Search results
151
Accessory
Pinch Grip, 2 kN, QC-20 fitting
MecS470
The 2 KN Pinch Grip is fitted with 25mm high x 25mm wide pyramid jaw faces to ensure samples are held securely for tensile tests below 2 kN.
One jaw is fixed and the other jaw is on a spring-loaded hinge which opens to 10mm. Fast installation and…
152
Accessory
3-Point Bend Jig, 1 kN, Aluminium, T-slot base
432-248
A lightweight 3-point Bend Jig with 60 mm high upper and lower anvils of 1.5mm radius. Has a support span up to 120 mm.
Ideal for most low-force bending and snapping applications.
For use with T-slot base plate (432-294) - sold separately - to fit…
153
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 20 mm opening, pair, QC-20 fitting
Mec240k-S20+Ko
MEC 240k- S20+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-20mm depending on the jaw types selected. Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic piston.
This…
154
Accessory
50 kN Wedge Grip, QC-32 fitting
Mec243-50
MEC 243-50 Wedge Grip (body only):
A multipurpose self-tightening Wedge Grip with a lever arm for rapidly securing and releasing the specimen when testing.
Rated to 50 kN in tension with an opening of 0-16mm depending on the jaw types selected (sold…
155
Accessory
Wire Grip, 500 N, 10-32 UNF
432-397
The Wire Grip is designed for tensile testing up to 500 N of flexible thin wires, which may break easily when clamped.
The specimen is wrapped around a grooved 19 mm diameter bollard and the free end is clamped tightly in place using a pair of friction…
156
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 30 mm opening, pair, QC-20 fitting
Mec240k-S30+Ko
MEC 240k- S30+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-30mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter…
157
Accessory
Miniature Vice Grip, 100 N, QC-20 fitting
MecS341
Versatile, easy to use, and suitable for small components (eg bonded joints) where access is limited and tensile forces are below 100 N.
Clamping surfaces are machined with pyramid-shaped serrations to ensure optimum gripping force.
The flexible chain-…
158
Accessory
3/8" Upper Chuck Assembly for use on Helixa sensors
432-615
A standard self-centering 3-jaw chuck with key.
It has a maximum ⅜" (9.5 mm) opening and is connected to the Helixa torque sensor via an adaptor with female ⅜" square hole.
Used to secure a variety of test specimens for torque applications of 1.5 - 10…
159
Case study
Scaffold support netting tester
Requirement
Huck, a scaffold netting supplier, run a return to manufacturer service to test netting has not degraded whilst in use.
160
Case study
Automotive switchgear controls testing systems
Requirement
Automotive electrical systems suppliers to OEM manufacturers are tasked with meeting extensive quality and performance standards to remain high tier providers.
161
Case study
Crimped cable connector pull-off force
Requirement
Amphenol is a global interconnect specialist; a world leader in the design, manufacture and supply of high-performance interconnect systems.
162
Case study
Adhesive bond strength of construction panels
Requirement
SIPS Frames UK Ltd (SIPS Eco Panels) is one of the UK’s leading independent Structural Insulated Panel System manufacturers, for use in the construction of kit houses by self builders.
163
Case study
Tethered closures testing attachment force
Requirement
As consumers, manufacturers and legislators demand greener packaging and the growing use of recyclable materials is commonplace, attention has turned to the humble plastic closure.
164
Case study
PCB Copper Track 90 Degree Peel
Requirement
Cambridge Nanotherm Ltd produce a unique, technologically-advanced substrate for the thermal management of electronic components.
165
Case study
Laminated auto windshield perimeter seal peel testing
Requirement
The windshield (or windscreen) in your car is made of laminated glass, which is designed to offer the highest levels of safety in the event of a crash.
166
Case study
Dosage control torque tests for metered inhalers, auto-injectors and insulin pens
Requirement
It goes without saying that the correct administering and proper dose of medicine is fundamental to ensuring the best chance of patient recovery and wellbeing.
167
Page
Calibration
Mecmesin is committed to providing the highest level of after-sales service to our customers worldwide. To keep your force and torque testing equipment in top-class condition you can always rely on our team of distributors and regional offices.
168
Case study
Solar panel peel testing
Requirement
A solar module, also called a PV or photovoltaic module and solar panel, is subjected to extreme conditions of temperature, ultraviolet radiation, rain, ice and wind throughout the year.
169
Case study
Edge Crush Test (ECT) of corrugated cardboard
Requirement
Introduction
Over the weeks of the 2020 global COVID-19 lockdown confinement, there has been a surge of home deliveries, with even e-commerce giants struggling to fulfil demands and hiring fleets of new workers.
170
Case study
Surgical rubber glove tensile strength testing
Requirement
When selecting specialist gloves it is often the material strength and stretch which are the most important factors in determining quality and performance.
171
Product
Automated bottle closure tester
ABC-t
The ABC-t is an automated bottle closure tester to measure both initial slip and bridge torque of a complete batch of roll-on-pilfer-proof (ROPP) closures.
Automated batch testing of closures ensures repeatability without the need for an operator during…
172
Product
Automatisches Drehmomentmesssystem für Flaschenverschlüsse
ABC-t
Der ABC-t ist ein automatisches Flaschenverschluss-Drehmomentprüfsystem zur Messung des Anfangsschlupfes und des Brückendrehmoments einer vollständigen Charge von ROPP-Verschlüssen (Roll-on-Pilfer-Proof).
Automatisierte Chargentests von…
173
Product
Torque Tool Tester
Alluris TTT-300
PSV21020
The TTT-300 range features portable torque testers designed for measuring the click torque and maximum torque values of indicating and setting torque tools.5 different models are available with capacities from 2 N.m to 50N.m making them ideal for quick…
174
Case study
Tennis ball compression test
Requirement
The ITF (International Tennis Federation) invited Mecmesin to bid for a project to replace their outdated ‘Stevens’ test machine used to measure the force to ‘squash’ a tennis ball.
175
Case study
Hygienic disposal bin closure testing
Customised engineering example
A manufacturer of hygienic disposal bins came to us with a nappy (diaper) disposal unit fitted with a rotary intake mechanism.