Search results
601
Accessory
Cone Point - 8 mm diameter, 500 N, 10-32 UNF
432-358
A Cone Point probe of Ø 8mm with angle of 60°.
For compression testing of various components or materials up to 500 N.
Typically used where compressive force needs to be applied at a point or for penetration into a material over a short distance.…
602
Accessory
FINAT 9 Loop-Tack Test Fixture (lower), 200 N, QC-20
PDV13016-A
The FINAT 9 Loop Tack Test Fixture (lower) is fitted to the anvil plate of a motorised test stand.
It comprises a dedicated holder for 25mm x 30mm float glass onto which the adhesive-coated test strip is fixed according to the requirements of the FINAT…
603
Accessory
Compression Plate, Self-levelling, Hardened & Ground, 70 mm, 5-16 UNC
432-350
Self-levelling compression plates are ideal for general compression testing on a range of materials and finished products. Self-levelling allows parallelism to be set for those applications where it is critical to accurately measure the deformation of a…
604
Accessory
Wedge Grip, 10 kN, QC-20 fitting
MecS622
MecS622 (body only) :
Lever-action wedge grip with it's lever being positioned at the front for easy operation.
The open back of this wedge grip allows wider samples to be fitted, although still held across the central 34 mm width.
Supplied as body…
605
Accessory
Cable Cam Grip (smooth), 1 kN, 10-32 UNF
432-404
Cable Cam Grip - smooth, small
Designed for holding insulated cables and wire. The specimen is secured by the cam, which self-tightens as load is applied and spreads the load evenly.
Smooth cams are preferable for materials where a serrated cam may bite…
606
Accessory
Wedge Grip, 10 kN, QC-20 fitting
MecS622
MecS622 (body only) :
Lever-action wedge grip with it's lever being positioned at the front for easy operation.
The open back of this wedge grip allows wider samples to be fitted, although still held across the central 34 mm width.
Supplied as body…
607
Accessory
Compression Plate, Self-levelling, Hardened & Ground, 50 mm, 10-32 UNF
432-349
Self-levelling compression plates are ideal for general compression testing on a range of materials and finished products. Self-levelling allows parallelism to be set for those applications where it is critical to accurately measure the deformation of a…
608
Event
Medical Devices – Syringe & Needle Testing Fundamentals
Vial sealing is a critical step in the process of ‘fill and finish’ operations for vaccines and medications, as it defines the seal quality of the final product, ensuring sterility and preventing leakage.
609
Accessory
Cork Extraction Test Rig
432-676
The Cork Extraction Test Rig is used to test the extraction force of corks and other bottle stoppers.
The lower part of the fixtures fits to the base of a test stand. It has a bottle cradle with an anti-slip surface and is easily adjusted to accommodate…
610
Accessory
Wedge Grip (large), 5 kN, 5-16 UNC
432-398
The 5 kN Wedge Grip is ideal for tensile testing of flat and rigid materials, including plastics, rubber and light metals.
A spring-loaded lever ensures the serrated jaws (25mm wide x 32mm high) are easy to open for fast securing and release of samples…
611
Accessory
Puncture Test Fixture to EN ISO 14477, 500N, QC-20 fitting
MecS511
This EN ISO 14477 Puncture Test Fixture is for testing resistance strength in flexible packaging materials.
The specimen is clamped in the lower specimen holder, which is connected to the base plate of the test stand via a QC-20 female hole.
An upper '…
612
Accessory
Mitutoyo DP-1VA Series 264-Digimatic Mini-Processor (US)
432-206
A palm-sized printer manufactured by Mitutoyo. It is used to print measurement data from the digimatic signal of digital force and torque instruments.
Performs statistical analysis and can draw a histogram or D chart in addition to more complicated…
613
Accessory
Small Single-action Vice Grip, 200 N, QC-20 fitting
432-264
A general-purpose Single-action Vice Grip.
Ideal for testing low force flat specimens. The open side design facilitates easy loading of thin, non-rigid samples, which are clamped in place.
Fitted with 30 mm x 30 mm flat-faced jaws and rated to 200 N in…
614
Accessory
Puncture Test Fixture to EN ISO 14477, 500N, QC-20 fitting
MecS511
This EN ISO 14477 Puncture Test Fixture is for testing resistance strength in flexible packaging materials.
The specimen is clamped in the lower specimen holder, which is connected to the base plate of the test stand via a QC-20 female hole.
An upper '…
615
Accessory
Eccentric Roller Grip - Pyramid (serrated) roller, 10 kN, QC-20 fitting
Mec7-10
MEC7-10 Eccentric Cam Grip
Fitted with a pyramid-faced serrated 60mm wide roller cam. As a load is applied to a specimen the cam self-tightens , spreading the load evenly.
The lever allows for quick insertion and release of specimen to reduce testing…
616
Software
Software Força Imperador
Software Emperor™ Force Software fácil de usar com liberdade quase ilimitada para projetar e personalizar testes de tensão e compressão para atender às suas necessidades. Desenvolvido pela Mecmesin em colaboração próxima com nossos clientes, o Emperor™…
617
[Page extract]
How is compression texture testing performed?
Test methods and parameters
A typical test places the sample on a stable platform beneath a compression plate or probe.
618
Case study
Teste de tensão de fechamento esportivo ISBT
Requerimento A International Society of Beverage Technologists (ISBT) publica códigos de prática voluntários para os aspectos técnicos e científicos de refrigerantes e bebidas.
619
[Page extract]
ASTM D4917-90
1.1 This test method describes a horizontal plane procedure for the determination of the coefficient of static and kinetic friction of paper measured when sliding against itself.
620
[Page extract]
Why Mecmesin for puncture and shear testing
Mecmesin offers testing systems for puncture and shear applications across films, fabrics, and boards. Our solutions are engineered for accuracy, repeatability, and compliance with international standards.
621
[Page extract]
Why Mecmesin for ring crush testing
Mecmesin designs and manufactures precision testing systems that meet ISO 12192 and TAPPI requirements for RCT.
622
[Page extract]
Why Mecmesin for penetration and puncture resistance testing
Mecmesin designs and manufactures test systems that comply with ASTM, ISO, and BS standards for penetration and puncture resistance te
623
Case study
Abrasion and micro-scratch testing of wood and laminate surfaces
Requirement
The use of natural materials has long been a unique selling point across many consumer product lines.
624
Case study
Teste de força de componentes e acessórios do relógio
Requerimento A hora exibida em nossos telefones celulares e outros dispositivos digitais sempre será mais precisa do que a hora exibida até mesmo no relógio mecânico mais habilmente projetado - então, por que a indústria relojoeira continua a
625
[Page extract]
Standards and guidelines
Accurate and comparable cleavage strength testing depends on following recognised international standards.