Search results
1101
Accessory
sample holder for standard fixture table
432-244
Fits to the standard fixture table (432-243) and used for easy configuration and alignment of test fixtures. The small-sample holder has been designed to accommodate spherical or irregular samples. Three sizes of holding plate are supplied.
1102
Accessory
Diamond coated jaws for Mec240k Medium Vice Grip, 30 x 100 mm
Mec240k-BD100
Diamond Jaws (30mm x 100mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = see datasheet for various spans according to the grip body selected.
For materials which need a “bite” to secure a good grip (e.g. soft…
1103
Accessory
Interface cable, AFG/AFTI (Orbis Mk2/Tornado), 15-pin D socket to USB-A
351-086
Connects the AFG, AFTI (2006 - now), Orbis or Tornado (2008 - now) to the USB port of a PC for data transfer by RS232.
Comprises a 15-pin female D-connector to USB-A connector.
1104
Accessory
20 kN Wedge Grip, QC-20 fitting
Mec243-20
MEC 243-20 Wedge Grip (body only):
A multipurpose self-tightening Wedge Grip with a lever arm for rapidly securing and releasing the specimen when testing.
Rated to 20 kN in tension with an opening of 0-16mm depending on the jaw types selected (sold…
1105
Accessory
Upper Key-operated Chuck, square drive, for use with Vortex sensors
432-444
Upper ‘key-operated’ 4-jaw Chuck (small)
Fitted with a square-drive adapter for connection to 'Vortex' torque sensors. Supplied with dedicated chuck-key and 3 different sets of interchangeable jaws. Max.opening 50mm depending on jaws selected.
Used for…
1106
Test Frame
MultiTest-dV test frame
MultiTest-dV test frame
A ballscrew-driven motorised test frame designed to apply tension and compression from 2 N right up to a capacity of 2.5 kN (550 lbf).Its versatile construction makes it perfectly suited for testing all kinds of components in a…
1107
[Page extract]
Government
The general government sector covers institutions and public bodies where regulations and standards must be strictly adhered to.
1108
[Page extract]
FAQs about torque to turn testing
What is the difference between breakaway and running torque?
1109
[Page extract]
Equipment and procedures
A flat crush tester comprises two smooth, parallel platens, one fixed and one moving under controlled load application. The conditioned specimen is placed between the platens with flutes oriented vertically.
1110
[Page extract]
Tension testing process
Tension testing is the most common method for evaluating tensile deformation and produces quantitative data on how materials behave under controlled pulling forces.
1111
[Page extract]
Methods for measuring coefficient of friction
The most widely adopted technique for measuring both static and kinetic coefficients of friction (COF) is the hori
1112
[Page extract]
Introduction to rotational shear testing
Rotational shear testing is a specialised method used to measure the torque or twisting force required to deform a material or component.
1113
[Page extract]
Understanding compressive deformation
Compressive deformation is the change in shape or size of a material when it is subjected to compressive forces. This can involve a reduction in length, thickness, or volume when an object is pressed or squeezed.
1114
[Page extract]
Overview of TerraFixing
TerraFixing is dedicated to combating climate change through affordable and scalable Direct Air Carbon Capture (DAC).
1115
[Page extract]
Mecmesin equipment for torque to turn testing
Mecmesin offers a range of precision torque test systems, including the OmniTest and
1116
[Page extract]
Key testing methods
Different materials require different approaches to compressive hardness testing. The most common methods are:
1117
[Page extract]
Puncture and shear testing techniques and equipment
Testing involves applying a force to a clamped specimen until the material fails, with the method determined by the applicable standard.
1118
[Page extract]
How is torque to turn testing performed?
Torque to turn testing typically involves mounting the test specimen in a secure fixture, aligning the axis of rotation, and applying torque until the component begins to move.
1119
[Page extract]
Introduction to material mechanics
Material mechanics is the study of how materials respond to forces such as tension, compression, torsion and shear. It is a core discipline within engineering, underpinning design, manufacturing and quality assurance across many sectors.
1120
[Page extract]
Industry applications of flexural testing
Plastics and thermoplastics
Flexural testing reveals the stiffness, yield point, and failure mode of plastics, informing mate
1121
[Page extract]
Coefficient of friction (COF) explained
Understanding the COF formula
The coefficient of friction (μ) is a dimensionless value calculated as:
1122
[Page extract]
Understanding tear strength and its importance
Tear strength measures the force a material can withstand before a tear propagates. It covers both the initial rupture and the resistance to further tearing once damage has started.
1123
[Page extract]
ASTM and ISO approaches
ASTM D1938 specifies trouser tear testing for thin plastic films and sheeting, including specimen dimensions, pre-cu
1124
[Page extract]
Testing procedures for electrical connectors
For electrical connectors, insertion and withdrawal testing is essential to ensure reliable contact, mechanical robustness, and compliance with relevant standards.<
1125
[Page extract]
Standards for top-load testing
ASTM D2659
Specifies the method for determining the column crush resistance of blown thermoplastic containers.