用于食品和饮料行业的Mecmesin解决方案。

我们生活在一个世界上,大多数食品和饮料都预先包装在可以保护的包装中,但设计起来很容易打开。

一次性包装的数量巨大以及环境法规的增长为以最小的浪费和费用生产这种包装带来了压力,同时仍要确保其适合用途。在这里,必须对食品和饮料包装进行物理测试,以确保客户体验良好:

  • 消费食品包装需要剥离,因此必须设计和检查“最大密封和最小剥离”。
  • 蒸煮袋要求消费者克服撕裂前的穿孔,同时承受穿刺力以保护内容物。
  • 塑料饮料瓶需要使用最少的原材料,但仍然能够承受填充和堆叠过程中施加的力,因此需要测试其最大负载强度。
  • 拧开饮料盖或瓶盖本身可能是一个挑战,特别是对于老年人。在设计和生产周期中进行扭矩测试对于确保可用性和确保良好包装不会损害品牌形象至关重要。
  • 喷雾罐需要正确的手指压力才能激活气雾剂。环形拉环必须提供牢固的密封,但不要用力过大,以免弄伤指甲或割伤手指。

应用范围几乎是无止境的,包装本身变得越美观,越难抓握和测试。

在Mecmesin,我们设计了力和扭矩测量系统以及用于测试各种包装产品的固定装置,因此您可以在设计和生产现场采用行业标准的测试方法进行质量控制。

我们的Emperor控制和分析软件功能强大且灵活,只需按一下按钮即可进行可靠,准确,可重复的测试。

测试您自己的公司标准以及ASTM,BS EN,ISO,DIN,CEN,Afera,FEFCO,FINAT,PSTC,TAPPI和TLMI

如果您需要用于食品本身的质地分析的解决方案,请访问我们的姊妹公司Food Technology Corporation(FTC) ,该公司在质地分析仪,质地压榨机和压度计的设计和制造方面拥有40多年的经验。

Standards

Silgan Plastics has utilised the Mecmesin tester in several of our plants over the last two years to monitor top-load. It brings a wealth of features at a very competitive price. We pride ourselves on being the forefront of container performance and capability and the 5-x top-load tester is a valued piece of our strategy.

Randy Blankenship, Quality Engineer
Silgan Plastics

Case study
Top-load plastic bottle testing systems in factory conditions and QC lab
"Mecmesin, through their Portuguese supplier Egitron, presented us with a good solution: reliable equipment and user-friendliness that was adequate for our needs. All our operators are capable of using this equipment because it is very simple to operate. I enjoy dealing with Egitron because they offer excellent technical support."

Miguel Carvalho, Quality Assurance Manager
Água de Luso

Case study
Application torque is checked by removal torque measurement with short dwell times
The MultiTest 0.5-i is a very good and reliable machine and the Emperor™ Software brings great advantages. It’s a very useful tool for these kinds of tests. It’s fully programmable and offers an in-depth analysis of results. It’s a precious tool for everybody involved, especially those who work with plastics and their mechanical performance.

Nikos Michopoulos, Quality Control
Eurofilm Mantzaris S.A.

Case study
Polythene packaging material specimen under test and specific film grips
"Mecmesin were able to offer us a texture analyser test system, which met with our testing needs. The range of probes supplied have been extremely useful, as it enables more variations of test to be performed with just the one system. This has been very useful as our product has 3 different component ingredients, which can be individually analysed using their dedicated test cells provided."

Liberty Horner, Food Technologist
Vale of Mowbray

Case study
Pork pie texture testing by penetration with probe accessories
Mecmesin were extremely helpful when we were looking to purchase new test equipment, this included demonstrations. Our equipment is calibrated annually by Mecmesin and I find their after-sales service to be exceptional.

Darren Pell,
Par-pak Europe Ltd

Case study
Serrated 2-way plane grips firmly grasp tray and lid elements

After an Internet search, I happened upon Mecmesin, a British company who were able to provide several cost-effective solutions. We finally settled on the Tornado model, which we felt would provide us with consistency and ease of use, as well as being compact and portable.

We have been using it now for a few months and are very pleased with it and the level of service provided by the helpful Mecmesin staff.

Jane Green, Quality Assurance Manager
Brothers Drinks Co Ltd

Case study
Second torque peak reading indicates tamper bridge event
The new xt system is simple and tough enough for us to use in a production environment, while simultaneously allowing us to get the information we need. Being a complete system has made integrating it into our Quality Assurance system straight forward. The information we receive allows us to preempt issues before they can affect quality, with much less effort than previously. This means we have less waste, improved efficiencies and can spend more time making our products.

William Thorley, Project Engineer
Reckitt Benckiser PLC

Case study
Cosmetics packaging burst strength quality control testing on the production line
As a responsible supplier, we are committed to ensuring safety within our products. The solution provided by Mecmesin means we can monitor the extraction force of our corks to guarantee our customers receive a consistent end product.

Frédéric Junge, Quality manager
Sibel (Oeneo)

Case study
Hand-held cork extraction tester with cork and bottle
Companies show their worth when presented with a unique problem to solve. Be assured, I will have no hesitation in recommending Mecmesin to friends and business colleagues.

Dale Baker, CI Manager
Graphic Packaging International, UK

Case study
Cardboard packaging unfolding test fixturing
The Mecmesin MultiTest 1-x enables us to ensure the consistently high manufacturing quality of our PET bottles. The system conveniently allows us to perform top-load testing and confirm free height and integrates easily with our data collection system, increasing our analytical efficiency. I would have no hesitation in recommending this first rate instrument.

John Gilroy, Quality Manager
Esterform Packaging Ltd

Case study
MultiTest-dV compression tester and close-up of top-load crush test with a vented plate fixture

与专家交谈

对产品有疑问吗?立即请求我们的一名技术销售工程师回电。