Search results
801
Accessory
U-Form Pneumatic Vice Grip - Double Action, 2.5 kN, 18 mm opening, pair, QC-20 fitting
Mec240g+2Ko
MEC 240g +2kO (body only) :
A pair of pneumatically-operated, Double-action U-form Vice Grips with an opening of 0-18mm depending on the jaw types selected (sold separately).
Each grip is fitted with 2 x 70 mm diameter pneumatic pistons, which allow…
802
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 20 mm opening, pair, QC-20 fitting
Mec240k-S20+2Ko
MEC 240k- S20+2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-20mm depending on the jaw types selected. Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow the test specimen…
803
Accessory
V-jaw vice clamp, three jaws with quick release lever, 500N, QC-20 fitting
432-677
432-677 is a vice fixture for mounting to the base of a test stand when performing tension and compression tests. It has three jaws, two vertically spaced on one side, clamping with a single jaw at mid-height. The double jaw is precisely adjusted with a…
804
Accessory
Coefficient of Friction COF Fixture (ASTM D1894), 10-32 UNF
432-144
Designed to measure the coefficient of friction (COF) to ASTM D1894, between two pieces of material.
The COF test determines the kinetic and static resistance of one surface being dragged across another.
This friction table can be mounted to the base…
805
Accessory
Popper Cam Base, 1 kN, 10-32 UNF
432-179
The Popper Cam Base is used to secure the fabric when testing the strength of press studs ('poppers'), particularly on children’s clothing.
It is secured to the base of the test stand and the popper is fed through the retaining hole and positioned over…
806
Accessory
Small Container Holder, 100 N, 10-78 mm
432-493
A versatile gripping fixture to hold containers when conducting low-force pull-off tests on closures and other fixings (eg. flip-cap lids).
4-pegs hold the container on an adjustable lead-screw and the knob secures the container tightly in place.…
807
Accessory
38 mm Crosshead extension only
432-508
The dovetailed crosshead-extension allows the loadcell on a single-column MultiTest stand to be positioned further from the column to accommodate larger test samples or to fit deeper grips without hitting the column.
Load rating of the test stand is…
808
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 30 mm opening, pair, QC-20 fitting
Mec240k-S30+2Ko
MEC 240k- S30+2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-30mm depending on the jaw types selected (sold separately). Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
809
Accessory
U-Form Vice Grip - Double Action, 5 kN, 28 mm opening, QC-20 fitting
Mec240g
MEC 240g (body only):
A U-form Vice Grip providing free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
The ‘U-Form’ cut into the aluminium…
810
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 52 mm opening, pair, QC-20 fitting
Mec240k-S50+Ko
MEC 240k- S50+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-52mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic…
811
Accessory
Eccentric Roller Grip - Pyramid (serrated) roller, 10 kN, QC-20 fitting
Mec7-10
MEC7-10 Eccentric Cam Grip
Fitted with a pyramid-faced serrated 60mm wide roller cam. As a load is applied to a specimen the cam self-tightens , spreading the load evenly.
The lever allows for quick insertion and release of specimen to reduce testing…
812
Accessory
16 mm Crosshead Extension
432-307
The 16mm dovetailed crosshead-extension allows the loadcell on a single-column MultiTest stand to be positioned further from the column to accommodate larger test samples or deeper grips.
Load rating of test stand is reduced by 25%.
813
Accessory
Eccentric Roller Grip - Smooth roller against rubber base, 1 kN, QC-20 fitting
Mec7-1-SR
MEC7-1-SR Eccentric Cam Grip
Fitted with a smooth-faced 50mm wide roller cam and a rubber-coating on the contact face of the grip body. As a load is applied to a specimen the cam self-tightens, spreading the load evenly. Used for specimens where a…
814
Event
Tensile Testing: Extension, Elongation, Force & Failure
The primary objective for measuring and analyzing the the tensile force value of a product is to accurately determine one or more of these factors:
815
Event
Wine & Spirits: Pull Tab & Twist Cap Testing
Canned wine and seltzer drinks have a clear upside that makes their popularity soar: Convenience. As well as being lighter to carry, less potentially fragile, eliminating the corkscrew, and even a glass makes it ideal for social gatherings.
816
Event
Webinar: Essentials of Adhesion/Peel strength testing
There is a reason people reach for duct tape as a fix for almost everything – adhesion strength.
817
Event
Fundamentals of Compression Testing
How much force is required to register a command when you click your computer mouse?
How much force can a water bottle take before it collapses in its case under a stack?
818
Event
Introduction to Consumer Packaging Testing
Damaged packaging can not only cost money but also impact brand perception. Consumers are less likely to purchase a product with damaged packaging, or if their product arrives damaged from poor packaging during the shipping and transport process.
819
Bundle
Sharps puncture tester
OmniTest 2.5
BD001
A tester designed for key international standards such as ASTM F2132, BS 7320, and BS 23907 that specify the test procedures for puncture resistance of medical sharps containers.
820
[Page extract]
ASTM F1342
This test method evaluates puncture resistance of protective clothing materials which may include plastics or elastomeric films, coated fabrics, flexible materials, laminates, or textile materials.
821
Event
Wine & Spirits: Pull Tab & Twist Cap Testing
Canned wine and seltzer drinks have a clear upside that makes their popularity soar: Convenience. As well as being lighter to carry, less potentially fragile, eliminating the corkscrew, and even a glass makes it ideal for social gatherings.
822
Event
Webinar: Adhesion/Peel strength testing
There is a reason people reach for duct tape as a fix for almost everything – adhesion strength.
From busted pipes to ripped furniture, the preference for a solution that “does not easily peel off” is the guiding principle for manufacturers.
823
Event
Compression Testing in Top Load Applications
A typical challenge in packaging, and bottling applications is trying to balance product integrity, where the container might be too weak and crush under load, and excessive raw material cost, where the container is too strong.
824
Specials
FAQs sobre UTM
Perguntas frequentes
Como a máquina de teste universal OmniTest se compara em tamanho e portabilidade?
A máquina de teste universal (UTM
825
[Page extract]
Torque testing
Torque testing is a way of determining how an object will react when it is being turned - during normal operation or being twisted until it deliberately fails or breaks.