Mecmesin | Search results

2451

^{[Page extract]}

ASTM F564-10

This specification covers characterization of the design and mechanical function of metallic staples used in the internal fixation of the muscular skeletal system.

2453

^{[Page extract]}

TAPPI T 841

This method describes procedures for determining the edgewise compressive strength, parallel to the flutes, of a short column of single wall and double wall corrugated fiberboard.

2454

^{[Page extract]}

TAPPI T 825

The flat crush test (1) is a measure of the resistance of the flutes in corrugated board to a crushing force applied perpendicular to the surface of the board under prescribed conditions.

2455

^{[Page extract]}

Claw grips and chucks - designed to either grip a cylindrical test specimen directly, or to grip a thin probe, such as a needle for penetration testing. Often used to help grip irregular shaped objects.

2456

^{[Page extract]}

BS EN 1155

Closing and check mechanisms, Door closers, Electrically-operated devices, Ironmongery (buildings), Classification systems, Design, Performance, Durability, Temperature-rise limit, Test equipment, Sampling methods, Performance testing, Temperature, Elec

2457

^{[Page extract]}

DIN 3419-1

Zip fasteners strength and performance

2458

^{[Page extract]}

BS EN ISO 7389

This International Standard specifies a method for the determination of the elastic recovery of sealants after maintained extension.

2459

^{[Page extract]}

BS EN ISO 6789

Wrenches, Torque, Hand tools, Screwdrivers, Marking, Approval testing, Quality control, Calibration

2460

^{[Page extract]}

*corp 01M-01-217

To determine the maximum force required to rupture (break) a woven fabric.

2461

^{[Page extract]}

ISO 9073-7

Specifies a method for the determination of the bending length of nonwovens. Gives an equation for calculating the flexural rigity of the fabric from the bending length. Does not apply to composites and laminates.

2462

^{[Page extract]}

ASTM F1044-05

This test method covers shear testing of continuous calcium phosphate coatings and metallic coatings adhering to dense metal substrates at ambient temperatures.

2463

^{[Page extract]}

CETIE Guide 3

This guide is for producers of quality sparkling wines who carry out the secondary fermentation process in the bottle, also known as bottle fermentation.

2464

^{[Page extract]}

ISO 9665

Physical property measurement, Chemical analysis and testing, Sampling methods, Specimen preparation, Moisture measurement, Water content determination, Mechanical properties of fluids, Gels, Gelation, Penetration tests, Viscosity measurement, Pipettes,

2465

^{[Page extract]}

Hooks

Hooks - round hooks are suitable for samples with loops, such as some springs, O-rings and seals. Peg hooks can engage smaller attachment holes in thinner and stiffer samples than round hooks.

2466

^{[Page extract]}

ASTM D2534

The coefficient of friction is related to the slip properties of many commercial articles that have been coated with petroleum wax (for example, butter cartons and wax-impregnated or hot melt coated corrugated board).

2467

^{[Page extract]}

*corp Ford DSEU

Test method covering measurement of door slam energy for Ford Chenai, India. Shows Mecmesin loadcell, display and special gripping fixtures. Note: Diagram shows a rigid link bar, which was later replaced by a flexible bungee connection.

2468

^{[Page extract]}

ASTM F1566-09

These test methods cover recognized methods for testing mattress innersprings, boxsprings, and finished mattresses or mattress sets, or both, to ensure uniformity of results.

2469

^{[Page extract]}

Tension

There are in essence two types of tensile grips:

2470

^{[Page extract]}

SAE J 1553

This SAE Recommended Practice describes a cross peel test method for use in measuring the bonding characteristics of automotive-type adhesives for joining fiber-reinforced plastics to themselves and to metals.

2471

^{[Page extract]}

TAPPI T 809

This method describes a procedure for measuring the crushing resistance of a laboratory fluted strip of corrugating medium and provides a means of estimating, in the laboratory, the potential flat crush resistance of a corrugated board.

2472

^{[Page extract]}

BS EN 1125

Ironmongery (buildings), Panic bolts, Bolts (security), Emergency exits, Doors, Fire doors, Safety devices, Closing and check mechanisms, Fire safety in buildings, Means of escape from fire in buildings, Hazard prevention in buildings, Buildings open to

2473

^{[Page extract]}

BS 1881-207

Concretes, Mechanical testing, Surfaces, Field testing, Strength of materials, Testing conditions, Test equipment, Pull-out tests, Penetration tests, Tensile splitting tests, Dimensions.

2474

^{[Page extract]}

BS EN 12430

A compressive point load (of a certain cross-sectional area) is applied to a specimen of thermal insulating product, such as a mineral wool sandwich panel.

2475

^{[Page extract]}

ASTM D6958-03

These test methods describe an evaluation procedure for the determination of undesirable side-bonding of coatings for wood flooring.

Search results

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

시스템

악기

시스템

악기

시스템

악기

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}