Search results
576
Case study
Luer lock fastening and release torque
Customised engineering example
Luer lock test standards frequently call for measuring torque whilst simultaneously applying a pre-defined axial force.
577
Case study
Removal torque of 'squeeze and twist' child-resistant cap
Requirement
Reckitt-Benckiser are manufacturers of the distinctive HDPE (High Density Polyethylene) swan-neck 'Harpic' cleaning fluid bottles.
578
[Page extract]
IEC 61210
IEC 61210:2010 applies to non-insulated flat quick-connect terminations consisting of a male tab of size 2,8 mm, 4,8 mm, 6,3 mm or 9,5 mm with hole or dimple detents and a mating female connector for use as either an incorporated or an integrated part o
579
Case study
Mandris divididos para teste de torque de fechamento
Exemplo de engenharia customizada As superfícies lisas das tampas de torção, usadas em garrafas e potes, exigem força de preensão suficiente para evitar escorregar durante um teste de torque, mas sem criar distorção na tampa.
580
Page
Accessory catalogue
Choosing your accessories
To achieve accurate test results it's important that your sample is gripped and held correctly.
581
Event
Cap Closure and Removal Torque Testing
The primary objective for measuring and analyzing the torque characteristics of a container cap is to accurately determine not only the quality of the part or process, but also the root cause of a wide variety of defects.
582
Event
Essentials of GRIP & FIXTURE Selection in Force & Torque Testing Webinar
When physically testing a material or component, the ability to apply load to a test specimen is important—but having the ability to apply that load correctly is just as crucial.
583
[Page extract]
Standards for box crush testing
ASTM D642-00
This standard specifies methods for determining the compressive resistance of shipping containers, both filled and empty.
584
Event
Materials Testing: Theory and Practice Pt. 2
Materials testing is often the last step in the manufacturing process. Yet, quality is the result of both the process and the material. If the material that goes into the product is inadequate or defective, then the product may be deficient or faulty.
585
Case study
Needle to ferrule pull-out test
Requirement
The customer, Oxford Instruments, wished to perform a destructive pull-out test to evaluate the maximum tension force to pull the 2 components apart.
586
Event
Tensile Testing for Wiring Harness Connections
The only way of really knowing the strength of a crimped terminal is to pull it. This can reveal production problems, where strand nicks, incorrect crimp height, or effects from changes in terminal supply, may not be clearly apparent.
587
Case study
Lighting weld test
Requirement
A simple, low-cost fixture was specified by the customer for the Quality Control Laboratory. This was to hold a lighting assembly in a test where the welded contacts were pulled off.
588
Event
Tensile Testing for Wiring Harness Connections
The only way of really knowing the strength of a crimped terminal is to pull it. This can reveal production problems, where strand nicks, incorrect crimp height, or effects from changes in terminal supply, may not be clearly apparent.
589
Case study
Sistema Rotativo de Peeling a Vácuo
Requerimento O teste foi necessário para uma variedade de bandejas de plástico flexíveis da mesma dimensão, mas com formas diferentes, contendo biscoitos e confeitaria.
591
Event
Cap Closure and Removal Torque Testing
The primary objective for measuring and analyzing the torque characteristics of a container cap is to accurately determine not only the quality of the part or process, but also the root cause of a wide variety of defects.
592
Case study
Wall-mounted air freshener destructive loading evaluation
Requirement
The customer wished to apply a controlled load of 350N to a wall mounted air freshener, replicating the effect of a child standing on it. The load needed to be applied in turn to 4 different planes on the product, e.g.
593
Case study
Elongation test of infusion solution bag
Requirement
Fresenius Kabi is a global manufacturer of pharmaceutical products and delivery systems for infusion therapies and clinical nutrition.
594
[Page extract]
Applications in advanced ceramics and composites
Four-point bend testing is the preferred approach for assessing the flexural strength of advanced ceramics<
595
[Page extract]
Standards for compressive hardness testing
Internationally recognised standards ensure that compressive hardness tests are accurate, repeatable, and comparable.
596
Event
Medical Device Testing: Needle sharpness and syringe actuation testing (with 21 CFR Part 11 compliance)
Hypodermic needles are tested to determine their efficacy in piercing elastomer closures on vials and how their design influences the ease of insertion into the patient's skin, influencing pain and skin trauma.
The smooth and consistent operat
598
Case study
Child safety - force to extract lighter
Requirement
The customer manufactures lighters and is currently developing a case/guard designed to increase the safety for children.
599
Case study
Screw retention force of building materials
Requirement
A leading manufacturer and distributor of metal building roofing systems for the construction industry wanted to ascertain the pull out force of screws fixed to building materials.
600
Event
Fundamentals of Food Texture Testing
Texture cannot be controlled unless it is measured in a consistent and repeatable manner.