Search results
426
Accessory
QC Type J, lightweight adapter, Ø 20 mm M to 10-32 UNF F c/w pin
432-418
Quick-Change Male Post to Thread Adapter (lightweight)
Fixes directly to the 10-32 UNF screw in anvil plate of test stands or to the 10-32 UNF extension rod connected to loadcells…
427
Accessory
Eccentric Roller Grip - Pyramid (serrated) roller, 10 kN, QC-20 fitting
Mec7-10
MEC7-10 Eccentric Cam Grip
Fitted with a pyramid-faced serrated 60mm wide roller cam. As a load is applied to a specimen the cam self-tightens , spreading the load evenly.
The lever allows for quick insertion and release of specimen to reduce testing…
428
Accessory
3- & 4-point Bend Jig, 2.5 kN, Aluminium, QC-20 fitting
Mec238
MEC238 - A small yet fully-configurable 2.5 kN Bend Jig in aluminium.
The main support beam has a bending span up to 150 mm and can bear a wide selection of interchangeable single-roller or dual-roller anvils to suit your specimen material.
A single…
429
Accessory
3-Point Bend Jig, 1 kN, Aluminium, T-slot base
432-248
A lightweight 3-point Bend Jig with 60 mm high upper and lower anvils of 1.5mm radius. Has a support span up to 120 mm.
Ideal for most low-force bending and snapping applications.
For use with T-slot base plate (432-294) - sold separately - to fit…
430
Accessory
Cone Point - 12 mm diameter, 5 kN, 5-16 UNC
432-359
A Cone Point probe of Ø 12.7 mm with angle of 60°.
For compression testing of various components or materials up to 5 kN.
Typically used where compressive force needs to be applied at a point or for penetration into a material over a short distance.…
431
Accessory
Wedge Grip, 10 kN, QC-20 fitting
MecS622
MecS622 (body only) :
Lever-action wedge grip with it's lever being positioned at the front for easy operation.
The open back of this wedge grip allows wider samples to be fitted, although still held across the central 34 mm width.
Supplied as body…
432
Accessory
Wedge Grip, 10 kN, QC-20 fitting
MecS622
MecS622 (body only) :
Lever-action wedge grip with it's lever being positioned at the front for easy operation.
The open back of this wedge grip allows wider samples to be fitted, although still held across the central 34 mm width.
Supplied as body…
433
Accessory
Eccentric Roller Grip - pyramid (serrated) roller, 1 kN, QC-20 fitting
Mec7-1
MEC7-1 Eccentric Cam Grip
Fitted with a pyramid-faced serrated 50mm wide roller cam. As a load is applied to a specimen the cam self-tightens , spreading the load evenly.
The lever allows for quick insertion and release of specimen to reduce testing…
434
[Page extract]
Systèmes d'essais de mesure de force
Avez-vous besoin d'un niveau de précision et de répétabilité impossible à atteindre par les bancs d'essais manuels?
435
Accessory
Eccentric Roller Grip - Pyramid (serrated) roller, 10 kN, QC-20 fitting
Mec7-10
MEC7-10 Eccentric Cam Grip
Fitted with a pyramid-faced serrated 60mm wide roller cam. As a load is applied to a specimen the cam self-tightens , spreading the load evenly.
The lever allows for quick insertion and release of specimen to reduce testing…
436
Accessory
Cone Point - 8 mm diameter, 500 N, 10-32 UNF
432-358
A Cone Point probe of Ø 8mm with angle of 60°.
For compression testing of various components or materials up to 500 N.
Typically used where compressive force needs to be applied at a point or for penetration into a material over a short distance.…
437
Accessory
Spring-action Vice Clamp, 200 N, 10-32 UNF
432-381
Spring-action Vice Clamp is fitted with adjustable serrated interlocking jaws to effectively grip specimens for tensile testing up to 200 N.
Ideal for gripping up to 16mm wide strips of film, paper, labels, tape and other thin materials for tensile and…
438
Accessory
3- & 4-point Bend Jig, 2.5 kN, Aluminium, QC-20 fitting
Mec238
MEC238 - A small yet fully-configurable 2.5 kN Bend Jig in aluminium.
The main support beam has a bending span up to 150 mm and can bear a wide selection of interchangeable single-roller or dual-roller anvils to suit your specimen material.
A single…
439
Accessory
Eccentric Roller Grip - pyramid (serrated) roller, 1 kN, QC-20 fitting
Mec7-1
MEC7-1 Eccentric Cam Grip
Fitted with a pyramid-faced serrated 50mm wide roller cam. As a load is applied to a specimen the cam self-tightens , spreading the load evenly.
The lever allows for quick insertion and release of specimen to reduce testing…
440
Accessory
3- & 4-point Bend Jig, 50 kN, Aluminium, QC-32 fitting
Mec22-360
MEC22 - A fully-configurable 50 kN Bend Jig in aluminium.
The main support beam has a bending span up to 330 mm and can bear a wide selection of interchangeable single-roller or dual-roller anvils to suit your specimen material.
A single upper anvil…
441
Event
Compressive Crush Force Testing
This webinar will focus on identifying and troubleshooting variables that impact compressive force testing, setting up repeatable compression force tests and establishing consistent testing standards for your products.
442
Accessory
Mitutoyo DP-1VA Series 264-Digimatic Mini-Processor (US)
432-206
A palm-sized printer manufactured by Mitutoyo. It is used to print measurement data from the digimatic signal of digital force and torque instruments.
Performs statistical analysis and can draw a histogram or D chart in addition to more complicated…
443
Accessory
3- & 4-point Bend Jig, 50 kN, Aluminium, QC-32 fitting
Mec22-360
MEC22 - A fully-configurable 50 kN Bend Jig in aluminium.
The main support beam has a bending span up to 330 mm and can bear a wide selection of interchangeable single-roller or dual-roller anvils to suit your specimen material.
A single upper anvil…
444
Accessory
Wire Grip, 500 N, 10-32 UNF
432-397
The Wire Grip is designed for tensile testing up to 500 N of flexible thin wires, which may break easily when clamped.
The specimen is wrapped around a grooved 19 mm diameter bollard and the free end is clamped tightly in place using a pair of friction…
445
Accessory
Large Double-action Vice Grip, 5 kN, QC-20 fitting
432-433
The Large Double-action Vice Grip provides free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
It has a Tommy-bar handle on one side for rapid…
446
Accessory
Cork Extraction Test Rig
432-676
The Cork Extraction Test Rig is used to test the extraction force of corks and other bottle stoppers.
The lower part of the fixtures fits to the base of a test stand. It has a bottle cradle with an anti-slip surface and is easily adjusted to accommodate…
447
Accessory
Mitutoyo DP-1VA Series 264-Digimatic Mini-Processor (Euro)
432-205
A palm-sized printer manufactured by Mitutoyo. It is used to print measurement data from the digimatic signal of digital force and torque instruments.
Performs statistical analysis and can draw a histogram or D chart in addition to more complicated…
448
Accessory
3- & 4-point Bend Jig, 50 kN, Steel, QC-32 fitting
Mec103-cgr
MEC103 - A compact yet fully-configurable 50 kN Bend Jig in steel.
The main support beam attaches to the base of the test frame and has a bending span up to 120 mm. It can accept a wide selection of interchangeable single-roller or dual-roller anvils to…
449
Accessory
Filament Grip, 250 N, 10-32 UNF
432-363
The Filament Grip is designed for tensile testing up to 250 N of delicate, flexible specimens such as threads and yarns, which may break easily when clamped.
The specimen is wrapped around a grooved 13mm diameter bollard and the free end is clamped…
450
[Page extract]
How is compression texture testing performed?
Test methods and parameters
A typical test places the sample on a stable platform beneath a compression plate or probe.