Search results
1076
Accessory
V-jaw vice clamp, four jaws on screw-action adjuster, QC-20 fitting
432-678
432-678 is a vice fixture for mounting to the base of a test stand when performing tension and compression tests. It has four jaws, with two jaws being vertically spaced on either side. This provides increased stability by clamping at alternate heights on…
1077
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 20 mm opening, pair, QC-20 fitting
Mec240k-S20+Ko
MEC 240k- S20+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-20mm depending on the jaw types selected. Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic piston.
This…
1078
Accessory
Small Circular Bollard Grip, 100 N, QC-20 fitting
432-270
The Small Circular Bollard Grips is made from aluminium and is designed for tensile testing up to 100 N of delicate, flexible specimens such as fine threads, wires and yarns, which may break easily when clamped.
The specimen is wrapped around the…
1079
Accessory
Upper Torque Fixing Table for Vortex stands
432-321
Upper Torque Fixing Table.
Offers highly versatile holding of specimens when torque testing. Fully adjustable between 10 - 78mm opening to accommodate a variety of forms.
Four rubber-coated, threaded pegs are supplied as standard which screw into…
1080
Accessory
Thin Wire Grip with carrier for inset jaws, 2.5 kN, QC-20 fitting
Mec9
MEC9 Thin Wire Grip
Designed to hold wires or cords when tensile testing up to 2.5 kN.
The specimen is initially wrapped around a bollard and then secured by manually clamping between either blank or diamond-coated jaws. The Mec9 is supplied with the…
1081
Accessory
Wire Grip, 500 N, 10-32 UNF
432-397
The Wire Grip is designed for tensile testing up to 500 N of flexible thin wires, which may break easily when clamped.
The specimen is wrapped around a grooved 19 mm diameter bollard and the free end is clamped tightly in place using a pair of friction…
1082
Accessory
Mini V-block, for Orbis & Tornado
432-423
The Mini V-block is a precision-engineered vice assembly which allows smaller specimens to be securely held in a centrally-aligned position, without excessive clamping force.
Supplied with V-shape, rubber-coated, interlocking jaws with an opening span…
1083
Accessory
Coefficient of Friction (COF) kit to ISO 15359 for FPT-H1
432-639
Integrated kit for use on the FPT-H1 Friction Tester to enable paper and card coefficient of friction testing to ISO 15359.
Comprises:
- a neoprene-faced sled with magnetic grips
- servo-assisted device for raising and lowering of friction sled
- guide…
1084
Accessory
Eccentric Roller Grip - Pyramid (serrated) roller, 5 kN, QC-20 fitting
Mec7-5
MEC7-5
Eccentric Cam Grip fitted with a pyramid-faced serrated 50mm wide roller cam. As a load is applied to a specimen the cam self-tightens , spreading the load evenly.
The lever allows for quick insertion and release of specimen to reduce testing…
1085
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 10 mm opening, pair, QC-20 fitting
Mec240k+2Ko
MEC 240k +2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-10mm depending on the jaw types selected (sold separately).
Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
1086
Accessory
U-Form Pneumatic Vice Grip - Double Action, 2.5 kN, 18 mm opening, pair, QC-20 fitting
Mec240g+2Ko
MEC 240g +2kO (body only) :
A pair of pneumatically-operated, Double-action U-form Vice Grips with an opening of 0-18mm depending on the jaw types selected (sold separately).
Each grip is fitted with 2 x 70 mm diameter pneumatic pistons, which allow…
1087
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 20 mm opening, pair, QC-20 fitting
Mec240k-S20+2Ko
MEC 240k- S20+2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-20mm depending on the jaw types selected. Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow the test specimen…
1088
Accessory
Webbing Grip, 2 kN, QC-20 fitting
432-269
Webbing Grips are designed for tensile testing of high strength belts and tapes below 2 kN.
The sample is wound around the knurled roller and then around the smooth roller. As load is applied, the smooth roller moves in the slot to secure tightly…
1089
Accessory
Lower Torque Fixing Table, Vortex stands
432-320
Lower Torque Fixing Table.
Offers highly versatile holding of containers and specimens when torque testing. Fully adjustable between 10 - 190 mm opening (diameter) to accommodate a variety of forms.
Four rubber-coated, threaded pegs are supplied as…
1090
Accessory
Eccentric Roller Grip - Pyramid (serrated) roller, 5 kN, QC-20 fitting
Mec7-5
MEC7-5
Eccentric Cam Grip fitted with a pyramid-faced serrated 50mm wide roller cam. As a load is applied to a specimen the cam self-tightens , spreading the load evenly.
The lever allows for quick insertion and release of specimen to reduce testing…
1091
Accessory
Filament Grip, 250 N, 10-32 UNF
432-363
The Filament Grip is designed for tensile testing up to 250 N of delicate, flexible specimens such as threads and yarns, which may break easily when clamped.
The specimen is wrapped around a grooved 13mm diameter bollard and the free end is clamped…
1092
Accessory
Parallel Jaw Grip, 500 N, 10-32 UNF
432-396
Parallel Jaw Grips are designed for tensile testing up to 500N of thin flat components and materials, which require secure gripping over an extended surface area.
Star handles allow jaw positions to be adjusted to ensure central loading during tensile…
1093
Specials
Extensometers - Contact and non-contact
.range-group.extensometer .img-text{position:relative;display:block;margin:0;box-shadow:0 1rem 2rem -1rem #0006;border-radius:1rem;overflow:hidden;}
.img-text img{width:100%;height:27.5rem;border-radius:1rem;object-fit:cover;}
.rang
1094
Accessory
Multi-Jaw Grip, 500 N, 10-32 UNF
432-420
Used in tension tests the Multi-Jaw Grip is for holding round and irregularly shaped specimens by clamping on the outer surface or under a 'head'.
By turning the body of the grip the claw-type jaws can be opened and closed to get a secure grasp on a…
1095
Accessory
FPT COF sled 200g (foam) for ASTM D1894 and ISO 8295
432-638
A foam-faced sled with magnetic grips, for testing coefficient of friction of plastic film samples to ASTM D1894 and ISO 8295. Supplied with rigid and extensible links.
For use on the FPT-H1 Friction Tester.
1096
Accessory
U-Form Vice Grip - Double Action, 5 kN, 50 mm opening, QC-20 fitting
Mec240g-S50
MEC 240g-S50 (body only):
A U-form Vice Grip providing free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
The ‘U-Form’ cut into the aluminium…
1097
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 30 mm opening, pair, QC-20 fitting
Mec240k-S30+Ko
MEC 240k- S30+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-30mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter…
1098
Accessory
Excel macro for calculating Z-value (M&S requirement)
840-215
A basic Excel macro which can present the data obtained during "test-to-failure" tests to check the security of attachments in the report-format requested by Marks & Spencer (M&S).
1099
Accessory
Medium Vice Grip - Single Action, 2 kN, 20 mm opening, QC-20 fitting
Mec240k-S20
MEC 240k-S20 (body only) :
A Medium Single-action Vice Grip allowing one jaw to be manually set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place.
Rated to 2…
1100
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 52 mm opening, pair, QC-20 fitting
Mec240k-S50+Ko
MEC 240k- S50+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-52mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic…