Search results
2301
Sensor
Sensors - Helixa
Torque sensors
The HTC range of interchangeable torque sensors are specially adapted for the Helixa test system. Plug and play for automatic calibration with availability to suit all requirements in capacities from 0.1 N.m (0.9 lbf.in) to 6 N.m (50 lbf.in…
2302
[Page extract]
ISO 15359
This International Standard specifies, a friction-testing method based on the horizontal plane principle, and the procedure for the determination of the static coefficient of friction before, and static and kinetic coefficients of friction after, a spec
2303
[Page extract]
Compression
Compression tests are performed to evaluate the performance of a material or component under gradually increasing compressive load.
2304
Caso de estudio
Porta botella de bebida de cartón desplegable
Ejemplo de ingeniería personalizada Un fabricante de cajas de cartón completamente cerradas quería probar la calidad de la fuerza desplegable para una variedad de sus diseños, utilizados principalmente para envasar botellas y latas de bebidas
2305
[Page extract]
BS EN 2243-2
This standard defines the general requirements for the determination of strength of structural adhesives by testing in peel metal to metal joints, at ambient or other temperatures.
2306
Caso de estudio
Prueba de torque helicoidal de resorte de torsión
Requisito Los componentes con resorte se usan ampliamente en artículos para el hogar y el consumidor: pinzas para la ropa, clips y ratoneras anticuadas; pequeñas puertas y solapas en cámaras o equipos de alta fidelidad; Puertas y cierres gran
2308
Caso de estudio
Resistencia a la rotura de la herramienta de corte y afilado de diamante
Requisito Las herramientas de diamante que permiten un procesamiento de alta precisión y alta calidad se utilizan en diversas industrias, incluida la automotriz, informática y electrónica.
2309
[Page extract]
Tipo de prueba
Mecmesin proporciona soluciones para pruebas en productos o materiales que requieren la medición de su resistencia física. Por lo general, esto implica aplicar y registrar la fuerza para separar, empujar, girar o girar.
2310
[Page extract]
ASTM D5321-12
This test method covers a procedure for determining the shear resistance of a geosynthetic against soil, or a geosynthetic against another geosynthetic, under a constant rate of deformation.
2311
[Page extract]
ISO 9727-4
ISO 9727-4 specifies a test method for determining the percentage of diameter recovery of cylindrical cork stoppers, after compression.
2312
[Page extract]
PD CEN/TR 17394-3
This document defines a test method for security of attachment of functional and decorative metal mechanically applied press fasteners to children's clothing including for example gloves, hats, scarves, hosiery, ties, and textile belts.
2313
[Page extract]
ASTM D7249-12
This test method covers determination of facing properties of flat sandwich constructions subjected to flexure in such a manner that the applied moments produce curvature of the sandwich facing planes and result in compressive and tensile forces in the
2314
[Page extract]
ASTM D3472
This test method covers the measurement of the torque developed when Type IA child-resistant closures are rotated in the counter-clockwise direction.
2315
Caso de estudio
Prueba de extracción de aguja a férula
Requisito El cliente, Oxford Instruments, deseaba realizar una prueba de extracción destructiva para evaluar la fuerza de tensión máxima para separar los 2 componentes.
2316
[Page extract]
ISO 9311-2
Specifies a method for the determination of the shear strength of joints made with adhesives for thermoplastic piping systems.
2317
[Page extract]
ASTM F904
ASTM F904 is a test method that covers a procedure for comparing the bond strength or ply adhesion of similar laminates made from flexible materials such as cellulose, paper, plastic film, and foil.
2318
Caso de estudio
Validación de par de cierre
Requisito El cliente tenía varios probadores de par de cierre Tornado y deseaba realizar verificaciones de validación periódicas sin la necesidad de devolver las unidades a Mecmesin o a un laboratorio aprobado.
2319
Caso de estudio
Prueba de terminal de arnés eléctrico
Requisito Cyprium Motorsports, con sede en Diss, Reino Unido, diseña y produce sistemas de mazos de cables personalizados para automóviles deportivos, incluidos Fórmula 1, Le Mans Prototype, Grand Touring y autos de rally.
2320
[Page extract]
ISO 527-3
ISO 527-3 specifies the conditions for determining the tensile properties of plastic films or sheets less than 1 mm thick, based upon the general principles given in ISO 527-1.
2321
[Page extract]
ASTM D5528-13
ASTM D5528 is a test method, which determines the opening Mode I interlaminar fracture toughness of continuous fiber-reinforced composite materials. It uses a a double cantilever beam (DCB) specimen. Susceptibility to delamination is one of the major
2322
Caso de estudio
Prueba de resistencia a la rotura del cable de guía médica
Requisito La compañía es fabricante de dispositivos y componentes médicos formados con alambre, utilizados dentro de dispositivos mínimamente invasivos para aplicaciones cardiovasculares, endo y neurovasculares.
2323
Caso de estudio
Ensayo de jeringas según la norma ISO 11040-4, anexo G6, fuerza de extracción del protector de la aguja
Requisito
La omnipresente jeringa médica es un dispositivo extremadamente importante, que suministra productos inyectables (parenterales) al paciente mediante un mecanismo de cilindro y émbolo.
2324
[Page extract]
ASTM D6641 / D6641M - 16e1
The ASTM D6641 test method determines compressive properties of polymer composite materials by applying combined end-loading and shear-loading using a combined loading compression (CLC) fixture.
2325
[Page extract]
BS 2782-3: 360C
BS 2782-3: Method 360C specifies a test method for testing the tear resistance of plastics film and sheeting by the initiation method