Search results
351
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 30 mm opening, pair, QC-20 fitting
Mec240k-S30+Ko
MEC 240k- S30+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-30mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter…
352
Accessory
CrimpTest-1 kN Calibration Bracket
432-671
The calibration bracket is designed for verifying the accuracy of the CrimpTest-1 kN loadcell readings. For the user, this ensures that a unit does not continue to be used with inaccurate readings across its range. The main bracket should be bolted to a…
353
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 10 mm opening, pair, QC-20 fitting
Mec240k+Ko
MEC 240k +kO (body only) :
A pair of pneumatically-operated, Single-action Medium Vice Grips with an opening of 0-10mm depending on the jaw types selected (sold separately).
Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic…
354
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 20 mm opening, pair, QC-20 fitting
Mec240k-S20+Ko
MEC 240k- S20+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-20mm depending on the jaw types selected. Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic piston.
This…
355
Accessory
Thin Wire Grip with carrier for inset jaws, 2.5 kN, QC-20 fitting
Mec9
MEC9 Thin Wire Grip
Designed to hold wires or cords when tensile testing up to 2.5 kN.
The specimen is initially wrapped around a bollard and then secured by manually clamping between either blank or diamond-coated jaws. The Mec9 is supplied with the…
356
Page
Willkommen bei Mecmesin
Mecmesin entwickelt und produziert Kraft- und Drehmoment-Testmaschinen, um die mechanische Stärke von Komponenten, Produkten und Rohmaterialien in einer Vielzahl von Industrien zu bewerten.
357
Case study
Child resistant closures (CRC) mandrel
Customised engineering example
Child Resistant Closures (CRC) require sufficient vertical force to activate the CR locking mechanism prior to torque being applied.
358
[Page extract]
The 3-Point Bend test goes to Summer School
Both Dr. Cote and Grubbs agree that one of the highlights of their year is the Materials Science summer course for high school students, where they had students design their own candy composites.
359
Case study
Automotive steering components
Customised engineering example
Sometimes the dimensions of a component make force testing difficult to perform. Our client needed to test the sliding force of a bearing along the complete length of an automotive steering rack.
360
Case study
Lighting weld test
Requirement
A simple, low-cost fixture was specified by the customer for the Quality Control Laboratory. This was to hold a lighting assembly in a test where the welded contacts were pulled off.
361
Case study
Elongation test of infusion solution bag
Requirement
Fresenius Kabi is a global manufacturer of pharmaceutical products and delivery systems for infusion therapies and clinical nutrition.
362
Case study
Seed bottle closure torque testing
Requirement
The Royal Botanic Gardens, Kew, have undertaken an international conservation initiative to preserve seed specimens of over 24,000 plant species, protecting them from extinction at the Millennium Seed Bank at Wakehurst Place, West
364
[Page extract]
Software-controlled torque systems
Sophisticated power with easy of use
Looking for an automated torque testing system to improve the accuracy and repeatability of your measurements compared to manual torque testers?<
365
Product
Precision automated torque tester
HelixaPro
876-450
The HelixaPro is a precision torque tester controlled by VectorPro software running on your computer.
366
Product
Motorisierter Zugprüfer
Alluris FMT-W40
PSV21018
Der FMT-W40 ist ein motorisierter Zuganschlussprüfer. Es ist in 2 Modellen mit einer Zugfestigkeit von bis zu 500 N (110 lbf) oder 1000 N (220 lbf) erhältlich. Es ist robust, kompakt und nimmt wenig Platz auf der Arbeitsplatte ein. Der FMT-W40 wurde…
367
[Page extract]
Key methods for compressive strength testing
Several methods are used to determine the compressive strength of materials, and the appropriate test depends on the material and the specific industry requirements.
368
[Page extract]
Introduction to tangent modulus
In materials science and engineering, understanding how materials respond to stress is essential for ensuring safety, performance, and longevity. One key parameter used to characterise this behaviour is the tangent modulus.
369
[Page extract]
How is the trapezoidal tear test performed?
A standard trapezoidal tear test follows a consistent sequence:
370
Product
Digitales Kraftmessgerät
AFG
850-421
Das Erweitertes Kraftmessgerät (AFG) ist das leistungsfähigstes Messgerät von Mecmesin.
Mit einer Genauigkeit von ± 0,1% und Modellen von 2,5 bis 2500 N eignet es sich besonders für die Montage an einem Prüfstand oder als Handgerät…
371
Case study
Bow attachment pull-off test on clothing
Requirement
The customer was a supplier to major UK clothing retailer Marks & Spencer, who stipulate that all fasteners and attachments must be tested to failure.
372
Product
Fallende Dart-Schlagprüfgeräte
MEC-FD-Bereich
MEC-FD1
The Mecmesin MEC-FD Falling Dart Impact Tester range is designed to measure the impact resistance or toughness of plastic films in compliance with ASTM D1709 and ISO 7765-1 free-falling dart Methods A and B.
Dart and weight accessories required…
373
Case study
Cosmetics tin label peel
Customised engineering example
Testing the adhesive peel strength of packaging labels applied at the post-production stage is more representative of their performance than at the label production stage.
374
Case study
Engine fuel pump spring characteristics measurement
Requirement
One of the largest automotive parts manufacturers in the Czech Republic, part of a major group, required a number of its component parts tested under high loads.