Search results
1076
Accessory
Small Single-action Vice Grip, 200 N, QC-20 fitting
432-264
A general-purpose Single-action Vice Grip.
Ideal for testing low force flat specimens. The open side design facilitates easy loading of thin, non-rigid samples, which are clamped in place.
Fitted with 30 mm x 30 mm flat-faced jaws and rated to 200 N in…
1077
Accessory
Spring-action Vice Clamp, 200 N, 10-32 UNF
432-381
Spring-action Vice Clamp is fitted with adjustable serrated interlocking jaws to effectively grip specimens for tensile testing up to 200 N.
Ideal for gripping up to 16mm wide strips of film, paper, labels, tape and other thin materials for tensile and…
1078
Accessory
Cable Cam Grip (smooth), 1 kN, 10-32 UNF
432-404
Cable Cam Grip - smooth, small
Designed for holding insulated cables and wire. The specimen is secured by the cam, which self-tightens as load is applied and spreads the load evenly.
Smooth cams are preferable for materials where a serrated cam may bite…
1079
Accessory
Large Double-action Vice Grip, 5 kN, QC-20 fitting
432-433
The Large Double-action Vice Grip provides free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
It has a Tommy-bar handle on one side for rapid…
1080
Accessory
U-Form Vice Grip - Double Action, 5 kN, 50 mm opening, QC-20 fitting
Mec240g-S50
MEC 240g-S50 (body only):
A U-form Vice Grip providing free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
The ‘U-Form’ cut into the aluminium…
1081
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 30 mm opening, pair, QC-20 fitting
Mec240k-S30+2Ko
MEC 240k- S30+2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-30mm depending on the jaw types selected (sold separately). Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
1082
Accessory
Square Perforated Aluminium Compression Plate, 200 x 200 mm, QC-20 or QC-32 fitting
Mec36L-200-L6x20
MEC36L-200-L6x20
Square Compression Plate in aluminium featuring perforations to allow air release during testing - suitable for foam testing. Holes are 6mm diameter and spaced at 20mm intervals.
Dimensions: 200mm x 200mm.
Fitted with QC-20mm or 32mm…
1083
Accessory
Square Perforated Aluminium Compression Plate, 150 x 150 mm, QC-20 or QC-32 fitting
Mec36L-150-L6x20
MEC36L-150-L6x20
Square Compression Plate in aluminium featuring perforations to allow air release during testing - suitable for foam testing. Holes are 6mm diameter and spaced at 20mm intervals.
Dimensions: 150mm x 150mm
Fitted with QC-20mm or 32mm…
1084
Accessory
Pinch Grip, 2 kN, QC-20 fitting
MecS470
The 2 KN Pinch Grip is fitted with 25mm high x 25mm wide pyramid jaw faces to ensure samples are held securely for tensile tests below 2 kN.
One jaw is fixed and the other jaw is on a spring-loaded hinge which opens to 10mm. Fast installation and…
1085
Accessory
Thin Wire Grip with carrier for inset jaws, 2.5 kN, QC-20 fitting
Mec9
MEC9 Thin Wire Grip
Designed to hold wires or cords when tensile testing up to 2.5 kN.
The specimen is initially wrapped around a bollard and then secured by manually clamping between either blank or diamond-coated jaws. The Mec9 is supplied with the…
1086
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 10 mm opening, pair, QC-20 fitting
Mec240k+Ko
MEC 240k +kO (body only) :
A pair of pneumatically-operated, Single-action Medium Vice Grips with an opening of 0-10mm depending on the jaw types selected (sold separately).
Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic…
1087
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 52 mm opening, pair, QC-20 fitting
Mec240k-S50+2Ko
MEC 240k- S50+2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-52mm depending on the jaw types selected (sold separately). Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
1088
Accessory
Large Circular Bollard Grip, 2 kN, QC-20 fitting
432-271
The Large Circular Bollard Grips is made from steel and is designed for tensile testing up to 2 KN of flexible wire-type materials with a maximum specimen thickness width of 2 mm.
The specimen is wrapped around the bollard and the free end is clamped…
1089
Accessory
Wedge Grip (large), 5 kN, 5-16 UNC
432-398
The 5 kN Wedge Grip is ideal for tensile testing of flat and rigid materials, including plastics, rubber and light metals.
A spring-loaded lever ensures the serrated jaws (25mm wide x 32mm high) are easy to open for fast securing and release of samples…
1090
Accessory
Large Torque Saddle Plate
432-424
Saddle plates provide a more stable base on which to mount awkwardly-shaped samples.
Can be used on the 6 N.m Orbis and 6 N.m…
1091
Accessory
Lightweight Lower Chuck, for use on base of Helixa stand
432-509
Lightweight Lower Chuck for Helixa
A pin-chuck fitted with an adaptor for connection to the motor spindle of 'Helixa' motorised test stands.
Max.opening 3.2mm. Supplied with T-bar to allow easy opening and tightening
Used for holding components and…
1092
Accessory
U-Form Vice Grip - Double Action, 5 kN, 106 mm opening , QC-20 fitting
Mec240g-S100
MEC 240g-S100 (body only):
A U-form Vice Grip providing free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
The ‘U-Form’ cut into the…
1093
Accessory
Square Perforated Aluminium Compression Plate, 150 x 150 mm, QC-20 or QC-32 fitting
Mec36L-150-L6x20
MEC36L-150-L6x20
Square Compression Plate in aluminium featuring perforations to allow air release during testing - suitable for foam testing. Holes are 6mm diameter and spaced at 20mm intervals.
Dimensions: 150mm x 150mm
Fitted with QC-20mm or 32mm…
1094
Accessory
Lightweight Pneumatic Plane Grip, Single-action, 200 N, pair, QC-20 fitting
Mec94
A pair of versatile Lightweight Pneumatic Plane Grips especially suitable for holding a variety of materials where the tensile force may be low but the material is sensitive to damage or slippage when clamped.
The adjustable screw-driven rod allows…
1095
Accessory
Eccentric Roller Grip - Pyramid (serrated) roller, 5 kN, QC-20 fitting
Mec7-5
MEC7-5
Eccentric Cam Grip fitted with a pyramid-faced serrated 50mm wide roller cam. As a load is applied to a specimen the cam self-tightens , spreading the load evenly.
The lever allows for quick insertion and release of specimen to reduce testing…
1096
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 10 mm opening, pair, QC-20 fitting
Mec240k+2Ko
MEC 240k +2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-10mm depending on the jaw types selected (sold separately).
Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
1097
Accessory
V-jaw vice clamp, four jaws on screw-action adjuster, QC-20 fitting
432-678
432-678 is a vice fixture for mounting to the base of a test stand when performing tension and compression tests. It has four jaws, with two jaws being vertically spaced on either side. This provides increased stability by clamping at alternate heights on…
1098
Accessory
Small Circular Bollard Grip, 100 N, QC-20 fitting
432-270
The Small Circular Bollard Grips is made from aluminium and is designed for tensile testing up to 100 N of delicate, flexible specimens such as fine threads, wires and yarns, which may break easily when clamped.
The specimen is wrapped around the…
1099
Accessory
Upper Torque Fixing Table for Vortex stands
432-321
Upper Torque Fixing Table.
Offers highly versatile holding of specimens when torque testing. Fully adjustable between 10 - 78mm opening to accommodate a variety of forms.
Four rubber-coated, threaded pegs are supplied as standard which screw into…
1100
Accessory
Wire Grip, 500 N, 10-32 UNF
432-397
The Wire Grip is designed for tensile testing up to 500 N of flexible thin wires, which may break easily when clamped.
The specimen is wrapped around a grooved 19 mm diameter bollard and the free end is clamped tightly in place using a pair of friction…