Search results
826
Accessory
1/2" upper chuck assembly for use on Helixa sensors (3 N.m & 6 N.m only)
432-617
A standard self-centering 3-jaw chuck with key.
It has a maximum ½" (12.7 mm) opening and is connected to the Helixa torque sensor via an adaptor with female ⅜" square hole.
Used to secure a variety of test specimens for torque applications of 1.5 - 10…
827
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 10 mm opening, pair, QC-20 fitting
Mec240k+Ko
MEC 240k +kO (body only) :
A pair of pneumatically-operated, Single-action Medium Vice Grips with an opening of 0-10mm depending on the jaw types selected (sold separately).
Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic…
828
Accessory
Coefficient of Friction (COF) kit to ISO 15359 for FPT-H1
432-639
Integrated kit for use on the FPT-H1 Friction Tester to enable paper and card coefficient of friction testing to ISO 15359.
Comprises:
- a neoprene-faced sled with magnetic grips
- servo-assisted device for raising and lowering of friction sled
- guide…
829
Accessory
Cable Cam grip for CrimpTest-1 kN
432-660
Cable Cam Grip for CrimpTest-1 Tester (supplied as standard with the Tester)
The Cable Cam Grip is designed for holding insulated cables and wire when tensile testing the pull strength of terminals up to 1 kN.
The cable is secured by the serrated cam,…
830
Accessory
Cone Probe, perspex, 45 degrees, M3
432-081
A perspex conical probe with 45° angle. Cone penetrometry is traditionally used within cosmetics and food products to assess hardness and spreadability. Also applicable for testing biscuits and other similar brittle products. Commonly used with extension…
831
Accessory
Compression Plate, Self-levelling, Hardened & Ground, 70 mm, 5-16 UNC
432-350
Self-levelling compression plates are ideal for general compression testing on a range of materials and finished products. Self-levelling allows parallelism to be set for those applications where it is critical to accurately measure the deformation of a…
832
Accessory
Floating Peel Jig (ISO 10373-1), 500 N, 10-32 UNF
432-413
The Floating Peel Jig is used to test the peel strength between adhesive layers of flat, rigid samples such as credit cards.
A portion of the top layer is placed between the rollers and held in an upper grip (order separately). As load is applied the…
833
Accessory
Wood Shear Test Jig, 25 kN, QC-20 or QC-32 fitting
Mec17
Wood Shear Tester DIN 52367, with torque-free shearing for wood samples according to ISO 6238, EN 392 and for glued laminated timber to BS 373. ASTM D143 version also available.
Connects to test stand and loadcell via QC 20mm or 32mm fixings. Please…
834
Accessory
U-form Pneumatic Vice Grip - Single Action, 2.5 kN, 18 mm opening, pair, QC-20 fitting
Mec240g+Ko
MEC 240g +kO (body only) :
A pair of pneumatically-operated, Single-action U-form Vice Grips with an opening of 0-18mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manual jaw holder + 1 x 70 mm diameter pneumatic…
835
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 52 mm opening, pair, QC-20 fitting
Mec240k-S50+Ko
MEC 240k- S50+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-52mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic…
836
Accessory
Small Pinch Grip, 200 N, 10-32 UNF
432-280
Pinch grips are lightweight miniature vice grips, which use a hinge action to clamp a sample and a wing nut to tighten the jaw face.
Each 10 mm x 10 mm jaw face has a slight groove to help to hold the sample securely, yet avoid inducing a break within…
837
Accessory
Large Single-action Vice Grip, rubber-faced, 2 kN, QC-20 fitting
432-267-V01
A Large Single-action Vice Grip featuring one fixed jaw and one jaw as freely adjustable to mechanically clamp the specimen in place.
Rated to 2 kN in tension with rubber-faced jaws of 78mm wide x 28mm high having an opening of 0-9mm. Provides excellent…
838
Accessory
Compression Plate, Self-levelling, Hardened & Ground, 50 mm, 10-32 UNF
432-349
Self-levelling compression plates are ideal for general compression testing on a range of materials and finished products. Self-levelling allows parallelism to be set for those applications where it is critical to accurately measure the deformation of a…
839
[Page extract]
Understanding TAPPI T 809 standard
TAPPI T 809 is an internationally recognised method for determining the flat crush resistance of corrugated medium.
840
[Page extract]
Testing standards and guidelines
Tension and compression tests are governed by international standards that ensure comparability and regulatory compliance:
841
[Page extract]
Essential standards for pull-off and pull-out testing
International standards provide consistent methods and equipment requirements for these tests:
842
[Page extract]
Standards and compliance
International standards ensure penetration and puncture testing is performed consistently for reliable and comparable results.
Key examples include:
843
[Page extract]
Standards and compliance
International standards ensure penetration and puncture testing is performed consistently for reliable and comparable results.
Key examples include:
844
[Page extract]
Standards and regulations in shear testing
Several industry standards and protocols govern food shear testing, ensuring repeatable results and regulatory compliance. Examples include:
845
Sensor
Torque Sensors (ETS)
Torque sensors
The Enhanced Torque Sensors (ETS) range of interchangeable torque sensors are specially adapted for the HelixaPro and VortexPro test systems.
Plug and play for automatic calibration with availability to suit all requirements in capacities…
846
Case study
Test di resistenza di ancoraggio delle radici per resistenza all'alloggio
Requisiti
Un'università olandese di spicco voleva migliorare la resa e la qualità di una coltura di cereali senza glutine chiamata Teff (Eragrostistef). Il teff è un grano antico che proviene dall'Etiopia ed è ora coltivato in Europa.
847
Event
Needle Sharpness & Puncture Resistance Testing
Hypodermic needles are tested to determine how their design influences the ease of insertion into the skin in order to prevent patient pain and skin trauma.
848
Event
Tensile Testing: Basics, Tips and Trends
Have you ever wondered if the seatbelt in your vehicle is strong enough to restrain you in a collision? How about the average person pulling the cork out of a wine bottle?
849
[Page extract]
BS EN 13942
This International Standard specifies requirements and provides recommendations for the design, manufacturing, testing and documentation of ball, check, gate and plug valves for application in pipeline systems meeting the requirements of ISO 13623 for t
850
Event
Medical Devices – Syringe & Needle Testing Fundamentals
Vial sealing is a critical step in the process of ‘fill and finish’ operations for vaccines and medications, as it defines the seal quality of the final product, ensuring sterility and preventing leakage.