Search results
1451
Page
Catalogue d'accessoires
Choisir vos accessoires
Pour obtenir des résultats de test précis, il est important que votre échantillon soit fixé et maintenu correctement.
1452
Case study
Adhesive test on capsulated stoppers
Requirement
A capsulated stopper (T-top, Bar-Top or Altop®) is a natural or synthetic cork stopper where the end is glued into a cap of wood, PVC, porcelain, metal, glass or other material.
1453
[Page extract]
How bridge torque is measured
Bridge torque is measured by applying rotational force to a closure until the tamper-evident bridges shear.
1454
[Page extract]
Industry standards and customisation
Alignment with recognised standards
Mecmesin systems support compliance with globally recognised testing standards, including:
1455
Case study
Système d'essai de force de traction sur filet d'échafaudage
Exigence
Huck, un fournisseur de filets d'échafaudage, organise un retour chez le fabricant pour vérifier que les filets ne se sont pas dégradés pendant leur utilisation.
1456
Case study
Clothing button pull-off TTF test
Requirement
The customer was a supplier to major UK clothing retailer Marks & Spencer, who stipulate that all fasteners and attachments must be tested to failure.
1457
[Page extract]
Key testing methods
Different materials require different approaches to compressive hardness testing. The most common methods are:
1458
[Page extract]
Measuring compressive modulus
Common testing methods
Internationally recognised standards specify how compressive modulus is measured for different material types and applications:
1459
Case study
Railcar spring testing
Requirement
Seoul Metropolitan Railway Transit Corporation required a system for testing a variety of springs in their electric railcars. The springs range in size from 3mm to 100 mm in diameter.
1460
Case study
Rotary damper gear precision torque characteristics
Requirement
A global manufacturer and distributor of component parts that are used in products across many industries including transport, beauty, consumer goods and healthcare, came to Mecmesin with a challenging torque measurement applicatio
1461
Event
Tensile Testing for Wiring Harness Connections Webinar
The only way of really knowing the strength of a crimped terminal is to pull it.
1462
[Page extract]
How to conduct a Concora crush test
Step-by-step procedure
Specimen preparation - Cut medium to the required size, typically 152.4 mm by 25.4 mm strips, ensuring clean edges.
1463
[Page extract]
Grab method vs strip method
Compared with the strip method (as defined by ISO 13934-1), which grips the full width of the fabric, the grab method
1464
[Page extract]
Measurement and testing methods
Techniques for measuring tangent modulus
Tangent modulus is measured during tensile or compression testing, w
1465
Case study
Cosmetics tin label peel
Customised engineering example
Testing the adhesive peel strength of packaging labels applied at the post-production stage is more representative of their performance than at the label production stage.
1466
[Page extract]
ISO 34-2 standards explained
ISO 34-2 specifies the Delft tear test procedure for vulcanised or thermoplastic rubber, ensuring testing is carried out under consisten
1467
Case study
Cardboard beverage bottle carrier unfolding
Customised engineering example
A manufacturer of fully-enclosed cartons wanted to quality test the fold-out force for a variety of their designs, used mainly to package drinks bottles and cans.
1468
Event
Tensile Testing for Wiring Harness Connections
The only way of really knowing the strength of a crimped terminal is to pull it. This can reveal production problems, where strand nicks, incorrect crimp height, or effects from changes in terminal supply, may not be clearly apparent.
1469
Page
Contact service
Thank you for contacting our service team
One of our Service Engineers or your local partner will be in touch soon.
1470
[Page extract]
The standard specifies the procedures for measuring the force required for needle penetration and the drag force as the needle travels through a simulated skin or tissue.
1471
[Page extract]
ASTM D1578
Significance and Use
Test Method D1578 for testing any spun yarn for breaking strength is considered satisfactory for acceptance testing of commercial shipments since the method has been used extensively in the trade.
1472
[Page extract]
What is Young’s modulus?
Young’s modulus - also known as the modulus of elasticity or elastic modulus - defines how stiff a material is when a force is applied.
1473
[Page extract]
ASTM D2062
The method(s) in the standard along with those in Test Methods D 2051, D 2052, D 2053, D 2054, D 2057, D 2058, D 2059, D 2060, and D 2061 are a collection of proven test methods.
1474
[Page extract]
Real-time data analysis and reporting
Mecmesin’s software platform offers live monitoring and evaluation of test performance:
1475
[Page extract]
Introduction to penetration and puncture resistance testing
Penetration and puncture resistance testing are essential for evaluating how well a material can withstand force from sharp, pointed, or blunt objects.