Search results
651
Accessory
FINAT 1 Peel Jig for 180 degree testing, QC-20
PDV13016-C
FINAT 1 Peel Jig - 180°
A polished steel plate used for affixing pressure-sensitive adhesive tape in accordance with FINAT 1 test method and other international standards.
Fitted with an adaptor having QC-20mm female hole for connection to the base of…
652
Case study
Elongation test of infusion solution bag
Requirement
Fresenius Kabi is a global manufacturer of pharmaceutical products and delivery systems for infusion therapies and clinical nutrition.
653
Accessory
Bench mounting stand for 'TS' Static Torque Screwdrivers
432-402
Bench mounting stand used for fixing the mid-torque range of 'TS' Static Torque Screwdrivers.
A clearance hole at each end allows the stand to be securely fixed to a bench.
Note: Not suitable for fixing the low-torque range of 'TTH' Mini Torque…
654
Accessory
Horizontal feet kit for 2.5 kN single-column test stand (on side)
PDV11065
Feet kit for the horizontal operation of a MultiTest motorised test.
When fitted the front panel of the test stand will be on its side for ease-of-operation by the user.
655
Case study
Flip-cap force test
Requirement
A repeatable test system to check the opening force of flip cap lids, accommodating 3 different diameter caps with minimal fixture changeover.
656
Accessory
Square Perforated Aluminium Compression Plate, 200 x 200 mm, QC-20 or QC-32 fitting
Mec36L-200-L6x20
MEC36L-200-L6x20
Square Compression Plate in aluminium featuring perforations to allow air release during testing - suitable for foam testing. Holes are 6mm diameter and spaced at 20mm intervals.
Dimensions: 200mm x 200mm.
Fitted with QC-20mm or 32mm…
657
Accessory
Diamond coated jaws for Mec240k Medium Vice Grip, 30 x 80 mm
Mec240k-BD80
Diamond Jaws (30mm x 80mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = see datasheet for various spans according to the grip body selected.
For materials which need a “bite” to secure a good grip (e.g. soft…
658
Accessory
FINAT 1 Peel Jig for 180 degree testing, QC-20
PDV13016-C
FINAT 1 Peel Jig - 180°
A polished steel plate used for affixing pressure-sensitive adhesive tape in accordance with FINAT 1 test method and other international standards.
Fitted with an adaptor having QC-20mm female hole for connection to the base of…
659
Accessory
Square Perforated Aluminium Compression Plate, 400 x 400 mm, QC-20 or QC-32 fitting
Mec36L-400-L6x20
MEC36L-400-L6x20
Square Compression Plate in aluminium featuring perforations to allow air release during testing - suitable for foam testing. Holes are 6mm diameter and spaced at 20mm intervals.
Dimensions: 400mm x 400mm.
Fitted with QC-20mm or 32mm…
660
Accessory
Co-efficient of Friction (COF) Sled for ASTM D1894 and ISO 8295, 200g (foam), FPT-H1
432-633
A neoprene-faced sled with magnetic grips, for testing coefficient of friction of paper samples to TAPPI T549. Supplied with rigid and extensible links.
For use on the FPT-H1 Friction Tester.
661
Accessory
Cable tie break fixture for CrimpTest-1 kN
432-653
Cable-tie Break Fixture for CrimpTest-1
The Cable-tie Break Fixture comprises 2 split halves each having semi-circular stepped bollards for testing the tensile strength of cable-ties. There are 3 steps of 10 mm height steps to accommodate various length…
662
Accessory
Rubber jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 80 mm
Mec240k-BG80
Rubber-faced Jaws (30mm x 80mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = see datasheet for various spans according to the grip body selected.
For fragile samples, which may get weakened by pinching at the contact-…
663
Accessory
Dual Footswitches (locking type) for pneumatic grips
Mec205-2
Pneumatic grips are the ideal choice when performing tensile tests on sensitive materials that have a tendency to slip or break at point of clamping.
Mec 205-2:
Locking dual footswitches open the jaws of the grip by pressing the foot pedal and remain…
664
[Page extract]
Standards and guidelines
Accurate and comparable cleavage strength testing depends on following recognised international standards.
665
Case study
Tennis ball compression test
Requirement
The ITF (International Tennis Federation) invited Mecmesin to bid for a project to replace their outdated ‘Stevens’ test machine used to measure the force to ‘squash’ a tennis ball.
666
Case study
Tests de pénétration de plaques de plâtre pour vérifier leur performance et leur durabilité
Exigence
Saint-Gobain (British Gypsum) sont des leaders dans la conception; production et distribution de matériaux pour la construction; industriels et grand public et sont le plus grand distributeur européen de matériaux de construction.
667
Event
Critical strength: Perfecting catalyst and pellet crush testing
Catalysts are widely used in industrial processes where yield and time issues are critical to forming a product as soon as possible.
668
[Page extract]
The process of tension testing
Tension testing follows a defined process to ensure accuracy and repeatability:
669
[Page extract]
How is ultimate compressive strength tested?
Equipment and procedure
Testing is typically performed using a universal testing machine (UTM) fitted with flat or contoured
670
Case study
Lancet needle retention test
Requirement
A UK based medical device company who design and manufacture a range of blood glucose monitoring and control equipment used by healthcare professionals and consumers across the globe, needed a test solution to ensure the quality of
671
Case study
Test de force sur Flip Cap
Exigence
Un système d'essai est nécessaire pour vérifier la force d'ouverture des couvercles à capuchon basculant. Ce banc d'essai doit pouvoir recevoir 3 bouchons de diamètre différent avec un changement de montage minimal.
672
Case study
Force de rétention en traction de vis sur matériaux de construction
Exigence
Un important fabricant et distributeur de charpentes de toiture de bâtiment en métal destinés au secteur de la construction souhaitait connaître la force d'arrachement des vis fixées sur des matériaux de construction.
673
Case study
PCB Solder Joint Shear
Requirement
Millennnium Microtech Thailand, part of Microchip Technology Inc Thailand operates a manufacturing, packaging and testing plant for Printed Circuit Board (PCB) Integrated Circuit (IC) components.
674
Case study
Test de force d'activation des boutons sur tableau de bord
Exigence
Visteon avait besoin d'un système automatisé pour mesurer la force d'actionnement des boutons du tableau de bord et vérifier les points de fermeture des contacts électriques.
675
Case study
Force de rupture en flexion sur buse en aluminium
Exigence
Un important fournisseur mondial de dispositifs et de composants de gaz médicaux avait besoin de faire des tests de contrôle qualité pour évaluer une partie d’un nouveau produit.