Search results
1851
Accesorio
Diamond-coated Inset jaws, 0.5 set
Mec9-EBD
MEC9-EBD Diamond Jaws
Diamond-coated Inset jaws of 37 mm height x 15 mm width, 0.5 set. For fitting into the carrier of the MEC9 Thin Wire Grip.
Used when jaws need to bite into a soft material to clamp tightly and reduce the risk of slippage.(e.g. soft…
1852
Accesorio
Cone Probe, perspex, 45 degrees, M3
432-081
A perspex conical probe with 45° angle. Cone penetrometry is traditionally used within cosmetics and food products to assess hardness and spreadability. Also applicable for testing biscuits and other similar brittle products. Commonly used with extension…
1853
Accesorio
Heavy-duty Vice Grip - Single Action, 10 kN, QC-20 fitting
Mec154-10
MEC 154-10 (body only - aluminium):
A Single-action Heavy-duty Vice Grip allowing one jaw to be manually set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place…
1854
Accesorio
Small Parallel Grip, 500 N, M6
432-211
Small Parallel Grips are designed for tensile testing of small flat components and materials below 500N.
A floating ball screw attachment ensures central loading during tensile testing and wing screws are used to quickly position the jaws.
Jaw faces…
1855
Accesorio
Pull Peel Wheel Fixture, QC-20 fitting
432-265
The pull peel wheel fixture is designed for mounting to the base of a motorised test stand to test the peel strength of flexible adhesive-backed materials (eg. tapes).
Specimens are wound around the Pull Peel Wheel and the free end is clamped in a…
1856
Accesorio
Footswitch to simulate 'Start' on MultiTest-i and 'xt' stands
PDV14081
Footswitch to simulate 'Start' on '-i' and 'xt' stands from the Vortex, Helixa and MultiTest product families.
Used to free-up an operators hands for other operations (eg. holding a specimen between grips) when launching a test.
1857
Accesorio
MDD Horizontal Feet Kit
432-126
Feet for the horizontal operation of an MDD manual test stand. Supplied as a pair.
1858
Accesorio
Test Hook (small), 50 N, M6
432-171
Small Fixed Hook fitted with M6 female thread. Used for general purpose tension tests.
1859
Accesorio
Lightweight Vice Grip - Double Action, 250 N, Opening 0-46mm, 10-32 UNF
Mec227-S46
MEC 227-S46 (body only):
A Lightweight Vice Grip providing free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
Rated to 250 N in tension with…
1860
Accesorio
Compression Plate, Hardened and Ground, 50 mm, M6
432-197
Hardened and ground compression plates have a smooth, scratch-proof surface ideal for compression testing on samples that could damage a standard compression plate, such as springs.
50mm diameter having M6 female thread.
1861
Accesorio
MLTE 1200 Long Travel Extensometer
432-843
The MLTE 1200 Long Travel Extensometer is designed to be used with Mecmesin test systems when running VectorPro MT materials testing software. It accurately measures strain directly from the test specimen to enable the most accurate calculation of the…
1862
Accesorio
QC Type B Adapter, 20 mm F to M12 fixing bolt, c/w pin
432-283
QC Female Sleeve c/w cross-pin with M12 Fixing Bolt:
Converts a non-QC type grip into a QC type for quick interchange of grips. Fits to loadcells with M12 female thread (eg. ILC-S 2500N and ILC-S 5000N).
1863
Caso de estudio
Embalaje flexible soldada resistencia del sello
Requisito Como marca global, que fabrica productos para las industrias cosmética, doméstica, sanitaria y alimentaria, es vital para Reckitt Benckiser, anteriormente SSL International, tomar medidas para evaluar críticamente y garantizar la ca
1864
Software
Software Emperor Torque
Software Emperor™ Torque
Software fácil de usar con una libertad casi ilimitada para diseñar y personalizar los ensayos de par según sus necesidades. Desarrollado por Mecmesin en estrecha colaboración con nuestros clientes, Emperor™ cuenta ahora con la…
1865
Caso de estudio
Fuerzas de deflexión, inserción y extracción de sellos extruidos
Requisito Vintech Industries Inc. es un proveedor global de nivel 2 de componentes de extrusión termoplásticos para la industria automotriz y no automotriz de vehículos recreativos.
1866
Caso de estudio
Diseño y fabricación de muelles.
Requisito Longcroft Engineering diseña y fabrica muelles, desde prototipos y diseños personalizados hechos a mano hasta producciones de gran volumen.
1867
Caso de estudio
Prueba de lote del inyector de biopsia de la resistencia del resorte del gatillo
Requisito Bard Limited (una división del Reino Unido de CR Bard Inc.) ofrece pistolas de inyección de biopsia Bard® Magnum® para clientes de todo el mundo.
1868
Caso de estudio
Cierres atados que prueban la fuerza de sujeción
Requisito
A medida que los consumidores, fabricantes y legisladores exigen envases más ecológicos y se generaliza el uso de materiales reciclables, la atención se ha centrado en el humilde cierre de plástico.
1869
[Page extract]
Packaging
Mecmesin testing solutions for consumer (primary and secondary) and transit (tertiary) packaging.
1870
Caso de estudio
Pruebas de jeringa según la norma ISO 11040-4, anexo G2, fugas en el cierre
Requisito
La omnipresente jeringa es un dispositivo médico extremadamente importante, que suministra productos inyectables (parenterales) al paciente mediante un mecanismo de cilindro y émbolo.
1871
Caso de estudio
Pruebas de extracción de tapones de whisky.
Requisito Para mejorar la calidad y el almacenamiento de su producto premium de $ 1000, el equipo de I + D de un fabricante de whisky escocés líder necesitaba optimizar el diseño de sus tapones de botellas.
1872
[Page extract]
Standards and regulations in shear testing
Several industry standards and protocols govern food shear testing, ensuring repeatable results and regulatory compliance. Examples include:
1873
[Page extract]
Introduction to strain at maximum stress testing
Strain at maximum stress testing is a critical method in material evaluation, providing a precise measurement of how much a material deforms at the point of its highest applied load.
1874
[Page extract]
FAQs
Find answers to common questions about syringe testing and ISO 11040-4:
1875
[Page extract]
Case studies and practical applications
Screw-cap torque test on PET bottles
A beverage manufacturer identified inconsistencies in bridge torque linked to capping machine variability.