Search results
626
Accessory
Square Perforated Aluminium Compression Plate, 400 x 400 mm, QC-20 or QC-32 fitting
Mec36L-400-L6x20
MEC36L-400-L6x20
Square Compression Plate in aluminium featuring perforations to allow air release during testing - suitable for foam testing. Holes are 6mm diameter and spaced at 20mm intervals.
Dimensions: 400mm x 400mm.
Fitted with QC-20mm or 32mm…
627
Accessory
Peel Grip for FPT-H1, 50 mm rubber-faced jaws, QC-8 fitting
432-654
This Peel Grip can be used in conjunction with the FPT-H1 90 degree peel fixture kit (part no. 432-620) or the FPT-H1 180 degree peel fixture kit (part no. 432-636). It is preferred over the standard hook fixture when the drawn part of the sample is non-…
628
Accessory
Diamond coated jaws for Mec240k Medium Vice Grip, 30 x 30 mm
Mec240k-BD
Diamond Jaws (30mm x 30mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = see datasheet for various spans according to the grip body selected.
For materials which need a “bite” to secure a good grip (e.g. soft…
629
Accessory
Split Mandrel for Stelvin aluminium closure, pneumatic
PDV14181
Suitable for Stelvin aluminium closures.
Pneumatically-operated chuck complete with half-round jaws with wire-eroded faces, for use with Vortex Upper Fixing Plate (432-321). Supplied with pneumatic valves and tubes.
Specify closure diameter when…
630
[Page extract]
Case examples
Tennis ball compression - Testing applies a standard load to measure deformation and rebound characteristics, ensuring consistent performance for bounce, speed, and control.
631
Case study
Forces d'insertion et de retrait de cosse électrique
Exemple d'ingénierie sur mesure
Les cosses électriques plate à oeillet, femelle ou à embout à sertir (également appelés «cosses plates») doivent offrir un ajustement ferme mais pratique.
632
Accessory
Split Mandrel for Stelvin aluminium closure, pneumatic
PDV14181
Suitable for Stelvin aluminium closures.
Pneumatically-operated chuck complete with half-round jaws with wire-eroded faces, for use with Vortex Upper Fixing Plate (432-321). Supplied with pneumatic valves and tubes.
Specify closure diameter when…
633
Accessory
Rubber jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 50 mm
Mec240k-BG50
Rubber-faced Jaws (30mm x 50mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = see datasheet for various spans according to the grip body selected.
For fragile samples, which may get weakened by pinching at the contact-…
634
Accessory
Charger for touchscreen digital gauges, Europe, USB-A, USB-C, 2-pin round
304-067
For use with Mecmesin touchscreen digital force and torque gauges. With 2 round pins. Commonly used in the Europe.
The mains adaptor/charger is a USB-A or USB-C type:
Input: 100-240V~50/60Hz 0.5A
Output-C: 5.0V=3.0A; 9.0V=2.22A; 12.0V=1.5A
Output-A: 3…
635
[Page extract]
Applications of compression testing
Compression testing is essential for product development, quality assurance and compliance. Its applications span a wide range of industries and material types.
636
Accessory
Co-efficient of Friction (COF) Sled for ASTM D1894 and ISO 8295, 200g (foam), FPT-H1
432-633
A neoprene-faced sled with magnetic grips, for testing coefficient of friction of paper samples to TAPPI T549. Supplied with rigid and extensible links.
For use on the FPT-H1 Friction Tester.
637
Accessory
Square Perforated Aluminium Compression Plate, 200 x 200 mm, QC-20 or QC-32 fitting
Mec36L-200-L6x20
MEC36L-200-L6x20
Square Compression Plate in aluminium featuring perforations to allow air release during testing - suitable for foam testing. Holes are 6mm diameter and spaced at 20mm intervals.
Dimensions: 200mm x 200mm.
Fitted with QC-20mm or 32mm…
639
Accessory
Cable tie break fixture for CrimpTest-1 kN
432-653
Cable-tie Break Fixture for CrimpTest-1
The Cable-tie Break Fixture comprises 2 split halves each having semi-circular stepped bollards for testing the tensile strength of cable-ties. There are 3 steps of 10 mm height steps to accommodate various length…
640
Accessory
Rubber jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 80 mm
Mec240k-BG80
Rubber-faced Jaws (30mm x 80mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = see datasheet for various spans according to the grip body selected.
For fragile samples, which may get weakened by pinching at the contact-…
641
Case study
Tests de pénétration de plaques de plâtre pour vérifier leur performance et leur durabilité
Exigence
Saint-Gobain (British Gypsum) sont des leaders dans la conception; production et distribution de matériaux pour la construction; industriels et grand public et sont le plus grand distributeur européen de matériaux de construction.
642
Case study
Tennis ball compression test
Requirement
The ITF (International Tennis Federation) invited Mecmesin to bid for a project to replace their outdated ‘Stevens’ test machine used to measure the force to ‘squash’ a tennis ball.
643
Software
VectorPro torque testing software
VectorPro® software
VectorPro is an advanced torque testing software package developed to perform torque testing on components and products. Capture measurement data graphically and share customised test reports quickly.
Simply choose an ETS loadcell and…
644
Case study
Dashboard button testing
Requirement
Visteon required an automated system to measure the actuation force for dashboard buttons and check the electrical contact closure points.
645
Case study
Force de rétention en traction de vis sur matériaux de construction
Exigence
Un important fabricant et distributeur de charpentes de toiture de bâtiment en métal destinés au secteur de la construction souhaitait connaître la force d'arrachement des vis fixées sur des matériaux de construction.
646
Case study
Test de force sur Flip Cap
Exigence
Un système d'essai est nécessaire pour vérifier la force d'ouverture des couvercles à capuchon basculant. Ce banc d'essai doit pouvoir recevoir 3 bouchons de diamètre différent avec un changement de montage minimal.
647
Case study
Test de force d'activation des boutons sur tableau de bord
Exigence
Visteon avait besoin d'un système automatisé pour mesurer la force d'actionnement des boutons du tableau de bord et vérifier les points de fermeture des contacts électriques.
648
Case study
Force de rupture en flexion sur buse en aluminium
Exigence
Un important fournisseur mondial de dispositifs et de composants de gaz médicaux avait besoin de faire des tests de contrôle qualité pour évaluer une partie d’un nouveau produit.
649
Case study
Essais de dispositif d'administration de vaccins et son emballage
Exigence
Étant donné que COVID-19 s'est rapidement propagé dans le monde entier, il existe un effort mondial concerté pour trouver un vaccin.
650
Case study
Wire rope termination crimp safety
Requirement
TECNI Ltd., manufactures and supplies a range of steel, braided and wire rope assemblies for applications as diverse as security locks, balustrades, marine rigging, winching systems and gym equipment.