Search results
601
Accessory
Diamond coated jaws for Mec240k Medium Vice Grip, 30 x 50 mm
Mec240k-BD50
Diamond Jaws (30mm x 50mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = see datasheet for various spans according to the grip body selected.
For materials which need a “bite” to secure a good grip (e.g. soft…
602
[Page extract]
Introduction to compressibility and recovery testing
Compressibility and recovery testing measures how a material behaves under load and how effectively it returns to its original form once the load is removed.
603
Accessory
Rubber jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 50 mm
Mec240k-BG50
Rubber-faced Jaws (30mm x 50mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = see datasheet for various spans according to the grip body selected.
For fragile samples, which may get weakened by pinching at the contact-…
604
Accessory
Square Perforated Aluminium Compression Plate, 150 x 150 mm, QC-20 or QC-32 fitting
Mec36L-150-L6x20
MEC36L-150-L6x20
Square Compression Plate in aluminium featuring perforations to allow air release during testing - suitable for foam testing. Holes are 6mm diameter and spaced at 20mm intervals.
Dimensions: 150mm x 150mm
Fitted with QC-20mm or 32mm…
605
Accessory
Dual Footswitches (non-locking type) for pneumatic grips
Mec205-1
Pneumatic grips are the ideal choice when performing tensile tests on sensitive materials that have a tendency to slip or break at point of clamping.
Mec205-1:
Non-locking dual footswitches open the jaws of the pneumatic grip by pressing the foot pedal…
606
Case study
Train door safety override testing
Customised engineering example
A UK train operator needed a method of testing how sensitive are the carriage sliding doors to detecting an obstacle when closing or opening.
607
[Page extract]
Torque testing methods and equipment
Equipment used
Strip torque testing can be carried out using:
608
Accessory
Blank (smooth) Inset Jaws for MEC9 Thin Wire Grip, 2.5 kN
Mec9-EB
MEC9-EB Blank Jaws
Blank (smooth) inset jaws of 37 mm height x 15 mm width, 0.5 set. For fitting into the carrier of the MEC9 Thin Wire Grip.
Used when jaws require a specific surface to be machined onto them. Alternatively for affixing an abrasive…
609
Accessory
Dual Footswitches (non-locking type) for pneumatic grips
Mec205-1
Pneumatic grips are the ideal choice when performing tensile tests on sensitive materials that have a tendency to slip or break at point of clamping.
Mec205-1:
Non-locking dual footswitches open the jaws of the pneumatic grip by pressing the foot pedal…
610
Case study
Tester della forza di sbattimento della porta scorrevole del treno
Requisiti È stato specificato un dispositivo portatile per testare la forza richiesta per attivare il dispositivo di sicurezza integrato quando le porte automatiche si chiudono sui treni.
611
Accessory
Mini V-block, for Orbis & Tornado
432-423
The Mini V-block is a precision-engineered vice assembly which allows smaller specimens to be securely held in a centrally-aligned position, without excessive clamping force.
Supplied with V-shape, rubber-coated, interlocking jaws with an opening span…
612
Accessory
Diamond coated jaws for Mec240k Medium Vice Grip, 30 x 100 mm
Mec240k-BD100
Diamond Jaws (30mm x 100mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = see datasheet for various spans according to the grip body selected.
For materials which need a “bite” to secure a good grip (e.g. soft…
613
Accessory
Rubber jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 100 mm
Mec240k-BG100
Rubber-faced Jaws (30mm x 100mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = see datasheet for various spans according to the grip body selected.
For fragile samples, which may get weakened by pinching at the contact…
614
Case study
Peel test delle carte d'identità
Requisiti Il cliente produce carte d'identità con una copertina laminata. Il cliente voleva sapere che l'adesivo usato per incollare il laminato e la carta era abbastanza forte da resistere a un alto tasso di utilizzo quotidiano.
615
Case study
Injection moulded assembly integrity
Customised engineering example
Plastic injection-moulded subassemblies are often clipped or welded together, and the integrity of the whole must be tested at several points.
616
Case study
Child safety - force to extract lighter
Requirement
The customer manufactures lighters and is currently developing a case/guard designed to increase the safety for children.
617
[Page extract]
Selecting compression testing equipment
Choosing the right testing system is critical for accurate and repeatable results. Factors such as force range, sample type and testing throughput influence equipment selection.
618
Accessory
Diamond coated jaws for Mec240k Medium Vice Grip, 30 x 30 mm
Mec240k-BD
Diamond Jaws (30mm x 30mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = see datasheet for various spans according to the grip body selected.
For materials which need a “bite” to secure a good grip (e.g. soft…
619
Accessory
Charger for touchscreen digital gauges, USA, USB-A, USB-C, 2-pin flat
304-072
For use with Mecmesin touchscreen digital force and torque gauges. With 2 flat pins. Commonly used in the USA.
The mains adaptor/charger is a USB-A, USB-C type:
Input: 100-240V~50/60Hz 0.5A
Output-C: 5.0V=3.0A; 9.0V=2.22A; 12.0V=1.5A
Output-A: 3.6-6.…
620
Accessory
Upper Precision Fixing Plate for Helixa sensors
432-601
Precision Upper Fixing Plate for Helixa.
Mounts onto the square-drive of Helixa torque sensors. Fitted with a precision leadscrew and sprung-loaded runners into which jaws or holding pegs can be inserted (order separately). Tighten the knob to secure…
621
Accessory
90-degree Peel Jig for FPT-H1
432-620
This 90-degree Peel Jig fits to the FPT-H1 for 90 degree peel testing of pressure sensitive tapes and labels in accordance with international standards.
FINAT FTM2, ASTM D330. PSTC 101 Method F.
It accepts interchangeable float glass and stainless steel…
622
Case study
Medical suture device calibration system
Requirement
A number of devices which 'crimp' a curved needle to a fine medical thread needed to be tested. The crimp force was applied horizontally pulling a lever on the device.
623
Accessory
Rubber jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 30 mm
Mec240k-BG
Rubber-faced Jaws (30mm x 30mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = see datasheet for various spans according to the grip body selected.
For fragile samples, which may get weakened by pinching at the contact-…
624
Accessory
Pyramid jaws for Mec11-20 Scissor Grip, 10 kN, 25 x 100 mm
Mec11-20-BP100
Pyramid Jaws (25mm high x 100mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall. By using 100 mm width jaws tensile force is reduced to 10kN.
For materials which need a “bite” to secure a good grip (e.g. soft metals {…
625
Accessory
Charger for touchscreen digital gauges, Europe, USB-A, USB-C, 2-pin round
304-067
For use with Mecmesin touchscreen digital force and torque gauges. With 2 round pins. Commonly used in the Europe.
The mains adaptor/charger is a USB-A or USB-C type:
Input: 100-240V~50/60Hz 0.5A
Output-C: 5.0V=3.0A; 9.0V=2.22A; 12.0V=1.5A
Output-A: 3…