Search results
276
Accessory
Pyramid (serrated) jaws, 30 x 100 mm, 0.5 set
Mec240k-BP100
Pyramid Jaws (30mm x 100mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
277
Accessory
Wave jaws for Mec154 Heavy-duty Vice Grip, 20kN, 40 x 100 mm
Mec154-BW100
Wave Jaws (40mm x 100mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
Opening span = 0 - 30 mm.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g. textiles, fabrics and tissues).…
278
Accessory
Wave jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 80 mm
Mec240k-BW80
Wave Jaws (30mm x 80mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g. textiles, fabrics and tissues).
Supplied as 0.5 set = 2 jaws (left…
279
Accessory
Blank (smooth) jaws for Mec227 Lightweight Vice Grip, 250 N, 10 x 100 mm
Mec227-B100
Blank Jaws (10mm x 100mm) - smooth aluminium jaw. Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = 0 - 6mm.
Supplied as 0.5 set = 2 jaws (left…
280
Accessory
Rubber jaws for Mec227 Lightweight Vice Grip, 250 N, 10 x 25mm
Mec227-BG25
Rubber-faced Jaws (10mm x 25mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0 - 6mm.
For fragile samples, which may get weakened by pinching at the contact-edge of the grip. (e.g. thin films, filaments, fibres and…
281
Accessory
Interface cable RS232, 9-pin D-type plug to USB-A
432-450
A 9-pin RS232 male D-connector to USB-A connector. For use with VTG Tornado.
Also suitable for connecting to 'old' gauge cables which have 9-pin RS232 female D-connectors. Fits to part numbers 351-059, 351-054, 351-040 and 351-051.
282
Accessory
Cone Probe, perspex, 45 degrees, M3
432-081
A perspex conical probe with 45° angle. Cone penetrometry is traditionally used within cosmetics and food products to assess hardness and spreadability. Also applicable for testing biscuits and other similar brittle products. Commonly used with extension…
283
Accessory
Blank (smooth) jaws for Mec240g U-Form Vice Grip, 5 kN, 30 x 100 mm
Mec240g-B100
Blank Jaws (30mm x 100mm) - smooth steel jaw. Allows the user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = see datasheet for various spans according to the grip body selected.
Supplied as 0.5 set = 2 jaws (left…
284
Accessory
90-degree Peel Jig for FPT-H1
432-620
This 90-degree Peel Jig fits to the FPT-H1 for 90 degree peel testing of pressure sensitive tapes and labels in accordance with international standards.
FINAT FTM2, ASTM D330. PSTC 101 Method F.
It accepts interchangeable float glass and stainless steel…
285
Accessory
25 mm/50 mm Grab Test Textile Fixture, 500 N, 10-32 UNF
432-323
The 'Grab Test' Textile Fixture has jaws of 25mm…
286
Accessory
Pyramid (serrated) jaws for Mec240g U-Form Vice Grip, 5 kN, 30 x 50 mm
Mec240g-BP
Pyramid Jaws (30mm high x 50mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Opening span = see datasheet for various spans according to the grip body selected.
For materials which need a “bite” to secure a good grip…
287
Accessory
Blank (smooth) jaws for Mec154 Heavy-duty Vice Grip, 20 kN, 40 x 100 mm
Mec154-B100
Blank Jaws (40mm high x 100mm wide) - smooth steel jaw.
Opening span = 0 - 34 mm.
Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Supplied as 0.5 set = 2 jaws (left…
288
Accessory
Blank (smooth) jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 30 mm
Mec240k-B
Blank Jaws (30mm x 30mm) - smooth steel jaw. Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = see datasheet for various spans according to the grip body selected.
Supplied as 0.5 set = 2 jaws (left…
289
Accessory
V-jaws for Mec154 Heavy-duty Vice Grip, 20kN, for round samples Ø 6-34 mm
Mec154-BV6
V-Jaws (6-34 mm diameter with clamping height of 40mm) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods, tubes)…
290
Accessory
Rubber jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 30 mm
Mec240k-BG
Rubber-faced Jaws (30mm x 30mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = see datasheet for various spans according to the grip body selected.
For fragile samples, which may get weakened by pinching at the contact-…
291
Accessory
Pyramid (serrated) jaws for 20 & 50kN Wedge Grip, 50 x 35mm, 0 -13mm opening
Mec243-BP
Pyramid Jaws (50mm high x 35mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Jaw opening = 4 - 16mm.
For flat specimens of materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft…
292
Accessory
V-jaws for Mec240k Medium Vice Grip, 2.5 kN, for round samples Ø 2-52 mm
Mec240k-BV2
V-Jaws (2-52mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods, tubes)
Supplied as 0.5 set = 2 jaws (…
293
Accessory
Rubber jaws for Lightweight Pneumatic Plane Grip, 200 N, 25 x 25 mm
Mec94-BG25
Rubber-faced Jaws (25mm x 25mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0 - 18mm.
For fragile samples, which may get weakened by pinching at the contact-edge of the grip. (e.g. thin films, filaments, fibres and…
294
Accessory
V-jaws for 20 & 50kN Wedge Grip, for round samples 3-13 mm
Mec243-BV
V-Jaws (3-13mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods, tubes).
Supplied as 0.5 set = 2 jaws…
295
Accessory
FINAT 2 Assisted Pull-Peel Table, 90 degrees, adjustable rails for float glass, QC-20
PDV15031
The FINAT 2 Assisted Pull-Peel table (90° Peel Test) is fitted to the anvil plate of a motorised test stand and then connected to the crosshead of a test stand. It is commonly used for conducting peel tests on adhesive tapes and films.
The carriage of…
296
Accessory
Self-levelling Compression Plate Steel - 96 mm, 50 kN, QC-32 fitting
MecS223g-96
MecS223g - 96mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates - ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel,…
297
Accessory
Pyramid (serrated) jaws for Lightweight Pneumatic Plane Grip, 200 N, 25 x 25 mm
Mec94-BP25
Pyramid Jaws (25mm high x 25mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Opening span = 0 - 20 mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper…
298
Accessory
Rubber jaws for Mec83 U-Form Pneumatic Vice Grip, 5 kN, 40 x 100 mm
Mec83-BG100
Rubber-faced Jaws (40mm x 100mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0-10mm, 10-20mm or 20-30mm depending on which rod and piston are fitted to the Mec83 body.
For fragile samples, which may get weakened by…
299
Accessory
Smooth jaws for Mec11-20 Scissor Grip, 20 kN, 25 x 50 mm
Mec11-20-B
Blank Jaws (25mm x 50mm) - smooth steel jaw. Allows user to machine or affix own surface.
Supplied as 0.5 set = 2 jaws (left & right). Order any combination of 2 half sets of jaws to fit into a pair of MEC11-20 Scissor Grips (upper & lower)
300
Accessory
Self-levelling Compression Plate Steel - 96 mm, 25 kN, QC-20 fitting
MecS223k-96
MecS223k - 96mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates.. ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel…