Search results
1276
Event
Webinar: Essentials of Grip & Fixture Selection in Force & Torque Testing
For a test to work, the test system needs to properly interface with its specimen.
1277
Event
Tensile Testing for Wiring Harness Connections
The only way of really knowing the strength of a crimped terminal is to pull it. This can reveal production problems, where strand nicks, incorrect crimp height, or effects from changes in terminal supply, may not be clearly apparent.
1278
[Page extract]
How the strip method works
The strip method involves cutting a specimen to a precise width, typically 50 mm or 25 mm depending on the applicable standard, and mounting it in the grips of a tensile testing
1279
Case study
Pork pie penetration test
Requirement
Vale of Mowbray have been baking pork pies since 1928.
1280
Case study
Box crush test (BCT) and transit packaging compression testing
Customised engineering example
Boxes for the consumer and transit packaging industries must be as light as possible whilst still retaining a robustness to contain and protect their contents and also have the strength to stand up to shipping, ha
1281
[Page extract]
Introduction to Delft tear testing
The Delft tear test is a specialised method for determining the tear strength of vulcanised rubber, thermoplastic elastomers and similar flexible materials.
1282
[Page extract]
Compression testing standards
Following recognised standards ensures test data is reliable and comparable. Standards specify specimen preparation, testing speeds, calculations and reporting methods.
1283
Case study
Adjustable spectacles torque test
Customised engineering example
Adlens manufacture adaptive spectacle lenses, where the optical power is adjusted by a side dial which is then removed.
1284
[Page extract]
Comparative analysis with other peel tests
Test type
Peel angle
Common applications
Advantages
1285
Event
Tensile Testing for Wiring Harness Connections
The only way of really knowing the strength of a crimped terminal is to pull it. This can reveal production problems, where strand nicks, incorrect crimp height, or effects from changes in terminal supply, may not be clearly apparent.
1286
Case study
Cable duct strength testing
Customised engineering example
Our customer manufactures tubes and ducts for routing of cables and optical fibres. Installation of these uses blowing, pushing and pulling techniques.
1287
Case study
Semi-automated penetration testing into plasterboard
Customised engineering example
British Gypsum (now Saint-Gobain) carry out repetitive penetration tests to accurately assess the performance and durability of their products.
1288
[Page extract]
Types of calculations handled
Mecmesin’s VectorPro software supports a wide range of test calculations, automatically derived from mechanical testing data:
1289
[Page extract]
ASTM D5868-01
Due to the increased use of adhesively-bonded FRP as a result of the inherent advantages afforded by bonded rather than mechanically-fastened joints (particularly the alleviation of stress risers and stress cracking), there is a need for tests by which
1290
Case study
Engine fuel pump spring characteristics measurement
Requirement
One of the largest automotive parts manufacturers in the Czech Republic, part of a major group, required a number of its component parts tested under high loads.
1291
[Page extract]
Importance of ergonomic strength testing
Ergonomic strength testing is essential for ensuring that human performance matches task requirements. This alignment reduces the risk of musculoskeletal injuries and improves long-term health outcomes.
1292
[Page extract]
Applications of the peel wheel test
The peel wheel test is relevant to industries where adhesion performance is critical to product function, safety, or durability.
1293
[Page extract]
Gels and hydrocolloids
Gels and hydrocolloids such as agar, gelatin, xanthan and guar gum, etc. are widely used in the food, cosmetics/personal care, and medical/pharmaceutical industries.
1294
[Page extract]
Manual controls and switches
Switches come in many different configurations... toggle, rotary, mercury, push-button, reversing, relay and circuit breaker.
1295
Event
The fundamentals of torque testing
If you have every struggled to open your favorite bottle of water or jam, or required help loosening the lug nuts on your car's wheels, it's likely due to a case of over-torque.
1296
Case study
Glued cardboard packaging integrity
Requirement
Graphic Packaging International is a leading designer and manufacturer of food and beverage packaging.
1297
[Page extract]
Example: Cork extraction testing for bottling efficiency
Designed for high-volume bottling plants, the automated tester measures the extraction force and weight of 75 corks from each production batch.
1298
Case study
Torque testing closures on multi-way plastic bottles
Customised engineering example
A pharmaceuticals company wanted to test the closure torque of a series of square-profile PET bottles.
1299
Software
エンペラーフォースソフトウェア
Emperor™ Force ソフトウェアニーズに合わせて張力テストと圧縮テストを設計およびカスタマイズできる、ほぼ無制限の自由度を備えた使いやすいソフトウェアです。Mecmesin がお客様と緊密に協力して開発した Emperor™ は、現在 5,000 社を超える企業から製品の詳細なテストと評価に信頼されています。生産ライン用の簡単なテストと、設計基準が満たされていることを証明するためのより複雑な実験室テストを作成します。皇帝について
1300
Case study
トップロードテストPETボトル
要件Esterform Packagingは、ボトル入り飲料水、ジュース、ソフトドリンク、乳製品、家庭用品の主要な加工業者向けに、1日あたり100万本以上のPETボトルとプリフォームを製造しています。生産中、Esterformは、会社の厳格な品質基準に沿って、PETボトルの軸方向の耐荷重を評価できる必要があります。これは、充填やキャッピング中、または輸送や保管のために積み重ねたときにボトルが座屈しないようにするための重要な要素です。