Search results
476
Accessory
LTE 700 mm long travel extensometer2
432-700
Long Travel Extensometers (LTE) are designed to be used with Mecmesin test systems when running VectorPro MT materials testing software. They accurately measure strain directly from the test specimen to enable the most accurate calculation of the physical…
477
Accessory
Diamond coated jaws for Mec227 Lightweight Vice Grip, 250 N, 10 x 50 mm
Mec227-BD50
Diamond Jaws (10mm x 50mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = 0 - 8mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)…
478
Accessory
Pyramid (serrated) jaws for 20 & 50kN Wedge Grip, 50 x 35mm, 0 -13mm opening
Mec243-BP
Pyramid Jaws (50mm high x 35mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Jaw opening = 4 - 16mm.
For flat specimens of materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft…
479
Accessory
Compression Plate - Hardened Steel, 25 kN, 246 mm, QC-20 fitting
Mec23-246-20-St
MEC23-246-20-St :
Round compression plate in hardened steel featuring concentric circles for helping operators to place samples centrally. Suitable for hard specimens such as metals, hard plastics, small stones and granules.
246mm diameter.
Fitted…
480
Accessory
Diamond coated jaws for Lightweight Pneumatic Plane Grip, 200 N, 25 x 50 mm
Mec94-BD50
Diamond Jaws (25mm high x 50mm wide) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = 0 - 20 mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and…
481
Accessory
Diamond coated jaws for Mec240g U-Form Vice Grip, 5 kN, 30 x 50 mm
Mec240g-BD
Diamond Jaws (30mm x 50mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = see datasheet for various spans according to the grip body selected.
For materials which need a “bite” to secure a good grip (e.g. soft…
482
Accessory
Sample cutter 25 mm wide
PSV13143
Sample cutter 25mm wide - for preparing peel and tensile samples of film/paper.
Includes spare blades and hardened protective mat on which specimens can be cut.
483
Accessory
Compression Plate - Hardened Steel, 25 kN, 196 mm, QC-20 fitting
Mec23-196-20-St
MEC23-196-20-St :
Round compression plate in hardened steel featuring concentric circles for helping operators to place samples centrally. Suitable for hard specimens such as metals, hard plastics, small stones and granules.
196mm diameter.
Fitted…
484
Accessory
Diamond coated jaws for Mec240k Medium Vice Grip, 30 x 30 mm
Mec240k-BD
Diamond Jaws (30mm x 30mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = see datasheet for various spans according to the grip body selected.
For materials which need a “bite” to secure a good grip (e.g. soft…
485
Accessory
Compression Plate Square, Hardened Steel, 196 x 196 mm, QC-20 or QC-32 fitting
Mec36-196-St
MEC36-196-St :-
Square compression plate in hardened steel featuring concentric circles for helping operators to place samples centrally. Also supplied with 4 fixing legs to support the weight of the steel plate. Suitable for hard specimens such as…
486
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 20 mm opening, pair, QC-20 fitting
Mec240k-S20+2Ko
MEC 240k- S20+2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-20mm depending on the jaw types selected. Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow the test specimen…
487
Accessory
Compression Plate Square, Hardened Steel, 100 x 100 mm, QC-20 or QC-32 fitting
Mec36-100-St
MEC36-100-St:
Square compression plate in hardened steel featuring concentric circles for helping operators to place samples centrally. Suitable for hard specimens such as metals, hard plastics, small stones and granules.
Dimensions: 100 x 100mm.…
488
Accessory
Puncture Test Fixture to EN ISO 14477, 500N, QC-20 fitting
MecS511
This EN ISO 14477 Puncture Test Fixture is for testing resistance strength in flexible packaging materials.
The specimen is clamped in the lower specimen holder, which is connected to the base plate of the test stand via a QC-20 female hole.
An upper '…
489
Accessory
Square Perforated Aluminium Compression Plate, 200 x 200 mm, QC-20 or QC-32 fitting
Mec36L-200-L6x20
MEC36L-200-L6x20
Square Compression Plate in aluminium featuring perforations to allow air release during testing - suitable for foam testing. Holes are 6mm diameter and spaced at 20mm intervals.
Dimensions: 200mm x 200mm.
Fitted with QC-20mm or 32mm…
490
Accessory
Touchscreen Controller for OmniTest Materials Testers
432-846
The Touchscreen Controller has been designed for use with the OmniTest range of Materials Testers as an alternative to a desktop or laptop PC. It provides full PC capability, operating with an embedded version of Windows 10, specifically optimised for and…
491
Accessory
Pyramid-form jaws for 50 kN Scissor Grip, 50 kN, 50 x 100 mm
Mec11-50-BP
Pyramid Jaws (50mm x 100mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
492
Accessory
Spring-loaded Pinch Grip with Chain Link, 10 N, QC-20 fitting
MecS205k
A Spring-loaded Pinch Grip designed for small-area contact (10mm x 10mm) to grip a delicate sample.
The sprung-loaded adjustable screw-mechanism allows an opening up to 3.4mm and acts in a pincer motion to secure specimens.
Fitted with a flexible chain…
493
Accessory
Rubber jaws for Mec83 U-Form Pneumatic Vice Grip, 5 kN, 60 x 200 mm
Mec83-BG200
Rubber-faced Jaws (60mm x 200mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0-10mm, 10-20mm or 20-30mm depending on which rod and piston are fitted to the Mec83 body.
For fragile samples, which may get weakened by…
494
Accessory
U-form Pneumatic Vice Grip - Single Action, 2.5 kN, 18 mm opening, pair, QC-20 fitting
Mec240g+Ko
MEC 240g +kO (body only) :
A pair of pneumatically-operated, Single-action U-form Vice Grips with an opening of 0-18mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manual jaw holder + 1 x 70 mm diameter pneumatic…
495
Accessory
Pinch Grip, 2 kN, QC-20 fitting
MecS470
The 2 KN Pinch Grip is fitted with 25mm high x 25mm wide pyramid jaw faces to ensure samples are held securely for tensile tests below 2 kN.
One jaw is fixed and the other jaw is on a spring-loaded hinge which opens to 10mm. Fast installation and…
496
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 10 mm opening, pair, QC-20 fitting
Mec240k+2Ko
MEC 240k +2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-10mm depending on the jaw types selected (sold separately).
Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
497
Accessory
Pyramid (serrated) jaws, 30 x 50 mm, 0.5 set
Mec240k-BP50
Pyramid Jaws (30mm x 50mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
498
Accessory
Wedge Grip, 10 kN, QC-20 fitting
MecS622
MecS622 (body only) :
Lever-action wedge grip with it's lever being positioned at the front for easy operation.
The open back of this wedge grip allows wider samples to be fitted, although still held across the central 34 mm width.
Supplied as body…
499
Accessory
Compression Plate, Nickel-Plated, 12 mm, 10-32 UNF
432-119
12mm nickel-plated compression plate fitted with 10-32 UNF female thread. Nickel-plated compression plates are resistant to rusting.
500
Accessory
Spring-Loaded Fold Grip, 2 kN, QC-20 fitting
432-262
Fitted with a 45mm wide roller cam having a cross-hatch knurled surface. The roller closes onto a serrated contact face of the grip body.
The specimen is folded around the knurled roller to give maximum contact area. As a load is applied to the…