Search results
601
[Page extract]
Standards and best practices
BS EN ISO 8670-2 specifies methods for testing pressurised containers, including procedures for determining the pressure at which a container fails. It ensures testing is consistent, repeatable, and conducted safely.
602
Accessory
Rubber jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 30 mm
Mec240k-BG
Rubber-faced Jaws (30mm x 30mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = see datasheet for various spans according to the grip body selected.
For fragile samples, which may get weakened by pinching at the contact-…
603
Accessory
Diamond coated jaws for Mec240k Medium Vice Grip, 30 x 30 mm
Mec240k-BD
Diamond Jaws (30mm x 30mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = see datasheet for various spans according to the grip body selected.
For materials which need a “bite” to secure a good grip (e.g. soft…
604
Case study
Medical suture device calibration system
Requirement
A number of devices which 'crimp' a curved needle to a fine medical thread needed to be tested. The crimp force was applied horizontally pulling a lever on the device.
605
Accessory
Charger for touchscreen digital gauges, USA, USB-A, USB-C, 2-pin flat
304-072
For use with Mecmesin touchscreen digital force and torque gauges. With 2 flat pins. Commonly used in the USA.
The mains adaptor/charger is a USB-A, USB-C type:
Input: 100-240V~50/60Hz 0.5A
Output-C: 5.0V=3.0A; 9.0V=2.22A; 12.0V=1.5A
Output-A: 3.6-6.…
606
Case study
Test del giocattolo secondo gli standard di sicurezza della resistenza dell'attrezzatura
Requisiti Il cliente fornisce articoli da regalo di peluche a rivenditori come Clinton.
607
Accessory
1/2" upper chuck assembly for use on Helixa sensors (3 N.m & 6 N.m only)
432-617
A standard self-centering 3-jaw chuck with key.
It has a maximum ½" (12.7 mm) opening and is connected to the Helixa torque sensor via an adaptor with female ⅜" square hole.
Used to secure a variety of test specimens for torque applications of 1.5 - 10…
608
Accessory
Pyramid jaws for Mec11-20 Scissor Grip, 10 kN, 25 x 100 mm
Mec11-20-BP100
Pyramid Jaws (25mm high x 100mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall. By using 100 mm width jaws tensile force is reduced to 10kN.
For materials which need a “bite” to secure a good grip (e.g. soft metals {…
609
Case study
Resistenza alla perforazione del contenitore per oggetti taglienti
Esempio di ingegneria personalizzato Gli standard internazionali (ASTM F2132, BS 7320) specificano la resistenza alla perforazione dei contenitori per oggetti medici taglienti.
610
Accessory
Cable Cam grip for CrimpTest-1 kN
432-660
Cable Cam Grip for CrimpTest-1 Tester (supplied as standard with the Tester)
The Cable Cam Grip is designed for holding insulated cables and wire when tensile testing the pull strength of terminals up to 1 kN.
The cable is secured by the serrated cam,…
611
Accessory
Diamond coated jaws for Mec240k Medium Vice Grip, 30 x 80 mm
Mec240k-BD80
Diamond Jaws (30mm x 80mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = see datasheet for various spans according to the grip body selected.
For materials which need a “bite” to secure a good grip (e.g. soft…
612
Case study
Child safety - force to extract lighter
Requirement
The customer manufactures lighters and is currently developing a case/guard designed to increase the safety for children.
613
Case study
Test di rimozione del cappuccio della fiala di plastica
Requisiti Il cliente si è rivolto a Mecmesin con una specifica per togliere il tappo di una fiala farmaceutica. L'attrezzatura di prova doveva essere semplice da usare e in grado di eseguire test ripetibili.
614
Accessory
Digital Height Scale and Brackets for LCP/S Test Stand
432-162 V01
Digital Height Scale and Brackets for mounting to the lever-operated Manual Test Stand model LCP/S.
The digital display of the height-scale is fixed to the moving crosshead of the test stand so that it's displacement can be monitored. This is often…
615
Accessory
Large Single-action Vice Grip, wave-form, 2 kN, QC-20 fitting
432-267-V02
A Large Single-action Vice Grip featuring one fixed jaw and one jaw as freely adjustable to mechanically clamp the specimen in place.
Rated to 2 kN in tension with wave-form jaws of 78mm wide x 28mm high having an opening of 0 - 6.5 mm. Provides…
616
Case study
Test di resistenza alla trazione della pagina
Requisiti Mecmesin ha collaborato con un cliente per progettare e sviluppare un sistema di misurazione della forza per determinare la forza adesiva di rilegatura dei libri nel trattenere singole pagine.
617
Accessory
Pyramid jaws for Mec11-20 Scissor Grip, 10 kN, 25 x 100 mm
Mec11-20-BP100
Pyramid Jaws (25mm high x 100mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall. By using 100 mm width jaws tensile force is reduced to 10kN.
For materials which need a “bite” to secure a good grip (e.g. soft metals {…
618
Accessory
Rubber jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 80 mm
Mec240k-BG80
Rubber-faced Jaws (30mm x 80mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = see datasheet for various spans according to the grip body selected.
For fragile samples, which may get weakened by pinching at the contact-…
619
Accessory
Charger for touchscreen digital gauges, Europe, USB-A, USB-C, 2-pin round
304-067
For use with Mecmesin touchscreen digital force and torque gauges. With 2 round pins. Commonly used in the Europe.
The mains adaptor/charger is a USB-A or USB-C type:
Input: 100-240V~50/60Hz 0.5A
Output-C: 5.0V=3.0A; 9.0V=2.22A; 12.0V=1.5A
Output-A: 3…
620
[Page extract]
Introduction to compressibility and recovery testing
Compressibility and recovery testing measures how a material behaves under load and how effectively it returns to its original form once the load is removed.
621
Accessory
FPT COF sled 200g (foam) for ASTM D1894 and ISO 8295
432-638
A foam-faced sled with magnetic grips, for testing coefficient of friction of plastic film samples to ASTM D1894 and ISO 8295. Supplied with rigid and extensible links.
For use on the FPT-H1 Friction Tester.
622
Accessory
Diamond coated jaws for Mec240k Medium Vice Grip, 30 x 50 mm
Mec240k-BD50
Diamond Jaws (30mm x 50mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = see datasheet for various spans according to the grip body selected.
For materials which need a “bite” to secure a good grip (e.g. soft…
623
Accessory
Charger for digital gauges, USA, 110 V/115 V, 2-pin flat
304-006
For use with Mecmesin digital force and torque gauges. 110 Volt with 2 flat pins. Commonly used in USA, Canada, Mexico and Japan.
The mains adaptor/charger is a constant-current type:
Primary circuit: 110V – 50-60Hz
Secondary circuit: 100mA constant…
624
[Page extract]
Standards and guidelines
Accurate and comparable cleavage strength testing depends on following recognised international standards.
625
Case study
Metal bottle cap on glass pull-off test
Customised engineering example
Gripping the base of a glass bottle for a tensile test can be challenging due to the slippy surface and contoured shape.