Search results
851
Event
Cap Closure and Removal Torque Testing
The primary objective for measuring and analyzing the torque characteristics of a container cap is to accurately determine not only the quality of the part or process, but also the root cause of a wide variety of defects.
852
Case study
Automotive window winder turning effort
Requirement
The customer requested a portable system which would quickly and easily allow him to test the torque required to open and close windows in a car.
853
Bundle
ASTM F88 seal strength tester
OmniTest 2.5
BDO25
ASTM F88 covers the measurement of the strength of seals in flexible barrier materials.
854
Case study
Force de rotation de lève-vitre automobile
Exigence
Le client a demandé un système portable qui lui permettrait rapidement et facilement de tester le couple requis pour ouvrir et fermer manuellement les vitres d'une voiture.
855
[Page extract]
Type d'essai
Mecmesin fournit des solutions pour des essais sur produits ou de matériaux nécessitant la mesure de leur résistance physique.
856
Case study
Insulation film stiffness testing
Customised engineering example
Familiar with three-point bending to test flexural strength properties?
857
Case study
Pot à boisson en poudre - accessoire pour essai en compression
Exemple d'ingénierie sur mesure
Un fournisseur international de boisson au chocolat chaud en poudre souhaitait tester plusieurs aspects de leur emballage.
858
Case study
Tests semi-automatiques de pénétration sur plaques de plâtre
Exemple d'ingénierie sur mesure
British Gypsum (aujourd'hui Saint-Gobain) effectue des tests de pénétration répétitifs afin d'évaluer avec précision les performances et la durabilité de leurs produits.
859
Event
Tensile Testing: Extension, Elongation, Force & Failure
The primary objective for measuring and analyzing the the tensile force value of a product is to accurately determine one or more of these factors:
860
[Page extract]
Tests de force
Les essais de force permettent de déterminer comment un objet réagit lorsqu'il est soumis à des charges de traction ou de compression - soit au cours de son fonctionnement normal, soit
861
Case study
Syringe tube pull-off testing
Customised engineering example
Pull-off tensile tests require careful gripping of the separating parts in order to avoid distorting them and therefore artificially weakening the joint.
862
Case study
Automotive steering components
Customised engineering example
Sometimes the dimensions of a component make force testing difficult to perform. Our client needed to test the sliding force of a bearing along the complete length of an automotive steering rack.
863
Event
Wire Terminal Strength & Crimp Testing Webinar
The only way of really knowing the strength of a crimped terminal is to pull it.
864
Case study
Test d'arrachement du fil sur sachet de thé
Exemple d'ingénierie sur mesure
Certaines des applications les plus simples peuvent sembler moins évidentes lors du test. Une ficelle et une étiquette sur un sachet de thé?
865
Case study
Pharmaceutical sachet burst strength
Customised engineering example
Plastic sachets with welded seams are frequently used for measured applications of liquids, creams and gels.
866
Event
Cap Closure and Removal Torque Testing
The primary objective for measuring and analyzing the torque characteristics of a container cap is to accurately determine not only the quality of the part or process, but also the root cause of a wide variety of defects.
867
Case study
Test d'arrachement du tube de seringue
Exemple d'ingénierie sur mesure
Les essais de traction nécessitent un accessoire de préhension spécific afin d'éviter toute déformation des échantillons à tester et donc d'affaiblir artificiellement la connection.
868
Case study
Torque tester for windows and sunroof controls
Requirement
The customer requested a portable system which would quickly and easily allow him to test the torque required to open and close windows in a car.
869
Case study
Closure torque validation
Requirement
The customer had a number of Tornado closure torque testers, and wished to carry out regular validation checks without the need to return the units to either Mecmesin or an approved laboratory.
870
[Page extract]
ASTM D6241-04
This test method for determining the puncture strength of geotextiles is to be used by the industry as an index of puncture strength.
871
Case study
Synthetic sports surface tuft binding
Customised engineering example
Test method standard BS ISO 4919 applies to the tuft withdrawal force of carpets.
872
Case study
Box-forming and edge crush strength of cartons
Customised engineering example
The Box Crush Test (BCT) is commonly used to assess the effect of applying an axial top-load force upon the flat sides of carton boxes to simulate stacking them in a warehouse or during transportation.
873
Case study
Intégrité de l'assemblage moulé par injection
Exemple d'ingénierie sur mesure
Les sous-ensembles en plastique moulé par injection sont souvent clipsés ou soudés et l'intégrité de l'ensemble doit être testée à plusieurs reprises.
874
Test Frame
Banc d'essai OmniTest (mono-colonne)
Banc d'essai OmniTest
Le banc d'essai motorisé mono-colonne conçu pour appliquer une traction et une compression entre 2 N et 7,5 kN (1686 lbf).
Sa conception polyvalente le rend parfaitement adaptée au test de tous types de…
875
Case study
Train door safety override testing
Customised engineering example
A UK train operator needed a method of testing how sensitive are the carriage sliding doors to detecting an obstacle when closing or opening.