Search results
2001
Accessory
Radiused Probe - 8 mm, 500 N, 10-32 UNF
432-354
Radiused Probes are used to perform penetration or puncture tests on a wide range of products.
Aspects measured include firmness and ripeness of cosmetics, medical gels and foodstuffs.
6mm diameter at the tip rising to 8mm outer diameter of the probe.…
2002
Accessory
Sample cutter 25 mm wide
PSV13143
Sample cutter 25mm wide - for preparing peel and tensile samples of film/paper.
Includes spare blades and hardened protective mat on which specimens can be cut.
2003
Accessory
Fabric Grip, 200 N, 10-32 UNF
432-386
Fabric grips are designed for tensile and elongation testing of fabric and thin materials below 200N.
Material is gripped between two smooth spring-loaded faces which are clamped together by two locking nuts at either side of the grip to ensure the…
2004
Accessory
Interface cable, AFG/AFTI (2006-now) to MultiTest-d / Vortex-d, RS232 & Control
351-074
Connects AFG/AFTI to MultiTest-d (data comms…
2005
Accessory
Parallel Jaw Grip, 500 N, 10-32 UNF
432-396
Parallel Jaw Grips are designed for tensile testing up to 500N of thin flat components and materials, which require secure gripping over an extended surface area.
Star handles allow jaw positions to be adjusted to ensure central loading during tensile…
2006
Accessory
Interface cable, MultiTest-dV / Vortex-dV, USB
351-093
Interface cable connects MultiTest-dV or Vortex-dV to a PC for data-transfer to VectorPro Lite software.
Comprises USB-B to USB-A connectors.
2007
Accessory
Lightweight Vice Grip - Double Action, 100 N, Opening 0-8mm, 10-32 UNF
Mec227
MEC 227 (body only):
A Lightweight Vice Grip providing free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
Rated to 100 N in tension with an…
2008
Accessory
Cone Probe, perspex, 45 degrees, M3
432-081
A perspex conical probe with 45° angle. Cone penetrometry is traditionally used within cosmetics and food products to assess hardness and spreadability. Also applicable for testing biscuits and other similar brittle products. Commonly used with extension…
2009
Test Frame
MultiTest-dV test frame
MultiTest-dV test frame
A ballscrew-driven motorised test frame designed to apply tension and compression from 2 N right up to a capacity of 2.5 kN (550 lbf).Its versatile construction makes it perfectly suited for testing all kinds of components in a…
2010
Accessory
MDD Horizontal Feet Kit
432-126
Feet for the horizontal operation of an MDD manual test stand. Supplied as a pair.
2011
Accessory
Test Hook (small), 50 N, M6
432-171
Small Fixed Hook fitted with M6 female thread. Used for general purpose tension tests.
2012
Accessory
Compression Plate, Hardened and Ground, 50 mm, M6
432-197
Hardened and ground compression plates have a smooth, scratch-proof surface ideal for compression testing on samples that could damage a standard compression plate, such as springs.
50mm diameter having M6 female thread.
2013
Accessory
QC Type B Adapter, 20 mm F to M12 fixing bolt, c/w pin
432-283
QC Female Sleeve c/w cross-pin with M12 Fixing Bolt:
Converts a non-QC type grip into a QC type for quick interchange of grips. Fits to loadcells with M12 female thread (eg. ILC-S 2500N and ILC-S 5000N).
2014
Accessory
Mandrel Peg Drive, 54 mm
PDV15094-A
This fixture is connected to the torque sensor of the Vortex or Helixa. It has 4 metal pegs with an internal opening of 54 mm into which the single-form mandrel can be positioned. The pegs drive the mandrel and thereby apply the tightening and release…
2015
Accessory
Adapter, 500N, M6 to M6, F to F
432-334
Female-to-female Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
2016
Accessory
Compression Plate, Nickel-plated, Vented by Slots & Flat, 50 mm, 10-32 UNF
432-346
Vented compression plates are ideal for top-load/crush testing of containers such as PET bottles.
Slots in the plate allow the passage of air to ensure that air inside the bottle is not compressed thereby falsifying the true measurement of the top-load…
2017
Accessory
Sample cutter 15 mm wide
PSV13007
Sample cutter for preparing peel and tensile samples of film/paper. Adjustable blade spacing upto 70 mm, or quickly set at 15 mm or 1 inch wide with the width adjustment block.
Includes spare blades, width adjustment block and hardened protective mat on…
2018
Accessory
Fabric Grip, 100 N, 10-32 UNF
432-384
Fabric grips are designed for tensile and elongation testing of fabric and thin materials below 100N.
Material is gripped between two smooth spring-loaded faces which are clamped together by two locking nuts at either side of the grip to ensure the…
2019
Accessory
Interface cable, AFG/AFTI (2006 - now) or Tornado (2008 - now) to PLC
351-063
Connects AFG, AFTI or Tornado for data comms to a Programmable Logic Controller. Comprises 15-pin female D-connector to twin screened wires.
2020
Accessory
Small Parallel Grip, 500 N, 10-32 UNF
432-394
Small Parallel Grips are designed for tensile testing of small flat components and materials below 500N.
A floating ball screw attachment ensures central loading during tensile testing and wing screws are used to quickly position the jaws.
Jaw faces…
2021
Accessory
Multi-Jaw Grip, 500 N, 10-32 UNF
432-420
Used in tension tests the Multi-Jaw Grip is for holding round and irregularly shaped specimens by clamping on the outer surface or under a 'head'.
By turning the body of the grip the claw-type jaws can be opened and closed to get a secure grasp on a…
2022
Accessory
Extension Rod, 130 mm with thumbwheel, 2.5 kN, 5-16 UNC
432-123
130mm long Extension Rod 5-16 UNC female to 5-16 UNC male. Fitted with knurled thumbwheel for locking accessory in correct orientation.
2023
Accessory
Test Hook (medium), 500 N, M6
432-169
Medium Fixed Hook fitted with M6 female thread. Used for general purpose tension tests.
2024
Accessory
Adapter, 500N, 10-32 to M6
432-193
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
10-32 UNF male thread to M6 threaded hole
2025
Test Frame
OmniTest test frame (twin column)
OmniTest test frame
A motorised test frame driven by twin ballscrews featuring dual-columns and designed to apply tension and compression from 2 N right up to a capacity of 50 kN (11000 lbf).Its versatile construction makes it perfectly suited for testing…