Search results
2026
Accessory
Pyramid (serrated) jaws, 30 x 30 mm, 0.5 set
Mec240k-BP
Pyramid Jaws (30mm x 30mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
2027
Accessory
Compression Plate, Nickel-Plated, 12 mm, M6
432-188 F95
12mm nickel-plated compression plate fitted with M6 female thread. Nickel-plated compression plates are resistant to rusting.
2028
Accessory
Large Single-action Vice Grip, pyramid-faced, 2 kN, QC-20 fitting
432-267
A Large Single-action Vice Grip featuring one fixed jaw and one jaw as freely adjustable to mechanically clamp the specimen in place.
Rated to 2 kN in tension with pyramid-faced jaws of 78mm wide x 28mm high having an opening of 0-9mm. Provides…
2029
Accessory
Crosshead Extension and Elevated Base Plate
432-406
The 38mm crosshead extension and elevated base plate are supplied together. They are used for fitting larger samples up to 200 mm diameter, to a single-column MultiTest system. When fitted, the cantilever effect of such an extension serves to reduce the…
2030
Accessory
Heavy-duty Vice Grip - Single Action, 20 kN, QC-20 fitting
Mec154-20
MEC 154-20 (body only - steel):
A Single-action Heavy-duty Vice Grip allowing one jaw to be manually set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place.…
2031
Accessory
Compression Plate, Nickel-Plated, 19 mm, M6
432-005
19mm nickel-plated compression plate fitted with M6 female thread. Nickel-plated compression plates are resistant to rusting.
2032
Accessory
Diamond-coated Inset jaws, 0.5 set
Mec9-EBD
MEC9-EBD Diamond Jaws
Diamond-coated Inset jaws of 37 mm height x 15 mm width, 0.5 set. For fitting into the carrier of the MEC9 Thin Wire Grip.
Used when jaws need to bite into a soft material to clamp tightly and reduce the risk of slippage.(e.g. soft…
2033
Accessory
Footswitch to simulate 'Start' on MultiTest-i and 'xt' stands
PDV14081
Footswitch to simulate 'Start' on '-i' and 'xt' stands from the Vortex, Helixa and MultiTest product families.
Used to free-up an operators hands for other operations (eg. holding a specimen between grips) when launching a test.
2034
Accessory
Heavy-duty Vice Grip - Single Action, 20 kN, QC-20 fitting
Mec154-20
MEC 154-20 (body only - steel):
A Single-action Heavy-duty Vice Grip allowing one jaw to be manually set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place.…
2035
Accessory
Dial Gauge Bracket Set
432-167
The dial gauge bracket set allows an analogue or digital comparator to be securely fitted to the MDD manual test stand. Digital comparators are suitable for measuring crosshead movement over short distances.
2036
Accessory
TS torque screwdriver chuck, 3/8"
432-233
A standard self-centering 3-jaw chuck with key.
It has a maximum ⅜" (10mm) opening and is connected to the ‘TS’ screwdriver via a square drive spindle. Used to secure a variety of test specimens for torque applications of 1.5 - 10 N.m
2037
Case study
Caractéristiques de couple de précision sur amortisseur rotatif avec engrenage
Exigence
Un fabricant et distributeur mondial de composants utilisés dans de nombreux secteurs, notamment les transports, la beauté, les biens de consommation et les soins de santé, s'est adressé à Mecmesin avec une application de mesure du co
2038
Case study
Calibrateur de pompe à seringue
Exigence
Cardinal Health, fabricant de dispositifs médicaux, fournit aux hôpitaux une gamme de systèmes de perfusion par pompe à seringue.
2039
[Page extract]
Packaging
Mecmesin testing solutions for consumer (primary and secondary) and transit (tertiary) packaging.
2040
[Page extract]
Understanding test standards: industry-specific requirements
To maintain consistency and reliability, compressive strength tests are often governed by established standards.
2041
[Page extract]
Introduction to compressive shear testing
Compressive shear testing is a mechanical test method used to measure a material’s ability to resist shear forces while under compressive load.
2042
[Page extract]
Key applications of torque testing equipment
Torque testing is relevant across many packaging types:
2043
[Page extract]
Analysis and interpretation of results
Interpreting shear failure characteristics
Post-test examination of the bonded joint provides valuable insight into adhesive performance:
2044
[Page extract]
Three-point vs four-point bend testing
In a three-point bend test, force is applied at a single midpoint. In a four-point bend test, two loading noses distribute the load over a larger section of the specimen.
2045
[Page extract]
Introduction to torque testing
Torque testing is a vital part of packaging quality control.
2046
[Page extract]
Types of edge crush tests and methodologies
TAPPI and ISO standards
ECT is governed by internationally recognised standards that ensure accuracy, repeatability, and comparability of results.
2047
[Page extract]
Importance of testing elasticity and ultimate strength
Elasticity determines how well a material returns to its original shape after stretching. Ultimate strength indicates the maximum stress it can withstand before failure.
2048
[Page extract]
Introduction to ergonomic strength testing
Ergonomic strength testing is a structured method for measuring an individual's capacity to perform physical tasks safely and efficiently.
2049
[Page extract]
Applications of tear testing equipment
Tear testing is applied in multiple sectors:
2050
[Page extract]
Speak to an expert
If you need to implement flat crush testing for corrugated fibreboard in line with international standards, Mecmesin can provide the right equipment, fixtures, and expertise.