Search results
551
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 10 mm opening, pair, QC-20 fitting
Mec240k+Ko
MEC 240k +kO (body only) :
A pair of pneumatically-operated, Single-action Medium Vice Grips with an opening of 0-10mm depending on the jaw types selected (sold separately).
Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic…
552
Accessory
Large Pneumatic Plane Grips, pyramid-faced jaws, 1 kN, Pair, QC-20 fitting
432-276
A pair of pneumatically-operated, single-action Large Pneumatic Plane Grips with an opening of 0-14 mm.
Each 30mm high x 51mm wide jaw is fitted with a pyramidal surface to secure specimens tightly. The specimen is held between the fixed jaw and the…
553
Accessory
Cone Probe, perspex, 45 degrees, M3
432-081
A perspex conical probe with 45° angle. Cone penetrometry is traditionally used within cosmetics and food products to assess hardness and spreadability. Also applicable for testing biscuits and other similar brittle products. Commonly used with extension…
554
Accessory
Double Cam Grip (small serrated), 500 N, 10-32 UNF
432-387
The Small Double Cam Grip is designed for holding components into which the serrated faces can bite into the material and secure tightly eg. insulated cables and wire.
The specimen is secured between the 2 cams, which self-tighten as a load is applied…
555
Accessory
Compression Plate, Self-levelling, Hardened & Ground, 70 mm, 5-16 UNC
432-350
Self-levelling compression plates are ideal for general compression testing on a range of materials and finished products. Self-levelling allows parallelism to be set for those applications where it is critical to accurately measure the deformation of a…
556
Accessory
3/8" Upper Chuck Assembly for use on Helixa sensors
432-615
A standard self-centering 3-jaw chuck with key.
It has a maximum ⅜" (9.5 mm) opening and is connected to the Helixa torque sensor via an adaptor with female ⅜" square hole.
Used to secure a variety of test specimens for torque applications of 1.5 - 10…
557
Accessory
Padded Radiused Probe, 500 N, 5-16 UNC
432-414
The Padded Radiused Probe is used with a short extension rod to connect to a digital force gauge to measure tension and compression.
It has a thin layer of rubber and is specially designed for use in manual handling and ergonomic assessment applications…
558
Accessory
Eccentric Roller Grip - Pyramid (serrated) roller, 10 kN, QC-20 fitting
Mec7-10
MEC7-10 Eccentric Cam Grip
Fitted with a pyramid-faced serrated 60mm wide roller cam. As a load is applied to a specimen the cam self-tightens , spreading the load evenly.
The lever allows for quick insertion and release of specimen to reduce testing…
559
Accessory
U-form Pneumatic Vice Grip - Single Action, 2.5 kN, 18 mm opening, pair, QC-20 fitting
Mec240g+Ko
MEC 240g +kO (body only) :
A pair of pneumatically-operated, Single-action U-form Vice Grips with an opening of 0-18mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manual jaw holder + 1 x 70 mm diameter pneumatic…
560
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 52 mm opening, pair, QC-20 fitting
Mec240k-S50+Ko
MEC 240k- S50+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-52mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic…
561
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 10 mm opening, pair, QC-20 fitting
Mec240k+2Ko
MEC 240k +2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-10mm depending on the jaw types selected (sold separately).
Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
562
Accessory
Webbing Grip, 2 kN, QC-20 fitting
432-269
Webbing Grips are designed for tensile testing of high strength belts and tapes below 2 kN.
The sample is wound around the knurled roller and then around the smooth roller. As load is applied, the smooth roller moves in the slot to secure tightly…
563
Accessory
Lever-operated Cam Grip (large serrated), 500 N, 10-32 UNF
432-047
The Large Lever-operated Cam Grip is fitted with a 10-32 UNF female thread and supplied with a male grub-screw. It is designed with a plated 70mm wide roller cam to self-tighten as a load is applied to a sample, spreading the load evenly. The lever also…
564
Accessory
Wedge Grip (small), 500 N, 10-32 UNF
432-385
The small, lightweight Wedge Grip is ideal for tensile testing below 500 N.
A spring-loaded lever ensures the serrated jaws (16mm wide x 20mm high) are easy to open for fast securing and release of samples. As load is applied, the self-tightening action…
565
Accessory
Compression Plate, Self-levelling, Hardened & Ground, 50 mm, 10-32 UNF
432-349
Self-levelling compression plates are ideal for general compression testing on a range of materials and finished products. Self-levelling allows parallelism to be set for those applications where it is critical to accurately measure the deformation of a…
566
Accessory
3/8" Lower Chuck Assembly for use on Helixa motor spindle
432-614
A standard self-centering 3-jaw chuck with key.
It has a maximum ⅜" (9.5mm) opening and is connected to the Helixa motor-drive spindle via an adaptor with quick-release grub-screw.
Used to secure a variety of test specimens for torque applications.
567
Accessory
Peg Hook, 50 N, 10-32 UNF
432-399
The Peg Hook is fitted with 10-32 UNF female thread and supplied with a male grub-screw. It is designed for use in low-load applications where a small 'eyelet' needs to be held. The angled peg is ideal for quick and easy securing of the eyelet.
568
Accessory
U-form Pneumatic Vice Grip - Single Action, 5 kN, Pair, QC-20 fitting
Mec83
MEC 83 (body only) :
A pair of pneumatically-operated, Single-action U-form Vice Grips with a standard opening of 0-10mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manually-adjusted jaw holder + 1 pneumatic piston…
569
Accessory
U-Form Pneumatic Vice Grip - Double Action, 2.5 kN, 18 mm opening, pair, QC-20 fitting
Mec240g+2Ko
MEC 240g +2kO (body only) :
A pair of pneumatically-operated, Double-action U-form Vice Grips with an opening of 0-18mm depending on the jaw types selected (sold separately).
Each grip is fitted with 2 x 70 mm diameter pneumatic pistons, which allow…
570
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 52 mm opening, pair, QC-20 fitting
Mec240k-S50+2Ko
MEC 240k- S50+2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-52mm depending on the jaw types selected (sold separately). Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
571
Accessory
U-form Pneumatic Vice Grip - Single Action, 2.5 kN, 18 mm opening, pair, QC-20 fitting
Mec240g+Ko
MEC 240g +kO (body only) :
A pair of pneumatically-operated, Single-action U-form Vice Grips with an opening of 0-18mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manual jaw holder + 1 x 70 mm diameter pneumatic…
572
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 52 mm opening, pair, QC-20 fitting
Mec240k-S50+Ko
MEC 240k- S50+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-52mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic…
573
Accessory
Spring-Loaded Fold Grip, 2 kN, QC-20 fitting
432-262
Fitted with a 45mm wide roller cam having a cross-hatch knurled surface. The roller closes onto a serrated contact face of the grip body.
The specimen is folded around the knurled roller to give maximum contact area. As a load is applied to the…
574
Accessory
Heavy-duty Pneumatic Plane Grips - pyramid-faced jaws, 5 kN, Pair, QC-20 fitting
432-374
A pair of pneumatically-operated, single-action Heavy-duty Pneumatic Plane Grips with an opening of 0-12 mm.
Each 40mm high x 76mm wide jaw is fitted with a pyramidal surface to secure specimens tightly. The specimen is held between the fixed jaw and…
575
Accessory
Sequin Pull-off Fixture, 50 N
432-291
The sample fabric is typically held in a separate 'grab test' textile fixture (432-323) mounted to the anvil plate. The sequin or other small appliqué is then clamped in the serrated jaw of a pair of 'Kelly' clamping forceps. This is then placed over a…