[Page extract]
Mechanical force gauges
Mechanical force gauges are spring-based instruments which feature a needle on a dial. They are entry-level push-pull gauges not requiring batteries so are intrinsically safe to use in hazardous environments.
224
[Page extract]
Force systems
Do you need a level of accuracy and repeatability which just cannot be achieved by manual testers?
225
Case study
Pen injector training aid testing
Requirement
Crux Product Design is an innovative design agency which sees products through from a creative idea to production reality.