Search results
1051
Event
Fundamentals of Food Texture Testing and Analysis
Texture cannot be controlled unless it measured in a consistent and repeatable manner.
1052
[Page extract]
ASTM F3014-14
1.1 This test method describes the procedure for penetration testing sharp and blunt needles used for the placement of surgical sutures. It only describes the test procedures (Phase 1) and does not define a test medium at this time.
1053
Case study
Luer lock fastening and release torque
Customised engineering example
Luer lock test standards frequently call for measuring torque whilst simultaneously applying a pre-defined axial force.
1054
[Page extract]
BS EN ISO 19011:2011
Provides the fundamental knowledge needed for auditing management systems and has been expanded to reflect modern thinking and the intricacies of auditing multiple management system standards (MSS).
1055
[Page extract]
ASTM F2132-01
This specification provides the performance requirements and associated test procedures for the puncture resistance of materials used in the construction of containers for discarded medical needles and other sharps.
1056
Event
Tensile Testing: Basics, Tips and Trends
Have you ever wondered if the seatbelt in your vehicle is strong enough to restrain you in a collision? How about the average person pulling the cork out of a wine bottle?
1057
Event
Tensile Testing: Basics, Tips, & Trends
Have you ever wondered if the seatbelt in your vehicle is strong enough to restrain you in a collision? How about the average person pulling the cork out of a wine bottle?
1058
Event
Understanding Adhesion Strength: 180 Degree Peel Test
Across many households and industries, consumers have developed a strong preference for and confidence in ‘Duct Tape’ for all types of uses and applications. This is mainly due to the adhesion strength.
1059
Event
Understanding Adhesion Strength: 180 Degree Peel Test
Across many households and industries, consumers have developed a strong preference for and confidence in ‘Duct Tape’ for all types of uses and applications. This is mainly due to the adhesion strength.
1060
Accessory
Charger for digital gauges, USA, 110 V/115 V, 2-pin flat
304-006
For use with Mecmesin digital force and torque gauges. 110 Volt with 2 flat pins. Commonly used in USA, Canada, Mexico and Japan.
The mains adaptor/charger is a constant-current type:
Primary circuit: 110V – 50-60Hz
Secondary circuit: 100mA constant…
1061
Accessory
Blank (smooth) jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 50 mm
Mec240k-B50
Blank Jaws (30mm x 50mm) - smooth steel jaw. Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = see datasheet for various spans according to the grip body selected.
Supplied as 0.5 set = 2 jaws (left…
1062
Accessory
Diamond coated jaws for Mec227 Lightweight Vice Grip, 250 N, 10 x 50 mm
Mec227-BD50
Diamond Jaws (10mm x 50mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = 0 - 8mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)…
1063
Accessory
Lightweight hanger and 5 N slotted mass for verifying FPT 10 N
432-655
A lightweight hanger and an M1 slotted mass of 5N.
For use with the FPT-H1 loadcell calibration checking kit (432-635) to verify the accuracy of HILC 10 N loadcells.
1064
Accessory
Wave jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 30 mm
Mec240k-BW
Wave Jaws (30mm x 30mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g. textiles, fabrics and tissues).
Supplied as 0.5 set = 2 jaws (left…
1065
Accessory
Lightweight hanger and 50 N slotted mass for verifying FPT 100 N
432-656
A lightweight hanger and an M1 slotted mass of 50N.
For use with the FPT-H1 loadcell calibration checking kit (432-635) to verify the accuracy of HILC 100 N loadcells.
1066
Accessory
sample holder for standard fixture table
432-244
Fits to the standard fixture table (432-243) and used for easy configuration and alignment of test fixtures. The small-sample holder has been designed to accommodate spherical or irregular samples. Three sizes of holding plate are supplied.
1067
Accessory
Blank (smooth) jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 30 mm
Mec240k-B
Blank Jaws (30mm x 30mm) - smooth steel jaw. Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = see datasheet for various spans according to the grip body selected.
Supplied as 0.5 set = 2 jaws (left…
1068
Accessory
Wave jaws for Mec11-20 Scissor Grip, 20 kN, 25 x 50 mm
Mec11-20-BW
Wave Jaws (25mm x 50mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g. textiles, fabrics and tissues).
Supplied as 0.5 set = 2 jaws (left…
1069
Accessory
Plastic Carrying Case for AFTI, S-Beam loadcell, TS torque screwdriver and charger
416-049
A foam-lined plastic carry-case for the AFTI display.
Has space for:
AFTI display including rechargeable batteries,
mains adaptor / battery charger,
'Smart' S-beam Loadcell,
'Smart' TS Torque Screwdriver.
1070
Accessory
Blank (smooth) jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 100 mm
Mec240k-B100
Blank Jaws (30mm x 100mm) - smooth steel jaw. Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = see datasheet for various spans according to the grip body selected.
Supplied as 0.5 set = 2 jaws (left…
1071
Accessory
Diamond coated jaws for Mec227 Lightweight Vice Grip, 250 N, 10 x 25 mm
Mec227-BD25
Diamond Jaws (10mm x 25mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = 0 - 8mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)…
1072
Accessory
Charger for digital gauges, Europe, 230 V, 2-pin round
304-004
For use with Mecmesin digital force and torque gauges. 220 Volt with 2 round pins. Commonly used in Europe, South America and Asia.
The mains adaptor/charger is a constant-current type:
Primary circuit: 230V – 50Hz
Secondary circuit: 100mA constant…
1073
Accessory
V-profile jaws for Mec11-50 Scissor Grip, 50 kN, 10 - 48mm diameter
Mec11-50-BV10
V-Jaws (10-48mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods,
tubes).
Supplied as 0.5 set = 2 jaws…
1074
Accessory
Wave jaws for Mec11-20 Scissor Grip, 20 kN, 25 x 50 mm
Mec11-20-BW
Wave Jaws (25mm x 50mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g. textiles, fabrics and tissues).
Supplied as 0.5 set = 2 jaws (left…
1075
Accessory
Crosshead for Vortex-d & -dV, without sensor
432-474
A complete crosshead assembly for the Vortex-d and Vortex-dV motorised torque test stands.
The assembly comprises:
crosshead with fixing knobs,
movable central carriage on rods including top-plate holder
torque sensor mounting plate - (Note: sensor…