Search results
2051
Event
Tensile Testing: Extension, Elongation, Force & Failure
The primary objective for measuring and analyzing the the tensile force value of a product is to accurately determine one or more of these factors:
2052
[Page extract]
ASTM D1894
This test method is used to measure the friction of plastic film and sheeting. It determines the kinetic (moving) and static (starting) resistance of one surface being dragged across another.
2053
[Page extract]
Jaws
Choosing the most appropriate jaw type for a tensile grip can be tricky. It is a balance between having sufficient hold of the specimen to prevent it slipping and not having too ‘aggressive’ a hold which damages the specimen.
2054
Case study
Integrità del disco abrasivo dentale
Requisiti La resistenza allo scivolamento della crimpatura dell'occhiello al centro di un disco abrasivo dentale è una misura chiave della qualità del prodotto.
2055
Case study
Sicurezza dei bambini: forza per estrarre l'accendino
Requisiti
Il cliente produce accendini e sta attualmente sviluppando una custodia / protezione progettata per aumentare la sicurezza dei bambini.
2056
Case study
Prova di resistenza alla trazione della rete da pesca secondo ISO1806
Requisiti Le reti da pesca sono uno degli strumenti chiave nella pesca commerciale e sono disponibili molti tipi di attrezzi per reti attive e passive.
2057
[Page extract]
Analisi di massa
Nei settori in cui le polveri, i granuli o i materiali pellettizzati vengono formulati, lavorati o confezionati, è essenziale mantenere l'unifor
2058
Software
Software Emperor Torque
Software Emperor™ Torque
Un software facile da usare, con una libertà quasi illimitata di progettare e personalizzare le prove di coppia in base alle proprie esigenze. Sviluppato da Mecmesin in stretta collaborazione con i nostri clienti, Emperor™ è oggi…
2059
Case study
Coppia dei giunti del microfono delle cuffie
Requisiti Jabra è una filiale di GN Netcom ed è un produttore globale di soluzioni innovative per cuffie (wireless e cablate) e vivavoce.
2060
Case study
Test batch di iniettori per biopsia della forza della molla del grilletto
Requisiti Bard Limited (una divisione britannica di CR Bard Inc.) fornisce assistenza agli iniettore di aghi per biopsia Bard® Magnum® per clienti in tutto il mondo.
2061
[Page extract]
Sistemi di forza controllati da software
Potenza sofisticata facile da usare I tester di trazione semi-automatici migliorano l'accuratezza e la ripetibilità delle misurazioni rispetto ai misuratori di forza manuali.
2062
Sensor
Sensori - tester dei materiali
sensori I sistemi di prova dei materiali OmniTest e MultiTest-dV utilizzano la gamma di sensori di carico avanzati (ELS) di precisione ad alta risoluzione di Mecmesin per registrare carichi di trazione e compressione. ELS Una cella di carico di…
2063
Accessory
Compression Plate - Hardened Steel, 50 kN, 116 mm, QC-32 fitting
Mec23-116-32-St
MEC23-116-32-St :
Round compression plate in hardened steel featuring concentric circles for helping operators to place samples centrally. Suitable for hard specimens such as metals, hard plastics, small stones and granules.
116mm diameter.
Fitted…
2064
Accessory
Compression Plate - Hardened Steel, 25 kN, 246 mm, QC-20 fitting
Mec23-246-20-St
MEC23-246-20-St :
Round compression plate in hardened steel featuring concentric circles for helping operators to place samples centrally. Suitable for hard specimens such as metals, hard plastics, small stones and granules.
246mm diameter.
Fitted…
2065
Accessory
Flip Cap Accessory, 100 N, 10-32 UNF
432-419
The Flip Cap Accessory is designed to easily fit under flip caps to test their opening force.
It is fitted with a 10-32 UNF female thread and supplied with a male grub-screw for easy connection to a loadcell or force gauge.
2066
Accessory
Rubber jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 50 mm
Mec240k-BG50
Rubber-faced Jaws (30mm x 50mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = see datasheet for various spans according to the grip body selected.
For fragile samples, which may get weakened by pinching at the contact-…
2067
Accessory
Rubber jaws for Mec227 Lightweight Vice Grip, 100 N, 10 x 25mm
Mec227-BG25
Rubber-faced Jaws (10mm x 25mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0 - 6mm.
For fragile samples, which may get weakened by pinching at the contact-edge of the grip. (e.g. thin films, filaments, fibres and…
2068
Accessory
Square Perforated Aluminium Compression Plate, 150 x 150 mm, QC-20 or QC-32 fitting
Mec36L-150-L6x20
MEC36L-150-L6x20
Square Compression Plate in aluminium featuring perforations to allow air release during testing - suitable for foam testing. Holes are 6mm diameter and spaced at 20mm intervals.
Dimensions: 150mm x 150mm
Fitted with QC-20mm or 32mm…
2069
Accessory
Rubber jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 50 mm
Mec240k-BG50
Rubber-faced Jaws (30mm x 50mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = see datasheet for various spans according to the grip body selected.
For fragile samples, which may get weakened by pinching at the contact-…
2070
Accessory
Rubber coated jaws for Mec154 Heavy-duty Vice Grip, 20kN, 40 x 100 mm
Mec154-BG100
Rubber-faced Jaws (40mm high x 100mm wide) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0 - 28 mm.
For specimens, which may get weakened by pinching at the contact-edge of the grip. (e.g. films, filaments, fibres and…
2071
Accessory
FINAT 9 Loop-Tack Test Fixture (lower), 200 N, QC-20
PDV13016-A
The FINAT 9 Loop Tack Test Fixture (lower) is fitted to the anvil plate of a motorised test stand.
It comprises a dedicated holder for 25mm x 75mm float glass onto which the adhesive-coated test strip is fixed according to the requirements of the FINAT…
2072
Accessory
Square Perforated Aluminium Compression Plate, 400 x 400 mm, QC-20 or QC-32 fitting
Mec36L-400-L6x20
MEC36L-400-L6x20
Square Compression Plate in aluminium featuring perforations to allow air release during testing - suitable for foam testing. Holes are 6mm diameter and spaced at 20mm intervals.
Dimensions: 400mm x 400mm.
Fitted with QC-20mm or 32mm…
2073
Accessory
QC Type A Adapter, 20 mm M to 5-16 UNC F, c/w pin
432-282
Quick-Change Male Post to Thread Adapter
Fixes directly to the 5-16 UNC screw in anvil plate of test stands or to the 5-16 UNC extension rod connected to loadcells…
2074
Accessory
Adapter, 5 kN, 5-16 UNC to M10, M to M
432-333
Male-to-male Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
2075
Accessory
432-662-1.0 Gold torque reference bottle 1.0 N.m
432-662-1.0
The Torque Reference Bottle (also known as ' Gold Bottle') provides a means of quickly verifying the calibration of motorised torque measuring systems Helixa and Vortex. Its magnetic clutch repeatedly slips at a factory-set, specified torque value. The…