Search results
1426
[Page extract]
Introduction to elongation and recovery testing
In industries working with textiles, rubber, elastomers, and flexible plastics, these properties are directly linked to product reli
1427
Event
Essentials of Adhesion (Peel) Testing
There is a reason people reach for Duct Tape as a fix for almost everything – Adhesion Strength. From busted pipes to ripped furniture, the preference for a solution that “does not easily peel off” is the guiding principle for manufactures.
1428
Case study
Press stud popper pull-off test
Requirement
The customer was a supplier to major clothing retailer Marks & Spencer, who stipulate that all fasteners and attachments must be tested to failure.
1429
Case study
Flip-Cap-Krafttest
Anforderung Ein wiederholbares Testsystem zur Überprüfung der Öffnungskraft von Flip-Cap-Deckeln mit 3 Deckeln mit unterschiedlichen Durchmessern und minimalem Wechsel der Befestigung.
1430
[Page extract]
How the strip method works
The strip method involves cutting a specimen to a precise width, typically 50 mm or 25 mm depending on the applicable standard, and mounting it in the grips of a tensile testing
1431
Event
Tensile Testing for Wiring Harness Connections
The only way of really knowing the strength of a crimped terminal is to pull it. This can reveal production problems, where strand nicks, incorrect crimp height, or effects from changes in terminal supply, may not be clearly apparent.
1432
Case study
Beleuchtungsschweißtest
Anforderung Für das Qualitätskontrolllabor wurde vom Kunden eine einfache, kostengünstige Vorrichtung spezifiziert. Dies sollte eine Beleuchtungsbaugruppe in einem Test halten, bei dem die geschweißten Kontakte abgezogen wurden.
1433
[Page extract]
Torque systems
Do you need a level of accuracy and repeatability which just cannot be achieved by manual testers? Do you want to reduce testing time and increase throughput for operators when performing batch tests?
1434
Case study
Adjustable spectacles torque test
Customised engineering example
Adlens manufacture adaptive spectacle lenses, where the optical power is adjusted by a side dial which is then removed.
1435
[Page extract]
BS EN ISO 205
Adhesives. Wood adhesives for non-structural applications. Determination of tensile shear strength of lap joints.
1436
[Page extract]
Compression testing standards
Following recognised standards ensures test data is reliable and comparable. Standards specify specimen preparation, testing speeds, calculations and reporting methods.
1437
Case study
Cable duct strength testing
Customised engineering example
Our customer manufactures tubes and ducts for routing of cables and optical fibres. Installation of these uses blowing, pushing and pulling techniques.
1438
Case study
Child resistant closures (CRC) mandrel
Customised engineering example
Child Resistant Closures (CRC) require sufficient vertical force to activate the CR locking mechanism prior to torque being applied.
1439
Event
Webinar: Essentials of Grip & Fixture Selection in Force & Torque Testing
For a test to work, the test system needs to properly interface with its specimen.
1440
Event
Tensile Testing for Wiring Harness Connections
The only way of really knowing the strength of a crimped terminal is to pull it. This can reveal production problems, where strand nicks, incorrect crimp height, or effects from changes in terminal supply, may not be clearly apparent.
1441
[Page extract]
Types of calculations handled
Mecmesin’s VectorPro software supports a wide range of test calculations, automatically derived from mechanical testing data:
1442
Case study
Medical devices testing
Requirement
To provide a low cost, flexible tensile test machine which could be used in conjunction with special fixturing, to perform a range of functional and destructive tests on a range of products.
1443
Product
Klebkraftprüfgerät für gebundene Bücher
Buchseitenkraftmessgerät
802-001+853-415
Das Mecmesin 'Pira' Buchseitenkraftmessgerät wird weltweit in über 100 Bindemitteln eingesetzt .
Es bietet eine robuste, kostengünstige Lösung zum Messen der Seitenzugfestigkeit von perfekt gebundenen Büchern.
Das Buchseitenkraftmessgerät ermöglicht…
1444
[Page extract]
ASTM D5868-01
Due to the increased use of adhesively-bonded FRP as a result of the inherent advantages afforded by bonded rather than mechanically-fastened joints (particularly the alleviation of stress risers and stress cracking), there is a need for tests by which
1446
Case study
Box crush test (BCT) and transit packaging compression testing
Customised engineering example
Boxes for the consumer and transit packaging industries must be as light as possible whilst still retaining a robustness to contain and protect their contents and also have the strength to stand up to shipping, ha
1447
Case study
Pork pie penetration test
Requirement
Vale of Mowbray have been baking pork pies since 1928.
1448
[Page extract]
BS EN ISO 4624
Describes methods for determining the adhesion by carrying out a pull-off test on a single coating or a multi-coat system of paint, varnish or related product.
1449
Case study
Display thin film coating 90 degree peel test
Requirement
The Thin Film Centre at University of Paisley conducts ground-breaking research into flexible displays and required the means to analyse the adhesion between films and their substrates.
1450
Case study
Lanzettennadel-Retentionstest
Anforderung Ein in Großbritannien ansässiges Unternehmen für medizinische Geräte, das eine Reihe von Geräten zur Überwachung und Kontrolle des Blutzuckerspiegels entwickelt und herstellt, die von Angehörigen der Gesundheitsberufe und Verbrauc